Nissan Versa (2024 year). Manual in english

object when backing up to the position

if the object projects over the actual back-
ing up course.

HOW TO PARK WITH PREDICTED
COURSE LINES (if so equipped)

WARNING

•

If the tires are replaced with different
sized tires, the predicted course lines
may be displayed incorrectly.

•

On a snow-covered or slippery road,
there may be a difference between
the predicted course line and the ac-
tual course line.

•

If the battery is disconnected or be-
comes discharged, the predicted
course lines may be displayed incor-
rectly. If this occurs, please perform
the following procedures:

–

Turn the steering wheel from lock
to lock while the engine is running.

–

Drive the vehicle on a straight road
for more than 5 minutes.

•

When the steering wheel is turned
with the ignition switch in the AUTO
ACC position, the predicted course
lines may be displayed incorrectly.

1. Visually check that the parking space is

safe before parking your vehicle.

2. The rear view of the vehicle is displayed

on the screen

when the shift lever is

moved to the R (Reverse) position.

3. Slowly back up the vehicle adjusting the

steering wheel so that the predicted
course lines

enter the parking space

LHA5043

LHA4770

4-12

Monitor, climate, audio, phone and voice recognition systems

4. Maneuver the steering wheel to make

the vehicle width guide lines

parallel

to the parking space

while referring

to the predicted course lines.

5. When the vehicle is parked in the space

completely, move the shift lever to the P
(Park) position and apply the parking
brake.

ADJUSTING THE SCREEN

For vehicles with CAMERA button

1. While on the main menu screen, touch

the “Settings” key.

2. Touch the “Camera” key.

3. Touch the “Display Settings” key.

4. Touch the “Brightness”, “Contrast”, Tint”,

“Color”, or “Black Level” key.

5. Adjust the item by touching the “+” or “–”

key on the touch-screen display.

For vehicles with DISP button

1. While on the main menu screen, touch

the “Settings” key.

2. Touch the “Camera” key.

3. Touch the “Brightness”, “Contrast”, Tint”,

“Color”, or “Black Level” key.

4. Adjust the item by touching the “+” or “–”

key on the touch-screen display.

NOTE:

Do not adjust any of the display settings
of the RearView Monitor while the ve-
hicle is moving.

HOW TO TURN ON AND OFF
PREDICTED COURSE LINES (if so
equipped)

To toggle on and off the predicted course
lines while in the P (Park) position:

1. Press the CAMERA button.

2. Touch the “Predicted Course Lines” key

to turn the feature on or off.

To toggle on and off the predicted course
lines while in the R (Reverse) position, press
the CAMERA button.

LHA5047

Monitor, climate, audio, phone and voice recognition systems

4-13

REARVIEW MONITOR SYSTEM
LIMITATIONS

WARNING

Listed below are the system limitations
for RearView Monitor. Failure to oper-
ate the vehicle in accordance with
these system limitations could result in
serious injury or death.

•

The system cannot completely elimi-
nate blind spots and may not show
every object.

•

Underneath the bumper and the cor-
ner areas of the bumper cannot be
viewed on the RearView Monitor be-
cause of its monitoring range limita-
tion. The system will not show small
objects below the bumper, and may
not show objects close to the bum-
per or on the ground.

•

Objects

viewed

the

RearView

Monitor differ from actual distance
because a wide-angle lens is used.

•

Objects in the RearView Monitor will
appear visually opposite compared
to when viewed in the rearview and
outside mirrors.

•

Use the displayed lines as a refer-
ence. The lines are highly affected by
the number of occupants, fuel level,
vehicle position, road conditions and
road grade.

•

Make sure that the trunk is securely
closed when backing up.

•

Do not put anything on the rearview
camera. The rearview camera is in-
stalled above the license plate.

•

When washing the vehicle with high
pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing
water condensation on the lens, a
malfunction, fire or an electric shock.

•

Do not strike the camera. It is a preci-
sion instrument. Otherwise, it may
malfunction or cause damage result-
ing in a fire or an electric shock.

The following are operating limitations and
do not represent a system malfunction:
• When the temperature is extremely high

or low, the screen may not clearly display
objects.

• When strong light directly shines on the

camera, objects may not be displayed
clearly.

• Vertical lines may be seen in objects on

the screen. This is due to strong reflected
light from the bumper.

• The screen may flicker under fluorescent

light.

• The colors of objects on the RearView

Monitor may differ somewhat from the
actual color of objects.

• Objects on the monitor may not be clear

in a dark environment.

• There may be a delay when switching

between views.

• If dirt, rain or snow accumulate on the

camera, the RearView Monitor may not
display objects clearly. Clean the camera.

• Do not use wax on the camera lens. Wipe

off any wax with a clean cloth dampened
with a diluted mild cleaning agent, then
wipe with a dry cloth.

4-14

Monitor, climate, audio, phone and voice recognition systems

SYSTEM MAINTENANCE

CAUTION

•

Do not use alcohol, benzine or thinner
to clean the camera. This will cause
discoloration.

•

Do not damage the camera as the moni-
tor screen may be adversely affected.

If dirt, rain or snow accumulates on the
camera

, the RearView Monitor may not

display objects clearly. Clean the camera
by wiping it with a cloth dampened with
a diluted mild cleaning agent and then
wiping it with a dry cloth.

Adjust the air flow direction of the vents by
opening, closing or rotating.

Adjust the air flow direction of the vents by
moving the slide as indicated.

LHA5234

SAA3126

Side vents

LHA5224

Center vents

VENTS

Monitor, climate, audio, phone and voice recognition systems

4-15

WARNING

•

The air conditioner cooling function op-
erates only when the engine is running.

•

Do not leave children or adults who
would normally require the assis-
tance of others alone in your vehicle.
Pets should also not be left alone.
They could accidentally injure them-
selves or others through inadvertent
operation of the vehicle. Also, on hot,
sunny days, temperatures in a closed
vehicle could quickly become high
enough to cause severe or possibly
fatal injuries to people or animals.

•

Do not use the recirculation mode for
long periods as it may cause the inte-
rior air to become stale and the win-
dows to fog up.

NOTE:
• Odors from inside and outside the ve-

hicle can build up in the air conditioner
unit. Odor can enter the passenger
compartment through the vents.

• When parking, set the heater and air

conditioner controls to turn off air re-
circulation to allow fresh air into the
passenger compartment. This should
help reduce odors inside the vehicle.

CONTROLS

Air flow control dial

A/C (air conditioner) button

Fan speed control dial

Air recirculation button

Temperature control dial

Fresh air intake button

Rear window and outside mirror

(if so equipped) defroster switch

LHA4202

HEATER AND AIR CONDITIONER
(manual) (if so equipped)

4-16

Monitor, climate, audio, phone and voice recognition systems

Fan speed control dial

The

fan speed control dial turns the

fan on and off and controls fan speed.

Air flow control dial

The air flow control dial allows you to select
the air flow outlets.

— Air flows from center and side

vents.

— Air flows from center and side

vents and foot outlets.

— Air flows mainly from the foot

outlets.

— Air flows from defroster

outlets and the foot outlets.

— Air flows mainly from

defroster outlets.

Temperature control dial

The temperature control dial allows you to
adjust the temperature of the outlet air. To
lower the temperature, turn the dial to the
left. To increase the temperature, turn the
dial to the right.

Fresh air intake

Press the

fresh air intake button to

draw outside air into the passenger
compartment.

Air recirculation

Press the

air recirculation button to

recirculate interior air inside the vehicle.

The air recirculation cannot be activated
when the air conditioner is in the

front

defrosting mode.

A/C (air conditioner) button

Start the engine, turn the

fan speed

control dial to the desired position and
press the

button to turn on the air

conditioner. To turn off the air conditioner,
press the

button again.

The air conditioner cooling function op-
erates only when the engine is running.

Rear window and outside mirror
(if so equipped) defroster switch

For additional information, see “Rear win-
dow and outside mirror (if so equipped)
defroster switch” (P. 2-44).

HEATER OPERATION

Heating

This mode is used to direct heated air to
the foot outlets. Some air also flows from
the defrost outlets.

1. Press the

button for normal heat-

ing. The indicator light on the

but-

ton will go off.

2. Turn the airflow control dial to the

position.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to the

desired position between the middle
and the hot position.

Ventilation

This mode directs outside air to the side
and center vents.

1. Press the

button. The indicator light

on the

button will go off.

2. Turn the air flow control dial to the

position.

3. Turn the

fan speed control dial to

the desired position.

Monitor, climate, audio, phone and voice recognition systems

4-17

4. Turn the temperature control dial to the

desired position.

Defrosting or defogging

This mode directs the air to the defrost
outlets to defrost/defog the windows.

1. Turn the air flow control dial to the

position.

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to the

desired position between the middle
and the hot position.

• To quickly remove ice or fog from the win-

dows, turn the

fan speed control dial

to the right and the temperature control
to the full HOT position.

Bi-level heating

The bi-level mode directs warmed air to
the side and center vents and to the foot
outlets.

1. Press the

button. The indicator light

on the

button will go off.

2. Turn the airflow control dial to the

position.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to the

desired position.

Heating and defogging

This mode heats the interior and defogs
the windshield.

1. Turn the air flow control dial to the

position.

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to the

desired position between the middle
and the hot position.

• If in the

mode for more than 1

minute, the air conditioning system will
continue to operate until the vehicle is
shut off. This dehumidifies the air which
helps defog the windshield. The
mode automatically turns off, allowing
outside air to be drawn into the passen-
ger compartment to further improve the
defogging performance.

Operating tips

Clear snow and ice from the wiper blades
and air inlet in front of the windshield.
This improves heater operation.

AIR CONDITIONER OPERATION

Start the engine, turn the

fan speed

control dial to the desired position, and
press the

button to activate the air

conditioner. When the air conditioner is on,
cooling and dehumidifying functions are
added to the heater operation.

The air conditioner cooling function op-
erates only when the engine is running.

Cooling

This mode is used to cool and dehumidify
the air.

1. Press the

button.

2. Turn the air flow control dial to the

position.

3. Turn the

fan speed control dial to

the desired position.

4. Press the

button.

5. Turn the temperature control dial to the

desired position.

4-18

Monitor, climate, audio, phone and voice recognition systems

• For quick cooling when the outside tem-

perature is high, press the

button.

The indicator light on the

button will

come on. Press the

button for nor-

mal cooling. The indicator light on the

button will go off.

Dehumidified heating

This mode is used to heat and dehumidify
the air.

1. Press the

button. The indicator light

on the

button will go off.

2. Turn the air flow control dial to the

position.

3. Turn the

fan speed control dial to

the desired position.

4. Press the

button on.

5. Turn the temperature control dial to the

desired position.

Dehumidified defogging

This mode is used to defog the windows
and dehumidify the air.

1. Turn the air flow control dial to the

position.

2. Turn the

fan speed control dial to

the desired position.

3. Press the

button. The indicator

light comes on.

When the

or positions in be-

tween are selected, the air conditioner au-
tomatically turns on. The air conditioning
system will continue to operate until the
fan speed control dial is turned to OFF or
the vehicle is shut off, even if the air flow
control dial is turned to a position other
than the

position. This dehumidifies

the air which helps defog the windshield.
The

mode automatically turns off, al-

lowing outside air to be drawn into the pas-
senger compartment to further improve
the defogging performance.

4. Turn the temperature control dial to the

desired position.

Operating tips

• Keep the windows closed while the air

conditioner is in operation.

• After parking in the sun, drive for two or

three minutes with the windows open to
vent hot air from the passenger com-
partment. Then, close the windows. This
allows the air conditioner to cool the inte-
rior more quickly.

•

The air conditioning system should be
operated for approximately ten min-
utes at least once a month. This helps
prevent damage to the system due to
lack of lubrication.

• A visible mist may be seen coming from

the ventilators in hot, humid conditions
as the air is cooled rapidly. This does not
indicate a malfunction.

•

If the high temperature warning light

illuminates in red indicating en-

gine coolant temperature is over the
normal range, turn the air conditioner
off. For additional information, see “If
your vehicle overheats” (P. 6-11).

AIR FLOW CHARTS

The following charts show the button and
dial positions for

MAXIMUM AND QUICK

heating, cooling or defrosting.

The

air

recirculation button should always be
in the OFF position for heating and de-
frosting.

Monitor, climate, audio, phone and voice recognition systems

4-19

Temperature control dial /AUTO button

Heated seat switches (if so

equipped)

Display Screen

Fan speed control dial/A/C

(air conditioner) button

Air recirculation button

Rear window and outside mirror

(if so equipped) defroster switch

(manual air flow control) button

Front defroster button

ON-OFF button

WARNING

•

The air conditioner cooling function op-
erates only when the engine is running.

•

Do not use the recirculation mode for
long periods as it may cause the inte-
rior air to become stale and the win-
dows to fog up.

NOTE:
• Odors from inside and outside the ve-

hicle can build up in the air conditioner
unit. Odor can enter the passenger
compartment through the vents.

• When parking, set the heater and air

conditioner controls to turn off air re-
circulation to allow fresh air into the
passenger compartment. This should
help reduce odors inside the vehicle.

LHA6510

HEATER AND AIR CONDITIONER
(automatic) (if so equipped)

Monitor, climate, audio, phone and voice recognition systems

4-23

AUTOMATIC OPERATION

Cooling and/or dehumidified
heating (AUTO)

This mode may be used all year round as
the system automatically works to keep a
constant temperature. Air flow distribution
and fan speed are also controlled auto-
matically.

1. Press the AUTO button.

2. Turn the temperature control dial to the

left or right to set the desired tempera-
ture.

• The temperature of the passenger com-

partment will be maintained automati-
cally. Air flow distribution and fan speed
are also controlled automatically.

• A visible mist may be seen coming from

the vents in hot, humid conditions as the
air is cooled rapidly. This does not indicate
a malfunction.

Heating (A/C OFF)

The air conditioner does not activate. When
you need to heat only, use this mode.

1. Press the AUTO button.

2. Turn the temperature control dial to set

the desired temperature.

• The temperature of the passenger com-

partment will be maintained automati-
cally. Air flow distribution and fan speed
are also controlled automatically.

• Do not set the temperature lower than

the outside air temperature. Otherwise,
the system may not work properly.

• Not recommended if windows fog up.

Dehumidified defrosting or
defogging

1. Press the

front defroster button.

2. Turn the temperature control dial to set

the maximum temperature to aid in
defogging.

• To quickly remove ice from the outside of

the windows, use the

fan speed con-

trol dial to set the fan speed to maximum.

• As soon as possible after the windshield

is clean, press the AUTO button to return
to the automatic mode.

• When the

front defroster button is

pressed, the air conditioner will automati-
cally be turned on.

Remote Engine Start with
Intelligent Climate Control (if so
equipped)

Vehicles equipped with automatic climate
controls and Remote Engine Start function
may go into automatic heating or cooling
mode when Remote Engine Start is acti-
vated depending on outside and cabin
temperatures. During this period, the cli-
mate control display and buttons will be
inoperable until the ignition switch is
placed in the ON position. In Remote En-
gine Start defrosting mode, the rear win-
dow defroster and heated seats (if so
equipped) may be activated automatically.

MANUAL OPERATION

Fan speed control

Turn the

fan speed control dial to

manually control the fan speed.

Press the AUTO button to return to auto-
matic control of the fan speed.

Temperature control dial

The temperature control dial allows you to
adjust the temperature of the outlet air.
To lower the temperature, turn the dial to

4-24

Monitor, climate, audio, phone and voice recognition systems

the left. To increase the temperature, turn
the dial to the right.

Air recirculation

Press the

air recirculation button to

recirculate interior air inside the vehicle.

A/C (air conditioner) button

Start the engine, turn the

fan speed

control dial to the desired position and
press the

button to turn on the air

conditioner. To turn off the air conditioner,
press the

button again.

The air conditioner cooling function op-
erates only when the engine is running.

Air flow control

Press the

button to manually control

air flow and select the air outlet.

—

Air flows from center and side
vents.

—

Air flows from center and side
vents and foot outlets.

—

Air flows mainly from foot
outlets.

—

Air flows from defroster and foot
outlets.

To turn system off

To turn off the heater and air conditioner,
press the ON-OFF button. Press the ON-
OFF button again, the system will turn on in
the mode which was used immediately
before the system was turned off.

Rear window and outside mirror
(if so equipped) defroster switch

For additional information, see “Rear win-
dow and outside mirror (if so equipped)
defroster switch” (P. 2-44).

Heated seat switches (if so
equipped)

For additional information, see “Heated
seat switches” (P. 2-52).

OPERATING TIPS

The sunload sensor, located on the driver’s
side of the instrument panel, as shown,
helps the system maintain a constant
temperature. Do not put anything on or
around this sensor.
• When the engine coolant temperature

and outside air temperature are low, the
air flow from the foot outlets may not
operate for a maximum of 150 seconds.
However, this is not a malfunction. After
the coolant temperature warms up, air
flow from the foot outlets will operate
normally.

LHA4125

Monitor, climate, audio, phone and voice recognition systems

4-25

• If you feel that the air flow mode you have

selected and the outlets the air is coming
out do not match, select the

mode.

• When you change the air flow mode, you

may feel air flow from the foot outlets for
just a moment. This is not a malfunction.

The air conditioner system in your NISSAN
vehicle is charged with a refrigerant de-
signed with the environment in mind.

This refrigerant does not harm the earth's
ozone layer.

Special charging equipment and lubricant is
required when servicing your NISSAN air
conditioner. Using improper refrigerants or
lubricants will cause severe damage to your
air conditioner system. For additional infor-
mation, see “Air conditioner system refriger-
ant and oil recommendations” (P. 10-8).

It is recommended that you visit a NISSAN
dealer to service your “environmentally
friendly” air conditioning system.

WARNING

The air conditioner system contains
refrigerant under high pressure. To
avoid personal injury, any air condi-
tioner service should be done only by
an experienced technician with proper
equipment.

RADIO

When the ignition is placed in the AUTO
ACC or ON position, press the PUSH
(power) button to turn the radio on. If you
listen to the radio with the engine not run-
ning, the ignition should be placed in the
AUTO ACC position.

Radio reception is affected by station sig-
nal strength, distance from radio transmit-
ter, buildings, bridges, mountains and other
external influences. Intermittent changes
in reception quality normally are caused by
these external influences.

Using a cellular phone in or near the ve-
hicle may influence radio reception quality.

Radio reception

Your NISSAN radio system is equipped with
state-of-the-art electronic circuits to en-
hance radio reception. These circuits are
designed to extend reception range, and to
enhance the quality of that reception.

However, there are some general charac-
teristics of both FM and AM radio signals
that can affect radio reception quality in
a moving vehicle, even when the finest

SERVICING AIR CONDITIONER

AUDIO SYSTEM

4-26

Monitor, climate, audio, phone and voice recognition systems

equipment is used. These characteristics
are completely normal in a given reception
area and do not indicate any malfunction
in your NISSAN radio system.

Reception

conditions

will

constantly

change because of vehicle movement.
Buildings, terrain, signal distance and inter-
ference from other vehicles can work
against ideal reception. Described below
are some of the factors that can affect your
radio reception.

Some cellular phones or other devices may
cause interference or a buzzing noise to
come from the audio system speakers.
Storing the device in a different location
may reduce or eliminate the noise.

FM RADIO RECEPTION

Range: FM range is normally limited to 25 –
30 mi (40 – 48 km), with monaural (single
channel) FM having slightly more range
than stereo FM. External influences may
sometimes interfere with FM station re-
ception even if the FM station is within
25 mi (40 km). The strength of the FM signal
is directly related to the distance between
the transmitter and receiver. FM signals fol-
low a line-of-sight path, exhibiting many of
the same characteristics as light. For ex-
ample, they will reflect off objects.

Fade and drift: As your vehicle moves away
from a station transmitter, the signals will
tend to fade and/or drift.

Static and flutter: During signal interfer-
ence from buildings, large hills or due to
antenna position (usually in conjunction
with increased distance from the station
transmitter), static or flutter can be heard.
This can be reduced by adjusting the treble
control to reduce treble response.

Multipath reception: Because of the reflec-
tive characteristics of FM signals, direct and
reflected signals reach the receiver at the
same time. The signals may cancel each
other, resulting in momentary flutter or loss
of sound.

AM RADIO RECEPTION

AM signals, because of their low frequency,
can bend around objects and skip along
the ground. In addition, the signals can be
bounced off the ionosphere and bent back
to earth. Because of these characteristics,
AM signals are also subject to interference
as they travel from transmitter to receiver.

Fading: Occurs while the vehicle is passing
through freeway underpasses or in areas
with many tall buildings. It can also occur

for several seconds during ionospheric tur-
bulence even in areas where no obstacles
exist.

Static: Caused by thunderstorms, electrical
power lines, electric signs and even traffic
lights.

AUDIO OPERATION PRECAUTIONS

MP3 or WMA terms

• MP3 — MP3 is short for Moving Pictures

Experts Group Audio Layer 3. MP3 is the
most well-known compressed digital au-
dio file format. This format allows for near
“CD quality” sound, but at a fraction of the
size of normal audio files. MP3 conversion
of an audio track from CD-ROM can re-
duce the file size by approximately a 10:1
ratio with virtually no perceptible loss in
quality. MP3 compression removes the re-
dundant and irrelevant parts of a sound
signal that the human ear doesn’t hear.

• WMA — Windows Media Audio (WMA)* is a

compressed audio format created by Mi-
crosoft as an alternative to MP3. The WMA
codec offers greater file compression
than the MP3 codec, enabling storage of
more digital audio tracks in the same
amount of space when compared to
MP3s at the same level of quality.

Monitor, climate, audio, phone and voice recognition systems

4-27

• Bit rate — Bit rate denotes the number of

bits per second used by a digital music
file. The size and quality of a compressed
digital audio file is determined by the bit
rate used when encoding the file.

• Sampling frequency — Sampling fre-

quency is the rate at which the samples
of a signal are converted from analog to
digital (A/D conversion) per second.

• Multisession — Multisession is one of the

methods for writing data to media. Writ-
ing data once to the media is called a
single session, and writing more than
once is called a multisession.

• ID3/WMA Tag — The ID3/WMA tag is the

part of the encoded MP3 or WMA file that
contains information about the digital
music file such as song title, artist, encod-
ing bit rate, track time duration, etc. ID3
tag information is displayed on the Artist/
song title line on the display.

* Windows® and Windows Media® are reg-
istered trademarks and trademarks in the
United States of America and other coun-
tries of Microsoft Corporation of the USA.

USB (Universal Serial Bus)
connection port

WARNING

Do not connect, disconnect or operate
the USB device while driving. Doing so
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.

CAUTION

•

Do not force the USB device into the
USB port. Inserting the USB device
tilted or up-side-down into the port
may damage the port. Make sure
that the USB device is connected cor-
rectly into the USB port.

•

Do not grab the USB port cover (if so
equipped) when pulling the USB
device out of the port. This could
damage the port and the cover.

•

Do not leave the USB cable in a place
where it can be pulled unintention-
ally. Pulling the cable may damage
the port.

The vehicle is not equipped with a USB de-
vice. USB devices should be purchased
separately as necessary.

This system cannot be used to format USB
devices. To format a USB device, use a per-
sonal computer.

In some jurisdictions, the USB device for the
front seats plays only sound without im-
ages for regulatory reasons, even when the
vehicle is parked.

This system supports various USB memory
devices, USB hard drives and iPod® players.
Some USB devices may not be supported by
this system.
• Partitioned USB devices may not play

correctly.

• Some characters used in other lan-

guages (Chinese, Japanese, etc.) may not
appear properly in the display. Using
English language characters with a USB
device is recommended.

General notes for USB use

• For additional information, refer to your

device manufacturer's owner informa-
tion regarding the proper use and care of
the device.

4-28

Monitor, climate, audio, phone and voice recognition systems

Notes for iPod® use

iPod® is a trademark of Apple Inc., regis-
tered in the U.S. and other countries.
• Improperly plugging in the iPod® may

cause a checkmark to be displayed on
and off (flickering). Always make sure that
the iPod® is connected properly.

• An iPod® nano (1st Generation) may remain

in fast forward or rewind mode if it is con-
nected during a seek operation. In this
case, please manually reset the iPod®.

• An iPod® nano (2nd Generation) will con-

tinue to fast-forward or rewind if it is dis-
connected during a seek operation.

• An incorrect song title may appear when

the Play Mode is changed while using an
iPod® nano (2nd Generation).

• Audiobooks may not play in the same

order as they appear on an iPod®.

• Large video files cause slow responses in

an iPod®. The vehicle center display may
momentarily black out, but will soon
recover.

• If an iPod® automatically selects large

video files while in the shuffle mode, the
vehicle center display may momentarily
black out, but will soon recover.

iPod®* player

• Some characters used in other lan-

guages (Chinese, Japanese, etc.) are not
displayed properly on the vehicle center
screen. We recommend using English or
Spanish language characters with an
iPod®.

• Large video podcast files cause slow re-

sponses in the iPod®. The vehicle center
display may momentarily black out, but it
will soon recover.

• If the iPod® automatically selects large

video podcast files while in the shuffle
mode, the vehicle center display may mo-
mentarily black out, but it will soon recover.

• Improperly plugging in the iPod® may

cause a checkmark to be displayed on
and off (flickering). Always make sure that
the iPod® is connected properly.

• The iPod® nano (2nd Generation) will con-

tinue to fast forward or rewind if it is dis-
connected during a seek operation.

• An incorrect song title may appear when

the Play Mode is changed while using the
iPod® nano (2nd Generation).

• Audiobooks may not play in the same

order as they appear on the iPod®.

• The iPod® nano (1st Generation) may re-

main in fast forward or rewind mode if it is
connected during a seek operation. In this
case, please manually reset the iPod®.

• If you are using an iPod® (3rd Generation

with Dock connector), do not use very
long names for the song title, album
name or artist name to prevent the iPod®
from resetting itself.

• Be careful not to do the following, or the

cable could be damaged and a loss of
function may occur:

– Bend the cable excessively (1.6 in (40

mm) radius maximum).

– Twist the cable excessively (more than

180 degrees).

– Pull or drop the cable.
– Do not force the iPod® cable connector

into the device port.

– Close the center console lid on the

cable or connectors.

– Store objects with sharp edges in the

storage where the cable is stored.

– Spill liquids on the cable and connectors.

• Do not connect the cable to the iPod® if

the cable and/or connectors are wet. It
may damage the iPod®.

Monitor, climate, audio, phone and voice recognition systems

4-29

• If the cable and connectors are exposed

to water, allow the cable and/or connec-
tors to dry completely before connecting
the cable to the iPod® (wait 24 hours for it
to dry).

• If the connector is exposed to fluids other

than water, evaporative residue may
cause a short between the connector
pins. In this case, replace the cable, other-
wise damage to the iPod® and a loss of
function may occur.

• If the cable is damaged (insulation cut,

connectors cracked, contamination such
as liquids, dust, dirt, etc. in the connec-
tors), do not use the cable. It is recom-
mended that you visit a NISSAN dealer to
replace the cable with a new one.

• When not in use for extended periods of

time, store the cable in a clean, dust free
environment at room temperature and
without direct sun exposure.

• Do not use the cable for any other pur-

poses other than its intended use in the
vehicle.

*iPod® is a trademark of Apple Inc., regis-
tered in the U.S. and other countries.

Bluetooth® streaming audio

• Some Bluetooth® audio devices may not

be recognized by the in-vehicle audio
system.

• It is necessary to set up the wireless con-

nection between a compatible Bluetooth®
audio device and the in-vehicle Bluetooth®
module before using the Bluetooth® audio.

• Operating procedure of the Bluetooth®

audio will vary depending on the devices.
Make sure how to operate your audio de-
vice before using it with this system.

• The Bluetooth® audio may be stopped

under the following conditions:

– Receiving a call on the Bluetooth®

Hands-Free Phone System.

– Checking the connection to the hands-

free phone.

• Do not place the Bluetooth® audio device

in an area surrounded by metal or far
away from the in-vehicle Bluetooth®
module to prevent tone quality degrada-
tion and wireless connection disruption.

• While an audio device is connected

through the Bluetooth® wireless connec-
tion, the battery power of the device may
discharge quicker than usual.

• This system supports the Bluetooth®

Audio Distribution Profile (A2DP, AVRCP).

BLUETOOTH® is a
trademark owned
by Bluetooth SIG, Inc.
and licensed to
Panasonic.

4-30

Monitor, climate, audio, phone and voice recognition systems

FM/AM RADIO

For additional information, see “Audio op-
eration precautions” (P. 4-27).

MENU button

2. Display screen

SEEK button

TRACK button

BACK button

6. PUSH SOUND button / TUNE• SCROLL

knob

7. VOL (volume) knob/PUSH

(power)

button

8. AUDIO button

Audio main operation

VOL (volume) knob / PUSH

(power) button

Place the ignition switch in the AUTO ACC
or ON position and press the PUSH

(power) button while the system is off

to call up the mode (radio, AUX, Bluetooth®
audio, USB or iPod®) that was playing im-
mediately before the system was turned
off.

To turn the system off, press the PUSH

(power) button.

Turn the VOL (volume) control knob to ad-
just the volume.

This vehicle may be equipped with Speed
Sensitive Volume. When this feature is
active, the audio volume changes as the
driving speed changes.

LHA4704

Monitor, climate, audio, phone and voice recognition systems

4-31

MENU button

Press the

MENU button to show the

Menu screen. Touch the “Settings” key on
the display, then touch the “Sound” key.

Sound

Bass

Adjusts the bass to the desired level.

Treble

Adjusts the treble to the desired level.

Balance

Adjusts the balance to the desired level. Balance adjusts the sound level between the left and right speakers.

Fade

Adjusts the fade to the desired level. Fade adjusts the sound level between the front and rear speakers.

Speed Sensitive Volume

Adjusts the speed sensitive volume function, which increases the volume of the audio system as the speed of the
vehicle increases. Set to “OFF” to disable the feature. The higher the setting, the more the volume increases in
relation to vehicle speed.

Bass, treble, balance, fade and Speed Sensitive Volume can be adjusted by touching ”-”/”+”, “L”/”R”, or “R”/”F” keys.

BACK button

Press the

BACK button to return to the

previous menu screen.

AUDIO button

Press to display the audio screen. When
this button is pressed while the audio
screen is not displayed, the last audio
source played will play.

4-32

Monitor, climate, audio, phone and voice recognition systems

AM/FM radio screen

1. “AM Menu” / “FM Menu” key

Touch to display the radio menu screen.

2. “Direct Tune” (if so equipped)

Touch to manually enter a station.

3. Audio source indicator

Indicates the currently selected audio
source.

4. Reception information display

Reception information currently avail-
able such as frequency, station name,
etc. is displayed.

5. Preset list

To listen to a preset station, touch the
corresponding station from the preset
list. If displayed, touch the “

” or “

” keys

to scroll the preset list.

AM radio operation

Press the

MENU button and touch the

“AM” key or press the AUDIO button and
select AM on the bottom of the Launch Bar
to bring up the AM display screen.

If another audio source is playing when the
“AM” key is touched, the audio source play-
ing will automatically be turned off and the
last radio station played will begin playing.

AM Menu

Touch the “AM Menu” key to display the AM
Menu screen options:
• SCAN: To scan the stations, touch the “AM

Menu” key on the radio screen and then
touch the “SCAN” key. The stations will be
turned from low to high frequencies and
stop at each broadcasting station for
several seconds. Touching the “SCAN” key
again during this period of several sec-
onds will stop tuning and the radio will
remain tuned to that station.

• Refresh: Touch the “Refresh” key to up-

date the station list displayed on the right
side of the AM Menu screen.

(SEEK/TRACK) buttons

Press the

buttons to tune

from low to high or high to low frequencies
and to stop at the next broadcasting
station.

Direct Tune

Touch the “Direct Tune” key to display the
Direct Tune menu and manually enter a
station.

1 to 6 station memory operations

Up to six stations can be registered in the
preset list.

1. Select the AM radio band.

2. Tune to the station you wish to store.

3. Touch and hold one of the preset num-

bers in the preset list.

The information such as frequency will be
displayed on the preset list.

To select and listen to the preset stations,
press

on the steering wheel

briefly or touch a preferred station on the
preset list on the radio screen.

LHA4708

Monitor, climate, audio, phone and voice recognition systems

4-33

FM radio operation

Press the

MENU button and touch the

“FM” key or press the AUDIO button and
select FM on the bottom of the Launch Bar
to bring up the FM display screen.

If another audio source is playing when the
“FM” key is pressed, the audio source play-
ing will automatically be turned off and the
last radio station played will begin playing.

The FM stereo indicator (STEREO) is shown
on the screen during FM stereo reception.
When the stereo broadcast signal is weak,
the radio automatically changes from ste-
reo to monaural reception.

FM Menu

Touch the “FM Menu” key to display the FM
Menu screen options:
• SCAN: To scan the stations, touch the “FM

Menu” key on the radio screen and then
touch the “SCAN” key. The stations will be
tuned from low to high frequencies and
stop at each broadcasting stations for
several seconds. Touching the “SCAN” key
again during this period of several sec-
onds will stop tuning and the radio will
remain tuned to that station.

• Refresh: Touch the “Refresh” key to up-

date the station list displayed on the right
side of the FM Menu screen.

• RDS Info: Radio station and song informa-

tion can be displayed on the FM display
screen.

(SEEK/TRACK) buttons

Press the

buttons to tune

from low to high or high to low frequencies
and to stop at the next broadcasting
station.

1 to 12 station memory operations

Up to 12 stations can be registered in the
preset list.

1. Select the FM radio band.

2. Tune to the station you wish to store.

3. Touch and hold one of the preset num-

bers in the preset list.

The information such as frequency will be
displayed on the preset list.

To select and listen to the preset stations,
press

on the steering wheel

briefly or touch a preferred station on the
preset list on the radio screen.

Auxiliary (AUX) devices operation

Connecting auxiliary devices

Connect an AUX device into the AUX input
jack located on the center console below
the heater and air conditioner controls.

The AUX input jack accepts any standard
analog audio input such as from a portable
cassette player, CD player, MP3 player or
phone.

Insert a 1/8 in (3.5 mm) stereo mini plug in
the audio input jack. If a cable with a mono
plug is used, the audio output may not
function normally.

Activation and playing

Turn on the AUX device. Connect an AUX
cable to the AUX device and the AUX input
jack. Select AUX mode from the audio
source menu screen or by pressing the
Source button on the steering wheel.

4-34

Monitor, climate, audio, phone and voice recognition systems

AUX screen

• Audio source indicator

Indicates that the AUX source is currently
playing.

• “Volume Setting” keys

Touch one of the keys to select the sound
output gain from Low, Medium and High.

• AUX from Launch Bar

Touch to change from another source to
AUX.

Additional features

For additional information, see “iPod® player
operation” (P. 4-38) regarding the iPod®
player available with this system.

For additional information, see “USB (Uni-
versal Serial Bus) connection port” (P. 4-35)
regarding the USB connection port avail-
able with this system.

For additional information, see “Bluetooth®
streaming

audio”

(P.

4-41)

about

the

Bluetooth® audio interface available with
this system.

Microsoft (WMA) Obligation of
Labeling

Additional Obligation of Labeling

This product is protected by certain intel-
lectual property rights of Microsoft Cor-
poration and third parties. Use or distribu-
tion of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft sub-
sidiary and third parties.

USB (Universal Serial Bus)
CONNECTION PORT

1. Type-A

Connecting a device to the USB
connection port

WARNING

Do not connect, disconnect, or operate
the USB device while driving. Doing so
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.

LHA4709

LHA6423

Monitor, climate, audio, phone and voice recognition systems

4-35

CAUTION

•

To avoid damage and loss of function
when using a USB device, note the
following precautions.

•

Do not grab the USB port cover (if so
equipped) when pulling the USB de-
vice out of the port. This could dam-
age the port and the cover.

•

Do not leave the USB cable in a place
where it can be pulled unintention-
ally. Pulling the cable may damage
the port.

NOTE:

For best results, it is recommended to
use manufacturer cables, which are sold
separately. A USB Type-A to USB Type-C
adapter (or vice versa) may be available;
however, results may vary.

For additional information, refer to your de-
vice manufacturer's owner information
regarding the proper use and care of the
device.

The USB port is located on the center con-
sole beneath the heater and air condi-
tioner controls. Insert the USB device into
the connection port.

When a compatible storage device is
plugged into the connection port, compat-
ible audio files on the storage device can be
played through the vehicle's audio system.

USB connections screen

Press the

MENU button and touch the

“Connections” key or touch the “Settings”
key and touch the “Connections” key to
change USB settings.
• Auto Change Source

Touch “ON” or “OFF” to change the audio
source settings for USB memory devices
or an iPod® connected through a USB
cable.

LHA4711

4-36

Monitor, climate, audio, phone and voice recognition systems

USB screen

1. “USB Menu” key

Touch to switch to the USB Menu screen.

2. Track information

Track information such as the song
name, artist name and album name are
displayed.

3. Audio source indicator

Indicates the currently selected audio
source.

4. USB operation keys

Touch to control USB playback functions

5. Play time and progress bar

The play time of the track is displayed.
The bar indicates the progress in playing
a track.

USB operation keys

Touch to control USB playback functions.

Keys

Description

Each time “

” key is

touched, the repeat mode
changes.

Touch to return to the begin-
ning of the current track. Touch
again to select the previous
track. Touch and hold to rewind
the current track.

Touch to play the track.

Touch to pause the track.

Touch to select the next track.
Touch and hold to fast-forward
the track.

Each time “

” key is

touched, the random mode
changes.

USB memory device player
operation

Activation and playing

Connecting the USB memory device into
the port will start playing the USB memory.

USB memory device can also be played by
touching the “USB” key on the Menu screen
or by touching USB on the Launch Bar.

To pause playing the USB memory device
touch the “

” key. To resume playing,

touch the “

” key.

Skipping tracks

To skip the tracks, press the

buttons on the control panel or touch the
“

” or “

” keys on the screen repeat-

edly until the preferred track is selected.

NOTE:

Depending on the condition, skipping to
the previous track may require pressing
the button or touching the key twice.
Pressing the button or touching the key
once may only restart the current track
from the beginning.

LHA4710

Monitor, climate, audio, phone and voice recognition systems

4-37

Fast-forwarding/rewinding

To rewind or fast-forward the track, press
and hold the

buttons on the

control panel or touch and hold the “

”

or “

” keys on the screen.

Changing play mode
Repeat mode

Touch the “

” key on the USB screen to

change the repeat mode.
The following modes are available:

All: Repeat all

1 Folder: Repeat folder/sub-folder

1 Track: Repeat track

Random mode

Touch the “

” key on the screen to

change the random mode as follows:

“

” is not highlighted: Random off

“

” highlighted: Random on

USB menu

Touch the “USB Menu” key on the USB
screen to display the USB Menu screen.

“Now Playing” key Touch to display the USB

screen.

“Folder List” key

Touch to display the folder list.
Touch an item on the list to
select the folder. The sub-
folder or track list will be dis-
played. Select a sub-folder or
track from the list.

“Album Artwork”

Touch to run on/off the album
artwork display on the USB
screen.

iPod®* PLAYER OPERATION

1. Type-A

Connecting iPod®

WARNING

Do not connect, disconnect, or operate
the USB device while driving. Doing so
can be a distraction. If distracted you
could lose control of your vehicle and
cause an accident or serious injury.

LHA6423

4-38

Monitor, climate, audio, phone and voice recognition systems

CAUTION

•

Do not grab the USB port cover (if so
equipped) when pulling the USB de-
vice out of the port. This could dam-
age the port and the cover.

•

Do not leave the USB cable in a place
where it can be pulled unintention-
ally. Pulling the cable may damage
the port.

NOTE:

For best results, it is recommended to
use manufacturer cables, which are sold
separately. A USB Type-A to USB Type-C
adapter (or vice versa) may be available;
however, results may vary.

For additional information, refer to your de-
vice manufacturer’s owner information re-
garding the proper use and care of the
device.

To connect an iPod® to the vehicle so that
the iPod® can be controlled with the audio
system controls and display screen, use

the USB connection port located on the
center console below the heater and air
conditioner controls. Connect the iPod®-
specific end of the cable to the iPod® and
the USB end of the cable to the USB con-
nection port on the vehicle. If your iPod®
supports charging via a USB connection, its
battery will be charged while connected to
the vehicle with the ignition switch in the
ON position.

While connected to the vehicle, the iPod®
can only be operated by the vehicle audio
controls.

To disconnect the iPod® from the vehicle,
remove the USB end of the cable from the
USB connection port on the vehicle, then
remove the cable from the iPod®.

* iPod® is a trademark of Apple Inc., regis-
tered in the U.S. and other countries.

Compatibility

The following models are compatible:
• iPod® Classic 5th generation (firmware

version 1.3.0 or later)

• iPod® Classic 6th generation (firmware

version 2.0.1 or later)

• iPod® Classic 7th generation (firmware

version 2.0.4 or later)

• iPod® Touch 2nd generation (firmware

version 4.2.1 or later)*

• iPod® Touch 3rd generation (firmware

version 5.1 or later)

• iPod® Touch 4th generation (firmware

version 5.1 or later)

• iPod® nano - 1st generation (firmware

version 1.3.1 or later)

• iPod® nano - 2nd generation (firmware

version 1.1.3 or later)

• iPod® nano - 3rd generation (firmware

version 1.1.3 or later)

• iPod® nano - 4th generation (firmware

version 1.0.4 or later)

• iPod® nano - 5th generation (firmware

version 1.0.2 or later)

• iPod® nano - 6th generation (firmware

version 1.1 or later)

• iPhone® 3G (firmware version 4.2.1 or later)
• iPhone® 3GS (firmware version 5.1 or later)
• iPhone® 4 (firmware version 5.1 or later)
• iPhone® 4S (firmware version 5.1 or later)

* Some features of this iPod® may not be
fully functional.

Make sure that your iPod® firmware is up-
dated to the version indicated above.

Monitor, climate, audio, phone and voice recognition systems

4-39

iPod screen

1. “iPod Menu” key

Touch to switch to the iPod Menu screen.

2. Track information

Track information such as the song
name, artist name and album name are
displayed.

3. Audio source indicator

Indicates the currently selected audio
source.

4. Album artwork

An image of the album artwork is dis-
played when available if the setting is
turned on.

5. iPod® operation keys

Touch to control iPod® playback functions

6. Play time and progress bar

The play time of the track is displayed.
The bar indicates the progress in playing
a track.

iPod® operation keys

Touch to control iPod® playback functions.

Keys

Description

Each time “

” key is

touched, the repeat mode
changes.

Touch to return to the begin-
ning of the current track. Touch
again to select the previous
track. Touch and hold to rewind
the current track.

Touch to play the track.

Touch to pause the track.

Touch to select the next track.
Touch and hold to fast-forward
the track.

Each time “

” key is

touched, the random mode
changes.

iPod® memory device player
operation

Activation and playing

Connecting the iPod® to the vehicle via USB
cable will activate the iPod® mode.

The iPod® can also be played by touching
the “iPod” key on the Menu screen or by
touching iPod on the Launch Bar.

Skipping tracks

To skip the tracks, press the

buttons on the control panel or touch the
“

” or “

” keys on the screen repeat-

edly until the preferred track is selected.

NOTE:

LHA4724

4-40

Monitor, climate, audio, phone and voice recognition systems

Fast-forwarding/rewinding

To rewind or fast-forward the track, press
and hold the

buttons on the

control panel or touch and hold the “

”

or “

” keys on the screen,

Changing play mode
Repeat mode

Touch the “

” key on the iPod® screen

to change the repeat mode. The following
modes are available.

No text displayed: Repeat off

All: Repeat all

One: Repeat track

Random mode

Touch the “

” key on the screen to

change the random mode as follows.

“

” is not highlighted: Random off

“

” highlighted: Random on

iPod® Menu

Touch the “iPod Menu” key on the iPod®
screen to display the iPod® Menu screen.

“Now Playing” key Touch to display the USB

screen.

“Folder List” key
(if so equipped)

Touch to display the folder list.
Touch an item on the list to
select the folder. The sub-
folder or track list will be dis-
played. Select a sub-folder or
track from the list.

“Album Artwork”
key

Touch to run on/off the album
artwork display on the USB
screen.

“Playlists” key

Touch to display the list
according to the selected
item.

“Artists” key

“Albums” key

“Songs” key

“Podcasts” key

“Genres” key

“Composers” key

“Audiobooks” key

“iTunes Radio”
key

BLUETOOTH® STREAMING AUDIO

If you have a compatible Bluetooth® audio
device that is capable of playing audio files,
the device can be connected to the vehi-
cle's audio system so that the audio files
on the device play through the vehicle's
speakers. For additional information, see
“FM/AM radio” (P. 4-31).

NOTE:

For additional information regarding
Bluetooth® Streaming Audio, refer to the
cellular phone owner’s manual.

Monitor, climate, audio, phone and voice recognition systems

4-41

Connecting procedure

NOTE:

The connecting procedure must be per-
formed when the vehicle is stationary.
If the vehicle starts moving during the
procedure, the procedure will be canceled.

To connect a phone to the Bluetooth®
Hands-Free Phone System:

Manual Connecting Procedure

1. Press the

MENU button on the con-

trol panel.

2. Touch the “Connections” key on the

screen.

3. In the Bluetooth tab, touch the “Add New”

key to connect a phone.

4. When a compatible phone is found a

message with a PIN appears on the
screen.

5. Verify the PIN is correct and accept the

connection.

6. To access the Bluetooth® settings menu

touch the “

” key on the Connections

screen.

The

following

options

are

available:

Menu Item

Result

Bluetooth

Allows user to switch Bluetooth® on and off. Bluetooth® must be turned on in order to connect a device.

Turns Bluetooth® functionality on. To turn off, touch the “ON” key again. The indicator light will go off.

Favorite (Connection first)

Allows user to toggle “Phone” and “Audio” favorite settings on and off.

Allows user to customize the PIN to a four digit number.

Automatic Connecting Procedure

If no phone is connected to the system,
press and hold the

button on the

steering wheel for less than 1.5 seconds.

After the prompt, speak “Add Phone”, the
system will announce “transferring to the
add phone settings menu”. The system will
start the pairing procedure. When a com-
patible phone is found, a message with a

PIN appears on the screen. Operate the
Bluetooth® phone to complete the con-
nection process. For additional informa-
tion, see “Bluetooth® connections screen”
(P. 4-62).

LHA4726

4-42

Monitor, climate, audio, phone and voice recognition systems

Bluetooth® screen

1. “BT Menu” key

Depending on the Bluetooth® version
supported by the connected device, ei-
ther the “BT Menu” key or “Connections”
key is displayed.

2. Track information

Track information such as the song
name, artist name and album name are
displayed.

3. Audio source indicator

Indicates the currently selected audio
source.

4. Bluetooth® audio operation keys

Touch to control Bluetooth® audio play-
back functions

5. Play time and progress bar

The play time of the track is displayed.
The bar indicates the progress in playing
a track.

Bluetooth® operation keys

Touch to control Bluetooth® playback
functions.

Keys

Description

Each time “

” key is

touched, the repeat mode
changes.

Touch to return to the begin-
ning of the current track. Touch
again to select the previous
track. Touch and hold to rewind
the current track.

Touch to play the track.

Touch to pause the track.

Touch to select the next track.
Touch and hold to fast-forward
the track.

Each time “

” key is

touched, the random mode
changes.

Bluetooth® audio operation

The ability to pause, change tracks, fast
forward, rewind, randomize and repeat
music may be different between devices.
Some or all of these functions may not be
supported on each device.

NOTE:

Depending on the Bluetooth® audio de-
vice that is connected, it may not be pos-
sible to perform audio operations or a
delay may occur before music is played
back.

Activation and playing

A Bluetooth® audio device can be played by
touching the “Bluetooth” key on the Menu
screen or by touching Bluetooth on the
Launch Bar.

To pause playing the Bluetooth® audio,
touch the “

” key. Touch the “

” key

to resume playing.

Changing folders

To change folders, touch the “BT Menu” key.

LHA4727

Monitor, climate, audio, phone and voice recognition systems

4-43

Nissan Versa (2024 year). Manual in english - page 7