Nissan Versa (2024 year). Manual in english

Lockout protection

To prevent the Intelligent Key from being
accidentally locked in the trunk, lockout
protection is equipped with the Intelligent
Key system.

When all doors are locked and the trunk lid
is closed with the Intelligent Key inside the
trunk, a chime will sound and the doors will
unlock.

HOW TO USE THE REMOTE
KEYLESS ENTRY FUNCTION

The remote keyless entry function can
operate all door locks using the remote
keyless function of the Intelligent Key. The
remote keyless function can operate at a
distance of 33 ft (10 m) away from the ve-
hicle. The operating distance depends
upon the conditions around the vehicle.

The remote keyless entry function may not
function under the following conditions:
• When the Intelligent Key is not within the

operational range.

• When the doors or the trunk are open or

not closed securely.

• When the Intelligent Key battery is dis-

charged.

CAUTION

When locking the doors using the Intel-
ligent Key, be sure not to leave the key
in the vehicle.

Type A (if so equipped)

(lock) button

(unlock) button

(trunk) button

(panic) button

LDI3700

3-14

Pre-driving checks and adjustments

Type B (if so equipped)

(remote engine start) button

(lock) button

(unlock) button

(trunk) button

(panic) button

Locking doors

1. Place the ignition switch in the LOCK

position.

2. Close all doors.

3. Press the

button on the Intelligent

Key.

4. The hazard indicator lights flash twice

and the horn beeps once.

5. All doors will be locked.

WARNING

After locking the doors using the Intel-
ligent Key, be sure that the doors have
been securely locked by operating the
door handles. Failure to follow these in-
structions may result in inadvertently
unlocking the doors, which may de-
crease the safety and security of your
vehicle.

Unlocking doors

1. Press the

button on the Intelligent

Key to unlock the driver’s door.

2. The hazard indicator lights flash once

and the driver’s door unlocks.

3. Press the

button again within 60

seconds to unlock all doors.

NOTE:

The Selective Unlock feature can be
changed using the “Vehicle Settings”
menu on the vehicle information display.
For additional information, see “Vehicle
information display” (P. 2-25).

All doors will be locked automatically un-
less one of the following operations is per-
formed within 1 minute after pressing the

button:

• Opening any doors.
• Pushing the ignition switch.

Using the interior light

The interior light illuminates for a period of
time when a door is unlocked and the inte-
rior light switch is not in the OFF position.

The light can be turned off without waiting by
performing one of the following operations:
• Placing the ignition switch in the ON

position.

• Locking the doors with the remote control.
• Switching the interior light switch to the

OFF position.

LDI3701

Pre-driving checks and adjustments

3-15

• Switching the Auto Room Lamp feature

to the OFF position in the “Vehicle Set-
tings” menu on the vehicle information
display. For additional information, see
“Vehicle information display” (P. 2-25).

For additional information, see “Interior
lights” (P. 2-69).

Releasing the trunk lid

Press the

button for longer than

0.5 seconds to open the trunk lid. The trunk
release button will not operate when the
ignition switch is placed in the ON position.

Using the panic alarm

If you are near your vehicle and feel threat-
ened, you may activate the panic alarm to
call attention by pressing and holding the

button on the Intelligent Key for

lon-

ger than 0.5 seconds.

The panic alarm and headlights will stay on
for a period of time.

The panic alarm stops when:
• It has run for a period of time.
• Any button is pressed on the Intelligent

Key.

• The request switch (if so equipped) on the

driver or passenger door is pushed and
the Intelligent Key is in range of the door
handle.

Answer back horn feature

If desired, the answer back horn feature
can be deactivated using the Intelligent
Key. When it is deactivated and the
button is pressed, the hazard indicator
lights flash twice. When the

button is

pressed, neither the hazard indicator lights
nor the horn operates.

NOTE:
If you change the Answer Back Horn
and light flash feature with the Intelli-
gent Key, the vehicle information dis-
play screen will show the current mode
after the ignition switch has been
cycled from the OFF to the ON position.
The vehicle information display screen
can also be used to change the answer
back horn mode.
For additional information, see “Vehicle
Settings” (P. 2-32).

To deactivate:

Press and hold the

and

buttons

for at least 6 seconds.

The hazard indica-

tor lights will flash three times to confirm
that the answer back horn feature has
been deactivated.

To activate:

Press and hold the

and

buttons

for at least 6 seconds once more.

The haz-

ard indicator lights will flash once and the
horn will sound once to confirm that the
horn beep feature has been reactivated.

Deactivating the horn beep feature does not
silence the horn if the alarm is triggered.

3-16

Pre-driving checks and adjustments

Intelligent Key button operation
light

The light blinks only when you press any
button on the Intelligent Key. The light illu-
mination only signifies that the key fob has
transmitted a signal. You may look and/or
listen to verify that the vehicle has per-
formed the intended operation.

If the light does not blink, your battery may
be too weak to communicate to the ve-
hicle. If this occurs, the battery may need
to be replaced. For additional information
regarding the replacement of a battery, see
“Battery replacement” (P. 8-22).

APPROACH UNLOCK FUNCTION
(if so equipped)

When you approach the vehicle with the
Intelligent Key, the vehicle will be unlocked
automatically by the approach unlock
function. This function is disabled by the
default setting. You can enable this func-
tion by the vehicle information display. For
additional information, see “Vehicle Set-
tings” (P. 2-32).

WALK AWAY LOCK FUNCTION (if so
equipped)

When you walk away from the vehicle with
the Intelligent Key, the vehicle will be locked
automatically by the walk-away lock func-
tion. This function is disabled by the default
setting. You can enable this function by the
vehicle information display. For additional
information, see “Vehicle Settings” (P. 2-32).

NOTE:

•

When the doors are locked by the walk
away lock function, the hazard indica-
tor flash twice. Be sure to confirm the
door locks before you leave the vehicle.

•

The walk-away lock function may not
operate under the following condi-
tions:

–

When the door(s) are not closed
securely.

–

When the engine is running.

–

When the Intelligent Key is placed in-
side of the vehicle.

–

When you place the Intelligent Key
outside of the vehicle for a period of
time. (When a door is opened and
closed, the walk-away lock function
will be activated.)

WARNING SIGNALS

To help prevent the vehicle from moving
unexpectedly by erroneous operation of
the Intelligent Key or to help prevent the
vehicle from being stolen, a chime or
buzzer sounds from inside and outside the
vehicle and a warning is displayed in the
instrument panel.

When a chime or beep sounds or a warning
is displayed, be sure to check the vehicle
and the Intelligent Key.

For additional information, see “Trouble-
shooting

guide

(Continuously

Variable

Transmission only)” (P. 3-18) and “Vehicle in-
formation display” (P. 2-25).

LPD3342

Pre-driving checks and adjustments

3-17

TROUBLESHOOTING GUIDE (Continuously Variable Transmission only)

Verify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent Key is in range or inside the vehicle, the
vehicle system may respond differently than expected.

Symptom

Possible Cause

Remedy

When stopping the engine

The Shift to Park warning appears on
the display and the inside warning
chime sounds continuously.

The shift lever is not in the P (Park)
position.

Move the shift lever to the P (Park)
position.

When opening the driver's door to get
out of the vehicle

The Door/Trunk Open warning ap-
pears on the display and the inside
warning chime sounds continuously.

The ignition switch is in the AUTO ACC
or ON position.

Place the ignition switch in the OFF
position.

When closing the door after getting
out of the vehicle

The No Key Detected warning appears
on the display, the outside chime
sounds three times and the inside
warning chime sounds for approxi-
mately 3 seconds.

The ignition switch is in the AUTO ACC
or ON position.

Place the ignition switch in the OFF
position.

The Rear Door Alert (if so equipped)
warning message appears on the
display, the horn sounds three times
twice, or a Check Back Seat For All
Articles (if so equipped) warning
appears on the display.

The Rear Door Alert is activated.

Check the back seat for all articles,
press the OK button to clear the Rear
Door Alert warning message.

The Shift to Park warning appears on
the display and the outside chime
sounds continuously.

The ignition switch is in the AUTO ACC
position and the shift lever is not in the
P (Park) position.

Move the shift lever to the P (Park)
position and place the ignition switch
in the OFF position.

When closing the door with the inside
lock knob turned to LOCK

The outside chime sounds for approxi-
mately 3 seconds and all the doors
unlock.

The Intelligent Key is inside the vehicle.

Carry the Intelligent Key with you.

3-18

Pre-driving checks and adjustments

Symptom

Possible Cause

Remedy

When pushing the door handle
request switch (if so equipped) or the

button on the Intelligent Key to

lock the door

The outside chime sounds for approxi-
mately 2 seconds.

The Intelligent Key is inside the vehicle.

Carry the Intelligent Key with you.

When pushing the ignition switch to
start the engine

The Key Battery Low indicator appears
on the display.

The battery charge is low.

Replace the battery with a new one.
For additional information, see “Battery
replacement” (P. 8-22).

The No Key Detected warning appears
on the display, the outside chime
sounds three times and the inside
warning chime sounds for approxi-
mately 3 seconds.

The Intelligent Key is not in the vehicle.

Carry the Intelligent Key with you.

When pushing the ignition switch

The I-Key System Error warning mes-
sage in the vehicle information display
appears.

It warns of a malfunction with the
Intelligent Key system.

It is recommended that you visit a
NISSAN dealer.

Pre-driving checks and adjustments

3-19

The

button will be on the NISSAN

Intelligent Key® if the vehicle has Remote
Engine Start. This feature allows the engine
to start from outside the vehicle.

The following features may be affected
when the Remote Engine Start feature is
used:
• Vehicles with a manual climate control

system (if so equipped) will default to the
last used heating or cooling mode.

• Vehicles with an automatic climate con-

trol system (if so equipped) may default
to either a heating or cooling mode de-
pending on outside and cabin tempera-
tures. For additional information, see
“Remote Engine Start with Intelligent Cli-
mate Control” (P. 4-24).

Laws in some local communities may re-
strict or prohibit the use of Remote Engine
Start, or the amount of time a parked ve-
hicle engine may idle. For example, some
laws require a person using Remote Engine
Start to have the vehicle in view or may
restrict idling time except in freezing tem-
peratures. Check local regulations for any
requirements.

Other conditions may affect the function of
the Remote Engine Start feature. For addi-
tional information, see “Conditions the
Remote Engine Start will not work” (P. 3-22).

Other conditions can affect the perfor-
mance of the Intelligent Key transmitter.
For additional information, see “NISSAN
Intelligent Key® system” (P. 3-7).

REMOTE ENGINE START
OPERATING RANGE

WARNING

•

To help avoid risk of injury or death
through unintended operation of the
vehicle and/or its systems, including
entrapment in windows or inadver-
tent door lock activation, do not
leave children, people who require
the assistance of others or pets unat-
tended in your vehicle. Additionally,
the temperature inside a closed ve-
hicle on a warm day can quickly be-
come high enough to cause a signifi-
cant risk of injury or death to people
and pets.

•

Do not use Remote Engine Start in
closed spaces such as a garage. Do
not breathe exhaust gases; they con-
tain colorless and odorless carbon
monoxide. Carbon monoxide is dan-
gerous. It can cause unconscious-
ness or death.

LPD2995

REMOTE ENGINE START (if so
equipped)

3-20

Pre-driving checks and adjustments

CAUTION

When the Intelligent Key battery is dis-
charged or other strong radio wave
sources are present near the operating
location, the Intelligent Key operating
range becomes narrower, and the Intel-
ligent Key may not function properly.

The Remote Engine Start function can only
be used when the Intelligent Key is within
the specified operating range from the
vehicle.

The Remote Engine Start operating range is
approximately 197 ft (60 m) from the vehicle.

REMOTE STARTING THE VEHICLE

To use the Remote Engine Start feature to
start the engine perform the following:

1. Aim the Intelligent Key at the vehicle.

2. Press the

button to lock all doors.

3. Within 5 seconds press and hold the

button until the turn signal lights

flash and the tail lamps turn on. If the
vehicle is not within view press and hold
the

button for at least 2 seconds.

The following events will occur when the
engine starts:
• The parking lights will turn on and remain

on as long as the engine is running.

• The doors will be locked and the climate

control system may come on.

• The engine will continue to run for 10 min-

utes. Repeat the steps to extend the time
for an additional 10 minutes. For addi-
tional information, see “Extending engine
run time” (P. 3-21).

Press and hold the brake then push the
push-button ignition switch to the ON po-
sition before driving. For additional infor-
mation, see “Driving the vehicle” (P. 5-18).

EXTENDING ENGINE RUN TIME

The Remote Engine Start feature can be
extended one time by performing the
steps listed in “Remote starting the vehicle”
in this section. Run time will be calculated
as follows:
• The first 10 minute run time will start

when the Remote Engine Start function is
performed.

• The second 10 minutes will start immedi-

ately when the Remote Engine Start
function is performed again. For example,

if the engine has been running for 5 min-
utes, and 10 minutes are added, the en-
gine will run for a total of 15 minutes.

• Extending engine run time will bring you

to the two Remote Engine Start limit.

A maximum of two Remote Engine Starts,
or a single Remote Engine Start with an
extension, are allowed between ignition
cycles. The ignition switch must be cycled
to the ON position and then back to the
OFF position before the Remote Engine
Start procedure can be used again.

CANCELING A REMOTE ENGINE
START

To cancel a Remote Engine Start, perform
one of the following:
• Aim the Intelligent Key at the vehicle and

press

until the parking lights turn off.

• Turn on the hazard warning flashers.
• Cycle the ignition switch on and then off.
• The extended engine run time has expired.
• The first 10 minute timer has expired.
• Opening the engine hood.
• Shifting the vehicle out of P (Park).
• The alarm sounds due to illegal entry into

the vehicle.

Pre-driving checks and adjustments

3-21

• Pushing the ignition switch without the

Intelligent Key in the vehicle.

• Not pressing the brake pedal while push-

ing the ignition switch with the Intelligent
Key in the vehicle.

CONDITIONS THE REMOTE ENGINE
START WILL NOT WORK

The Remote Engine Start will not operate if
any of the following conditions are present:
• The ignition switch is placed in the ON

position.

• The hood is not securely closed.
• The hazard indicator lights are on.
• The engine is still running. The engine

must be completely stopped. Wait at
least 6 seconds if the engine goes from
running to off. This is not applicable when
extending engine run time.

• The

button is not pressed and held

for at least 2 seconds.

• The

button is not pressed and held

within 5 seconds of pressing the lock
button.

• The brake is pressed.
• The doors are not closed and locked.
• The trunk is open.

• The I-Key System Error warning shows in

the vehicle information display.

• The alarm sounds due to illegal entry into

the vehicle.

• Two Remote Engine Starts, or a single

Remote Engine Start with an extension,
have already been used.

• The vehicle is not in P (Park).
• There is a detected registered key already

inside of the vehicle.

• The Remote Engine Start function has

been switched to the OFF position in
“Vehicle Settings” of the vehicle informa-
tion display. For additional information,
see “Vehicle information display” (P. 2-25).

The Remote Engine Start may display a
warning or indicator in the vehicle informa-
tion display. For additional information, see
“Vehicle information display” (P. 2-25).

3-22

Pre-driving checks and adjustments

1. Pull the hood lock release handle

lo-

cated below the driver’s side instrument
panel until the hood springs up slightly.

2. Locate the lever

under the hood and

push the lever sideways with your
fingertips.

3. Raise the hood

4. Remove the support rod and insert it

into the slot

Hold the coated parts when removing or
resetting the support rod. Avoid direct
contact with the metal parts, as they
may be hot immediately after the engine
has been stopped.

When closing the hood, return the support
rod to its original position, lower the hood
to approximately 12 in (30 cm) above the
latch and release it. This allows proper en-
gagement of the hood latch.

WARNING

•

Make sure the hood is completely
closed and latched before driving.
Failure to do so could cause the hood
to fly open and result in an accident.

•

If you see steam or smoke coming
from the engine compartment, to
avoid injury do not open the hood.

LPD3042

HOOD

Pre-driving checks and adjustments

3-23

WARNING

•

Do not drive with the trunk lid open.
This could allow dangerous exhaust
gases to be drawn into the vehicle. For
additional information, see “Exhaust
gas (carbon monoxide)” (P. 5-4).

•

Closely supervise children when they
are around cars to prevent them
from playing and becoming locked in
the trunk where they could be seri-
ously injured. Keep the car locked,
with the rear seatback and trunk lid
securely latched when not in use, and
prevent children's access to car keys.

KEY OPERATION (if so equipped)

To open the trunk lid, turn the key clock-
wise. To close the trunk lid, lower and push
the trunk lid down securely.

OPENER OPERATION

WARNING

•

Do not drive with the trunk lid open.
This could allow dangerous exhaust
gases to be drawn into the vehicle.
For additional information, see “Ex-
haust gas (carbon monoxide)” (P. 5-4).

LPD3067

LPD2215

TRUNK LID

3-24

Pre-driving checks and adjustments

•

The trunk lid release is located on the floor
to the left of the driver’s seat.

To open the trunk lid, pull the opener lever
up.

To close the trunk lid, lower and push the
trunk lid down securely.

INTERIOR TRUNK LID RELEASE

WARNING

Closely supervise children when they
are around cars to prevent them from
playing and becoming locked in the
trunk where they could be seriously in-
jured. Keep the car locked, with the rear
seatback and trunk lid securely latched
when not in use, and prevent children's
access to car keys.

The interior trunk lid release mechanism
provides a means of escape for children
and adults in the event they become
locked inside the trunk.

To open the trunk from the inside, pull the
illuminated release handle until the lock re-
leases and push up on the trunk lid. The
release handle is made of a material that
glows in the dark after a brief exposure to
ambient light.

The handle is located inside the trunk com-
partment on the trunk lock at the center of
the trunk lid.

INTERIOR TRUNK ACCESS (if so
equipped)

The trunk can be accessed from the driv-
er’s side or the passenger side of the rear
seat.

1. Move the front seat to the most forward

position.

2. Pull up on the knob on the rear seatback.

3. Fold down the driver’s or passenger’s

side seatback.

For additional information, see “Seats” (P. 1-2).

LPD3044

Pre-driving checks and adjustments

3-25

WARNING

•

Never allow anyone to ride in the
cargo area or on the rear seat when it
is in the fold-down position. Use of
these areas by passengers without
proper restraints could result in seri-
ous injury or death in an accident or
sudden stop.

•

Properly secure all cargo with ropes
or straps to help prevent it from slid-
ing or shifting. Do not place cargo
higher than the seatbacks. In a
sudden stop or collision, unsecured
cargo could cause personal injury.

•

When returning the seatbacks to the
upright position, be certain they are
completely secured in the latched
position. If they are not completely
secured, passengers may be injured
in an accident or sudden stop.

•

OPENER OPERATION

The fuel-filler door release is located below
the instrument panel. To open the fuel-filler
door, pull the release. To lock, close the fuel-
filler door securely.

FUEL-FILLER CAP

WARNING

•

Gasoline is extremely flammable and
highly explosive under certain condi-
tions. You could be burned or seriously
injured if it is misused or mishandled.
Always stop the engine and do not
smoke or allow open flames or sparks
near the vehicle when refueling.

LPD3038

LPD3037

FUEL-FILLER DOOR

3-26

Pre-driving checks and adjustments

•

Do not attempt to top off the fuel tank
after the fuel pump nozzle shuts off
automatically.

Continued

refueling

may cause fuel overflow, resulting in
fuel spray and possibly a fire.

•

Use only an original equipment type
fuel-filler cap as a replacement. It has
a built-in safety valve needed for
proper operation of the fuel system
and emission control system. An in-
correct cap can result in a serious
malfunction and possible injury. It
could also cause the

Malfunc-

tion Indicator Light (MIL) to come on.

•

Never pour fuel into the throttle body
to attempt to start your vehicle.

•

Do not fill a portable fuel container in
the vehicle or trailer. Static electricity
can cause an explosion of flammable
liquid, vapor or gas in any vehicle or
trailer. To reduce the risk of serious
injury or death when filling portable
fuel containers:

–

Always place the container on the

ground when filling.

–

Do not use electronic devices when

filling.

–

Keep the pump nozzle in contact

with the container while you are
filling it.

–

Use only approved portable fuel

containers for flammable liquid.

CAUTION

•

Do not use E-15 or E-85 fuel in your
vehicle. For additional information,
see “Fuel recommendation” (P. 10-4).

•

The Loose Fuel Cap warning will ap-
pear if the fuel-filler cap is not prop-
erly tightened. It may take a few driv-
ing trips for the message to be
displayed. Failure to tighten the fuel-
filler cap properly after the Loose
Fuel Cap warning appears may cause
the

Malfunction Indicator Light

(MIL) to illuminate.

•

Failure to tighten the fuel-filler cap
properly may cause the

Mal-

function Indicator Light (MIL) to illu-
minate. If the

light illuminates

because the fuel-filler cap is loose or
missing, tighten or install the cap
and continue to drive the vehicle. The

light should turn off after a few

driving trips. If the

light does not

turn off after a few driving trips, have
the vehicle inspected. It is recom-
mended that you visit a NISSAN
dealer for this service.

•

For additional information, see “Mal-
function Indicator Light (MIL)” (P. 2-20).

•

If fuel is spilled on the vehicle body,
flush it away with water to avoid paint
damage.

Pre-driving checks and adjustments

3-27

To remove the fuel-filler cap:

1. Turn the fuel-filler cap counterclockwise

to remove.

2. Put the fuel-filler cap on the cap holder

while refueling.

To install the fuel-filler cap:

1. Insert the fuel-filler cap straight into the

fuel-filler tube.

2. Turn the fuel-filler cap clockwise until a

single click is heard.

LOOSE FUEL CAP warning
message (if so equipped)

The LOOSE FUEL CAP warning message
displays in the trip computer when the
fuel-filler cap is not tightened correctly af-
ter the vehicle has been refueled. It may
take a few driving trips for the message to
be displayed. To turn off the warning mes-
sage, perform the following:

1. Remove and install the fuel-filler cap as

previously described as soon as possible.

2. Tighten the fuel-filler cap until it clicks.

3. Press the reset button

for more than

1 second to reset the LOOSE FUEL CAP
warning message after the fuel cap has
been tightened.

LPD3051

LIC4233

3-28

Pre-driving checks and adjustments

WARNING

•

Do not adjust the steering wheel while
driving. You could lose control of your
vehicle and cause an accident.

•

Do not adjust the steering wheel any
closer to you than is necessary for
proper steering operation and com-
fort. The driver's air bag inflates with
great force. If you are unrestrained,
leaning forward, sitting sideways or
out of position in any way, you are at
greater risk of injury or death in a
crash. You may also receive serious
or fatal injuries from the air bag if you
are up against it when it inflates. Al-
ways sit back against the seatback
and as far away as practical from the
steering wheel. Always use the seat
belts.

TILT AND TELESCOPIC OPERATION

Push the lock lever

down:

• Adjust the steering wheel up or down in

direction

to the desired position.

• Adjust the steering wheel forward or

backward in direction

to the desired

position.

Pull the lock lever

up firmly to lock the

steering wheel in place.

1. To block glare from the front, swing

down the sun visor

2. To block glare from the side, remove the

sun visor from the center mount and
swing the visor to the side

3. Slide the sun visor extension

in or out

as needed.

LPD3045

WPD0315

STEERING WHEEL

SUN VISORS

Pre-driving checks and adjustments

3-29

CAUTION

•

Do not store the sun visor before re-
turning the extension to its original
position.

•

Do not pull the extension sun visor
forcedly downward.

VANITY MIRROR

To access the vanity mirror, pull the sun
visor down and flip open the mirror cover.

CARD HOLDER (driver's side only)

To access the card holder, pull the sun visor
down and slide card in the card holder

Do not view information while operating
the vehicle.

SPA1733

LPD2471

3-30

Pre-driving checks and adjustments

REARVIEW MIRROR

The night position

reduces glare from

the headlights of vehicles behind you at
night.

Use the day position

when driving in

daylight hours.

WARNING

Use the night position only when nec-
essary, because it reduces rear view
clarity.

OUTSIDE MIRRORS

To operate the outside mirror remote con-
trol move the small switch

to select the

right or left mirror. Adjust each mirror to the
desired position using the large switch

Move the small switch to the center (neu-
tral) position to prevent accidentally mov-
ing the mirror.

WARNING

•

Do not adjust the mirrors while driv-
ing. You could lose control of your ve-
hicle and cause an accident.

•

Objects viewed in the outside mirror
on the passenger side are closer than
they appear. Be careful when moving
to the right. Using only this mirror
could cause an accident. Use the
inside mirror or glance over your
shoulder to properly judge distances
to other objects.

WPD0126

LPD2452

MIRRORS

Pre-driving checks and adjustments

3-31

Refer to the digital NissanConnect® Owner’s
manual using the QR code on this page,
or your printed NissanConnect® Owner’s
manual (if so equipped). This manual in-
cludes the following information:
• NissanConnect® Services (if so equipped)
• Audio system
• Apple CarPlay®
• Android Auto™
• Bluetooth® Hands-Free Phone system
• Viewing information
• Other settings
• Voice recognition (if so equipped)
• General system information

WARNING

•

Positioning of the heating or air con-
ditioning controls and display con-
trols should not be done while driv-
ing in order that full attention may be
given to the driving operation.

•

Do not disassemble or modify this
system. If you do, it may result in ac-
cidents, fire, or electrical shock.

•

Do not use this system if you notice
any abnormality, such as a frozen
screen or lack of sound. Continued
use of the system may result in acci-
dent, fire or electric shock.

•

In case you notice any foreign object in
the system hardware, spill liquid on it,
or notice smoke or smell coming from
it, stop using the system immediately.
Ignoring such conditions may lead to
accidents, fire or electrical shock. It is
recommended that you visit a NISSAN
dealer for servicing.

LHA6509

NISSANCONNECT® OWNER’S
MANUAL (if so equipped)

4-2

Monitor, climate, audio, phone and voice recognition systems

MENU button

2. Display screen

3. DISP button

BACK button

5. TUNE•SCROLL knob / PUSH SOUND

button

6. VOL (volume) knob / PUSH

(power)

button

(brightness control) button

button*

* For additional information, see “Bluetooth®
Hands-Free Phone System” (P. 4-49) regard-
ing the Bluetooth® Hands-Free Phone Sys-
tem control button.

When you use this system, make sure the
engine is running.

If you use the system with the engine not
running for a long time, it will discharge
the battery, and the engine will not start.

Reference symbols:

“Example” — Words marked in quotes refer to
a key shown only on the display. These keys
can be selected by touching the screen.

LHA4703

CONTROL PANEL BUTTONS (if so
equipped)

Monitor, climate, audio, phone and voice recognition systems

4-3

HOW TO USE THE TOUCH-SCREEN

CAUTION

•

The glass display screen may break if
it is hit with a hard or sharp object. If
the glass screen breaks, do not touch
it. Doing so could result in an injury.

•

To clean the display, never use a
rough cloth, alcohol, benzine, thinner
or any kind of solvent or paper towel
with a chemical cleaning agent. They
will scratch or deteriorate the panel.

•

Do not splash any liquid such as wa-
ter or car fragrance on the display.
Contact with liquid will cause the sys-
tem to malfunction.

To help ensure safe driving, some functions
cannot be operated while driving.

The on-screen functions that are not avail-
able while driving will be “grayed out” or
muted.

WARNING

•

ALWAYS give your full attention to
driving.

•

Avoid using vehicle features that
could distract you. If distracted, you
could lose control of your vehicle and
cause an accident.

Touch-screen operation

Menu Item

Result

Selecting the item

Touch an item to select. To select the “Phone” key, touch the “Phone” key on the screen. Touch the “

” key to

return to the previous screen.

Adjusting the item

Touch the “+” key or the “−” key to adjust the settings of an item. Touch the up arrow to scroll up the page one
item at a time. Touch the down arrow to scroll down the page one item at a time.

Inputting characters

Touch the number key. There are some options available when inputting characters.

123

Touch to manually enter numbers.

Completes the character input.

LHA4700

4-4

Monitor, climate, audio, phone and voice recognition systems

Touch-screen maintenance

If you clean the display screen, use a dry,
soft cloth. If additional cleaning is neces-
sary, use a small amount of neutral deter-
gent with a soft cloth. Never spray the
screen with water or detergent. Dampen
the cloth first and then wipe the screen.

HOW TO USE THE

BUTTON

To select and/or adjust several functions,
features and modes that are available for
your vehicle:

1. Press the

MENU button.

2. Touch the “Settings” key.

3. Touch the desired item.

LHA4706

LHA4700

Monitor, climate, audio, phone and voice recognition systems

4-5

Menu item

Result

Settings

Touch to change the following settings.

Connections

Touch this key to select either Bluetooth® phone, Bluetooth® audio or USB audio options. For additional information,
see “USB connections screen” (P. 4-36) and “Bluetooth® connections screen” (P. 4-62).

Phone

For additional information, see “Bluetooth® Hands-Free Phone System” (P. 4-49).

Sound

For additional information, see “Audio system” (P. 4-26).

Volume & Beeps

For additional information, see “Volume & beeps” (P. 4-65).

Clock

Touch this key to adjust clock settings.

On-screen Clock

Touch to toggle ON or OFF the clock display on the upper right corner of the display screen.

Clock Format

Touch to set the clock to 12–hour or 24–hour format.

Daylight Savings
Time

Touch to adjust the daylight savings time to on or off.

Set Clock Manually

Touch to adjust the clock manually; then touch to change between AM and PM, the hour and the minutes.

System Voice

For additional information, see “Settings” (P. 4-57).

Camera

Touch this key to change the camera settings.

Others

Touch this key to select and/or adjust various functions of this system. A screen with additional options will appear.

Display

Touch this key to toggle the display off or to adjust the appearance of the display. For additional information, see
“Adjusting the screen” (P. 4-13).

Language

Touch this key to change the language on the display.

OSS Licenses

Touch this key to display software licensing information.

Return All Settings
To Default

Touch this key to return all settings to default and to clear the memory.

4-6

Monitor, climate, audio, phone and voice recognition systems

(brightness control) BUTTON

To change the display brightness, press the

button. Pressing the button again will

change the display to the day or the night
display.

Press and hold the

button for more

than 2 seconds to turn the display off. Press
the button again to turn the display on.

HOW TO USE THE VOL (volume)
KNOB / PUSH

(power)

BUTTON

Press the PUSH

(power) button to turn

audio function on and off. Turn the VOL
(volume) knob to adjust audio volume.

SELECTING MENU FROM LAUNCH
BAR

Various system functions can be accessed
by touching the items on the Launch Bar

which is displayed on most of the main

menu screens (the Launch Bar does not
appear on some screens such as keyboard
screens, camera screens, etc.)

Touch the keys on the Launch Bar to dis-
play the corresponding menu screens.

The following menu items are available on
the Launch Bar:
• AM
• FM
• USB/iPod
• Bluetooth
• AUX
• Settings

LHA4707

Monitor, climate, audio, phone and voice recognition systems

4-7

WARNING

•

Failure to follow the warnings and in-
structions for proper use of the Rear-
View Monitor system could result in
serious injury or death.

•

RearView Monitor is a convenience
feature and is not a substitute for
proper backing. Always turn and look
out the windows and check mirrors
to be sure that it is safe to move be-
fore operating the vehicle. Always
back up slowly.

•

The system is designed as an aid to
the driver in showing large station-
ary objects directly behind the ve-
hicle, to help avoid damaging the
vehicle.

•

The distance guide lines and the ve-
hicle width lines should be used as a
reference only when the vehicle is on
a level paved surface. The distance
viewed on the monitor is for refer-
ence only and may be different than
the actual distance between the ve-
hicle and displayed objects.

CAUTION

Do not scratch the camera lens when
cleaning dirt or snow from the front of
the camera.

The RearView Monitor system automati-
cally shows a rear view of the vehicle when
the shift lever is shifted into the R (Reverse)
position. The radio can still be heard while
the RearView Monitor is active.

To display the rear view, the RearView Moni-
tor system uses a camera located just
above the vehicle’s license plate

REARVIEW MONITOR SYSTEM
OPERATION

With the ignition switch in the ON position,
move the shift lever to the R (Reverse) po-
sition to operate the RearView Monitor.

LHA5234

Monitor, climate, audio, phone and voice recognition systems

4-9

HOW TO READ THE DISPLAYED
LINES

Guiding lines which indicate the vehicle
width and distances to objects with refer-
ence to the vehicle body line

are dis-

played on the monitor.

Distance guide lines

Indicate distances from the vehicle body.
• Red line

: approx. 1.5 ft (0.5 m)

• Yellow line

: approx. 3 ft (1 m)

• Green line

: approx. 7 ft (2 m)

Vehicle width guide lines

Indicate the vehicle width when backing up.

Predicted course lines (if so equipped)

Indicate the predicted course when back-
ing up. The predicted course lines will be
displayed on the monitor when the shift
lever is in the R (Reverse) position and the
steering wheel is turned. The predicted
course lines will move depending on how
much the steering wheel is turned and will
not be displayed while the steering wheel is
in the straight-ahead position.

The vehicle width guide lines and the width
of the predicted course lines are wider than
the actual width and course.

DIFFERENCE BETWEEN PREDICTED
AND ACTUAL DISTANCES

The displayed guidelines and their loca-
tions on the ground are for approximate
reference only. Objects on uphill or downhill
surfaces or projecting objects will be actu-
ally located at distances different from
those displayed in the monitor relative to
the guidelines (refer to illustrations). When
in doubt, turn around and view the objects
as you are backing up, or park and exit the
vehicle to view the positioning of objects
behind the vehicle.

Backing up on a steep uphill

When backing up the vehicle up a hill, the
distance guide lines and the vehicle width
guide lines are shown closer than the actual
distance. Note that any object on the hill is
further than it appears on the monitor.

LHA4805

LHA5283

4-10

Monitor, climate, audio, phone and voice recognition systems

Backing up on a steep downhill

When backing up the vehicle down a hill,
the distance guide lines and the vehicle
width guide lines are shown farther than
the actual distance. Note that any object
on the hill is closer than it appears on the
monitor.

Backing up near a projecting
object

The predicted course lines

(if so

equipped) do not touch the object in the
display. However, the vehicle may hit the
object if it projects over the actual backing
up course.

Backing up behind a projecting
object

The position

is shown farther than the

position

in the display. However, the po-

sition

is actually at the same distance

as the position

. The vehicle may hit the

LHA5284

LHA4995

LHA5285

Monitor, climate, audio, phone and voice recognition systems

4-11

Nissan Versa (2024 year). Manual in english - page 6