Nissan Versa (2024 year). Manual in english

Fast-forwarding/rewinding

To fast-forward or rewind the track, press
and hold the

buttons on the

control panel or touch the “

” or “

”

keys on the screen.

Changing play mode
Repeat mode

Touch the “

” key on the screen to

change the repeat mode.

Random mode

Touch the “

” key on the screen to

change the random mode.

NOTE:

Available repeat/random modes change
depending on the connected device.

BT Menu

Touch the “BT Menu” key on the Bluetooth®
audio screen to display the Bluetooth® au-
dio menu screen.

The following items are available.

“Now Playing” key

Touch to display the
Bluetooth® audio screen.

“Current List” key
(if so equipped)*

A list of tracks in the cur-
rently selected folder is
displayed.

“Connections” key

Touch to display the
connections screen.

“Folder List” key*

Touch to display the
folder list. Touch an item
on the list to select the
folder.

*: displayed only when available.

NOTE:

Depending on the connected device, the
“BT Menu” key may not be displayed.

STEERING WHEEL SWITCH FOR
AUDIO CONTROL

SEEK/TRACK buttons

2. SOURCE switch

3. Volume control switch

SOURCE switch

Push the SOURCE switch to change the
mode in the following sequence:

→

USB/iPod®*

→

Bluetooth® Au-

dio*

→

AUX*

→

AM.

* These modes are only available when
compatible media storage is inserted into
the device or connected to the system.

LHA4227

4-44

Monitor, climate, audio, phone and voice recognition systems

SEEK/TRACK buttons

AM and FM

• Press or hold for less than 1.5 seconds to

increase or decrease the preset station
and show a list of the preset stations.

• Press or hold for more than 1.5 seconds to

seek up or down to the next station.

iPod®

• Press or hold for less than 1.5 seconds to

increase or decrease the track number.

• Press or hold for more than 1.5 seconds to

reverse or fast forward the track being
played.

Bluetooth® Streaming Audio

• Press or hold for less than 1.5 seconds to

skip ahead or back to the next song.

USB

• Press or hold for less than 1.5 seconds to

increase or decrease the track number.

• Press or hold for more than 1.5 seconds to

reverse or fast forward the track being
played.

Volume control switch

Push the volume control switch to increase
or decrease the volume.

The rod antenna cannot be shortened, but
can be removed. When you need to remove
the antenna, turn the antenna rod counter-
clockwise

To install the antenna rod, turn the antenna
rod clockwise

and hand tighten.

CAUTION

To avoid damaging or deforming the
antenna, be sure to remove the an-
tenna under the following conditions.

•

The vehicle enters an automatic car
wash.

•

The vehicle enters a garage with a
low ceiling.

•

The vehicle is covered with a car
cover.

•

Always properly tighten the antenna
rod during installation or the an-
tenna rod may break during vehicle
operation.

LHA4236

ANTENNA (Type A) (if so equipped)

Monitor, climate, audio, phone and voice recognition systems

4-45

ROOF MOUNTED ANTENNA

The antenna is located on the rear part of
the vehicle roof.

CAUTION

•

A build-up of ice on the antenna can
affect radio performance. Remove
the ice to restore radio reception.

•

When removing snow from the roof,
do not apply strong force to the
antenna. That may cause broken an-
tenna and roof panel dent.

•

When using a high pressure car wash,
keep the high pressure nozzle away
from the antenna. The seal may be
deformed or damaged.

•

The radio performance may be af-
fected if cargo carried on the roof
blocks the radio signal. If possible, do
not put cargo near the antenna.

Apple Siri® Eyes Free personal assistant
can be accessed from the vehicle. Siri Eyes
Free can be accessed in Siri Eyes Free
mode to reduce user distraction. In this
mode, Siri Eyes Free is available for inter-
action by voice control. After connecting
a

compatible

Apple

device

using

Bluetooth®, Siri Eyes Free can be activated
from the

button on the steering

wheel.

Siri® is a trademark of Apple Inc., registered
in the U.S. and other countries.
• Some Siri Eyes Free functions, such as

displaying pictures or opening apps, may
not be available while driving.

• For getting best results, always update

your device to the latest software version.

• Keep the interior of the vehicle as quiet as

possible. Close the windows to eliminate
the surrounding noises (traffic noises, vi-
bration sounds, etc.), which may prevent
the system from recognizing the voice
commands correctly.

• For functions that can be used in Siri Eyes

Free, please refer to the Apple website.

REQUIREMENTS

Siri® is only available on the iPhone® 4S or
later. Devices released before iPhone® 4S
are not supported by the Siri® Eyes Free
system. Visit www.apple.com/ios/siri for
details about device compatibility.

Siri must be enabled on the phone. Please
check phone settings.

If the device has a lock screen, Siri must be
accessible from the lock screen. Please
check phone settings.

For best results, always update your device
to the latest software version.

ANTENNA (Type B) (if so equipped)

SIRI® EYES FREE

4-46

Monitor, climate, audio, phone and voice recognition systems

OPERATING SIRI® EYES FREE

1. Press

button for less than 1.5 sec-

onds.

2. Speak your command and then listen to

the Siri® Eyes Free reply.

After starting Siri Eyes Free, press the
button again within 5 seconds of the end of
the Siri Eyes Free announcement to extend
the session.

Example 1 – Playing music

1. Press

button for less than 1.5

seconds.

2. Say “Play (artist name, song name, etc.)”.

3. Your vehicle will automatically change to

Bluetooth® Audio or iPod® mode* when
the music starts playing. Mode selection
is determined by the phone.

* If the iPhone® is also connected with the
USB cable.

If the audio track does not start playing
automatically after Siri Eyes Free ends, try
changing the track or audio source to re-
sume playback.

NOTE:

For best results, use the native music
app. Performance of music control func-
tion while using Podcasts, Audiobook or
other 3rd party music apps may vary and
is controlled by the iPhone®.

Example 2 – Replying to text messages

1. If a compatible iPhone® is connected

and “Show Notifications” of the iPhone®
settings is enabled, the vehicle will dis-
play a notification for new incoming text
messages.

2. After reading the message, press or

press and hold the

button to reply

using Siri Eyes Free.

3. After a beep sounds, say “Text message”

or a similar command to reply using Siri
Eyes Free.

LHA4733

Monitor, climate, audio, phone and voice recognition systems

4-47

TROUBLESHOOTING GUIDE

Symptom

Cause and Countermeasure

Cannot access Siri Eyes Free
from switch on the steering
wheel

Check if a Bluetooth® connection is established between the iPhone® and the system.

Check if Siri is enabled on the device. On your phone, go to Siri setting.

Check that Siri can be accessed from the device lock screen. This can be set in the settings menu of your phone.

Audio Source does not change
automatically to iPod® or
Bluetooth® Audio mode

For best results, use the native Music app. Performance of music control function while using Podcasts, Audiobook or other
3rd party music apps may vary.

For best results, play media already stored on your device. Streaming music or playback from cloud storage may degrade per-
formance.

Switch the source manually by pressing the AUX or MEDIA button on the vehicle audio system or the SOURCE select switch on
the steering wheel.

Play, pause, next track, previous
track or play timer does not
work

For best results, use the native Music app. Performance of music control function while using Podcasts, Audiobook or other
3rd party music apps may vary and is controlled by the device.

Cannot hear any music/audio
being played back from a con-
nected iPhone®

Check that the audio source is set to Bluetooth® Audio or iPod® mode. A USB connection is required for iPod® mode.

Cannot receive text message
notifications on the vehicle
audio system

Check if “Send Notifications” is enabled on your phone. On the phone, go to Bluetooth® settings. Find the device name, like
“My Car”. Press the INFO button. Turn on “Show Notifications”.

Cannot reply to text message
notifications by Siri Eyes Free

After receiving an incoming text message, follow on-screen guidance. Press the

button for 1.5 seconds on the steering

wheel for Siri Eyes Free. After Siri Eyes Free starts, say “Text Message”.

4-48

Monitor, climate, audio, phone and voice recognition systems

When installing a CB, ham radio or car
phone in your vehicle, be sure to observe
the following precautions; otherwise, the
new equipment may adversely affect the
engine control system and other electronic
parts.

WARNING

•

A cellular phone should not be used
for any purpose while driving so full
attention may be given to vehicle
operation. Some jurisdictions pro-
hibit the use of cellular phones while
driving.

•

If you must make a call while your
vehicle is in motion, the hands free
cellular

phone

operational

mode

(if so equipped) is highly recom-
mended. Exercise extreme caution at
all times so full attention may be
given to vehicle operation.

•

If you are unable to devote full atten-
tion to vehicle operation while talk-
ing on the phone, pull off the road to
a safe location and stop your vehicle.

CAUTION

•

Keep the antenna as far away as
possible from the electronic control
modules.

•

Keep the antenna wire more than 8 in
(20 cm) away from the electronic
control system harnesses. Do not
route the antenna wire next to any
harness.

•

Adjust the antenna standing-wave
ratio as recommended by the manu-
facturer.

•

Connect the ground wire from the CB
radio chassis to the body.

•

For additional information, it is rec-
ommended that you visit a NISSAN
dealer for this service.

WARNING

•

Use a phone after stopping your ve-
hicle in a safe location. If you have to
use a phone while driving, exercise
extreme caution at all times so full
attention may be given to vehicle
operation.

•

If you are unable to devote full atten-
tion to vehicle operation while talk-
ing on the phone, pull off the road to
a safe location and stop your vehicle.

CAUTION

To avoid discharging the vehicle bat-
tery, use a phone after starting the
engine.

CAR PHONE OR CB RADIO

BLUETOOTH® HANDS-FREE PHONE
SYSTEM

Monitor, climate, audio, phone and voice recognition systems

4-49

Your

NISSAN

equipped

with

the

Bluetooth® Hands-Free Phone System. If
you have a compatible Bluetooth® enabled
cellular phone, you can set up the wireless
connection between your cellular phone

and the in-vehicle phone module. With
Bluetooth® wireless technology, you can
make or receive a hands-free telephone
call with your cellular phone in the vehicle.

Once your cellular phone is connected to
the in-vehicle phone module, no other
phone connecting procedure is required.
Your phone is automatically connected
with the in-vehicle phone module when
the ignition switch is placed in the AUTO
ACC or ON position with the previously con-
nected cellular phone turned on and car-
ried in the vehicle.

NOTE:

Some devices require the user to accept
connections to other Bluetooth® de-
vices. If your phone does not connect au-
tomatically to the system, consult the
phone's owner's manual for details on
device operation.

You can connect up to six different
Bluetooth® cellular phones to the in-
vehicle phone module. However, you can
talk on only one cellular phone at a time.

Before using the Bluetooth® Hands-Free
Phone System, refer to the following notes.
• Set up the wireless connection between

a compatible cellular phone and the in-
vehicle phone module before using the
hands-free phone system.

LHA5307

4-50

Monitor, climate, audio, phone and voice recognition systems

• Some Bluetooth® enabled cellular phones

may not be recognized or work properly.
Please visit www.nissanusa.com/bluetooth
or www.nissan.ca/bluetooth for a recom-
mended phone list and connecting in-
structions.

• You will not be able to use a hands-free

phone under the following conditions:

Your vehicle is outside of the cellular ser-
vice area.
Your vehicle is in an area where it is difficult
to receive a cellular signal; such as in a
tunnel, in an underground parking garage,
near a tall building or in a mountainous
area.
Your cellular phone is locked to prevent it
from being dialed.
• When the radio wave condition is not

ideal or ambient sound is too loud, it may
be difficult to hear the other person's
voice during a call.

• Do not place the cellular phone in an area

surrounded by metal or far away from
the in-vehicle phone module to prevent
tone quality degradation and wireless
connection disruption.

• While a cellular phone is connected

through the Bluetooth® wireless connec-
tion, the battery power of the cellular
phone may discharge quicker than usual.
The Bluetooth® Hands-Free Phone Sys-
tem cannot charge cellular phones.

• Some cellular phones or other devices

may cause interference or a buzzing
noise to come from the audio system
speakers. Storing the device in a different
location may reduce or eliminate the
noise.

• For additional information, refer to the

cellular phone owner's manual regarding
the telephone charges, cellular phone
antenna and body, etc.

REGULATORY INFORMATION

FCC Notice:

For USA:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device
may not cause harmful interference, and
(2) this device must accept any inter-
ference received, including interference
that may cause undesired operation.

NOTE:

Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's author-
ity to operate the equipment.

For Canada:

This

device

contains

licence-exempt

transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic
Development Canada’s licence-exempt
RSS(s). Operation is subject to the fol-
lowing two conditions: (1) This device
may not cause interference. (2) This de-
vice must accept any interference, in-
cluding interference that may cause un-
desired operation of the device.

BLUETOOTH® is a
trademark owned
by Bluetooth SIG, Inc.
and licensed to
Panasonic.

Monitor, climate, audio, phone and voice recognition systems

4-51

USING THE SYSTEM

The system allows hands-free operation of
the Bluetooth® Hands-Free Phone System.

If the vehicle is in motion, some commands
may not be available so full attention may
be given to vehicle operation.

Initialization

When the ignition switch is placed in the ON
position, NISSAN Voice Recognition is initial-
ized, which takes a few seconds. If the
button is pressed before the initialization
completes, the system will announce
“There is no phone connected” and will not
react to voice commands.

Operating tips

To get the best performance out of the
NISSAN Voice Recognition System, observe
the following:
• Keep the interior of the vehicle as quiet as

possible. Keep all vents pointed away
from the microphone and close the win-
dows to eliminate surrounding noises
(traffic noises, vibration sounds, etc.),
which may prevent the system from rec-
ognizing voice commands correctly.

• Wait until the tone sounds before speak-

ing a command. Otherwise, the com-
mand will not be received properly.

• Start speaking a command within 5 sec-

onds after the tone sounds.

• Speak in a natural voice without pausing

between words.

• For calling contacts by name, please say

both the first and last name of the con-
tact for better recognition.

Giving voice commands

To operate NISSAN Voice Recognition,
press the

button located on the steer-

ing wheel for less than 1.5 seconds. After
the tone sounds, speak a command.

The command given is picked up by the
microphone, and voice feedback is given
when the command is accepted.
• If a command is not recognized, the sys-

tem announces, “Please say or select a
command from the displayed list.” Make
sure the command is said exactly as
prompted by the system and repeat the
command in a clear voice.

• If you want to go back to the previous

command, you can say “Go back” or “Cor-
rection” any time the system is waiting for
a response.

• You can cancel a command when the

system is waiting for a response by say-
ing, “Cancel” or “Quit.” The system an-
nounces “Exit” and ends the Voice Recog-
nition session. You can also press and
hold the

button on the steering

wheel for 1.5 seconds at any time to end
the Voice Recognition session. Whenever
the Voice Recognition session is can-
celed, a double beep is played to indicate
you have exited the system.

• If you want to adjust the volume of the

voice feedback, push the (+ or -) volume
control switches on the steering wheel
while being provided with feedback. You
can also use the radio volume control
knob.

Voice Prompt Interrupt

In most cases you can interrupt the voice
feedback to speak the next command by
pressing the

button on the steering

wheel. After interrupting the system, wait
for a beep before speaking your command.

One Shot Call (if so equipped)

To use the system faster, you may speak
the second level commands with the main
menu command on the main menu. For
example, press the

button and after

the tone say, “Call Redial”.

4-52

Monitor, climate, audio, phone and voice recognition systems

INDICATORS

When

cellular

phone

connected

through the Bluetooth® wireless connec-
tion, indicators

for the phone and text

messaging are displayed on the top of the
screen.

Indicator

Description

Indicates there are unread received
messages.

Indicates the Bluetooth® device that
is currently connected.

Indicates the strength of the signal
the Bluetooth® device is receiving.

Indicates the amount of remaining
Bluetooth® device battery.

CONTROL BUTTONS

The control buttons for the Bluetooth®
Hands-Free Phone System are located on
the steering wheel.

VOICE COMMAND BUTTON
Press and hold the

button

for less than 1.5 seconds to initi-
ate the Voice Recognition session.
To exit the Voice Recognition ses-
sion press and hold the

for

less than 1.5 seconds. For addi-
tional information, see “Voice
prompt interrupt” (P. 4-52).

You can use the

button to

interrupt the system feedback
and give a command at once.

If an iPhone® is connected, Siri®
can be accessed by pressing the

button for more than two

seconds. For additional informa-
tion, see “Siri® Eyes Free” (P. 4-46).

PHONE BUTTON
To answer an incoming call or to
end a call press the

button.

To reject a call press and hold the

button.

LHA4723

LHA5734

Monitor, climate, audio, phone and voice recognition systems

4-53

BLUETOOTH® CONNECTING
PROCEDURE

NOTE:

The connecting procedure must be per-
formed when the vehicle is stationary.
If the vehicle starts moving during the
procedure, the procedure will be canceled.

To connect a phone to the Bluetooth®
Hands-Free Phone System:

Manual Connecting Procedure

1. Press the

MENU button on the con-

trol panel.

2. Touch the “Connections” key on the

screen.

3. In the Bluetooth tab, touch the “Add New”

key to connect a phone.

4. When a compatible phone is found a

message with a PIN appears on the
screen.

5. Verify the PIN is correct and accept the

connection.

6. To access the Bluetooth® settings menu

touch the “

” key on the Connections

screen.

The

following

options

are

available:

Menu Item

Result

Bluetooth

Allows user to switch Bluetooth® on and off. Bluetooth® must be turned on in order to connect a device.

Turns Bluetooth® functionality on. To turn off, touch the “ON” key again. The indicator light will go off.

Favorite (Connection first)

Allows user to toggle “Phone” and “Audio” favorite settings on and off.

Allows user to customize the PIN to a four digit number.

LHA4726

4-54

Monitor, climate, audio, phone and voice recognition systems

NOTE:

Some cellular phones may require you to
accept certain permissions in order to
enable features on your Bluetooth® sys-
tem. During the Bluetooth® pairing pro-
cess, please check your cellular phone’s
display for a pop-up with the request to
grant phonebook access.
Granting phonebook access permission
will allow your contacts to be down-
loaded to the vehicle’s Bluetooth® sys-
tem. A pop-up may display on your cellu-
lar phone stating that the Bluetooth®
system would like to access your con-
tacts and call history. Please select
“Allow” or Yes” to grant this permission.

Automatic Connecting Procedure

If no phone is connected to the system,
press and hold the

button on the

steering wheel for less than 1.5 seconds.
After the prompt, speak “Add Phone”, the
system will announce “transferring to the
add phone settings menu”. The system will
start the pairing procedure. When a com-
patible phone is found, a message with a
PIN appears on the screen. Operate the
Bluetooth® phone to complete the con-
nection process. For additional informa-
tion, see “Bluetooth® connections screen”
(P. 4-62).

VOICE COMMANDS

Voice commands can be used to operate
the Bluetooth® Hands-Free Phone System.
Press and hold the

button for less

than 1.5 seconds to bring up the phone
command menu. The commands avail-
able are:
• Call <name>
• Dial <number>
• Recent Calls
• Read/Send Text (if so equipped)
• Siri® (if so equipped)
• Voice Assistant (if so equipped)
• Phonebook
• Quick Dial
• Redial
• Select Phone
• Add Phone
• Call <name> Mobile
• Call <name> Home
• Call <name> Office
• Call <name> Main
• Call <name> Other
• Settings

“Call <name>”

Speak this command to make a call to a
contact that is stored in the phonebook.
Say “Call” followed by a phonebook name to
initiate a call. If the system does not recog-
nize the name it will display a list of similar
names. After the prompt, speak or touch
an item number from the displayed list to
place the call.

“Dial <number>”

Speak this command to make a call with a
spoken phone number. After the prompt,
say “Dial” followed by a 7 to 10 digit phone
number. The system will repeat the num-
ber back. Say “Dial” to initiate the call or
“Correction” to re-enter the phone number.

“Recent Calls”

The following commands are available un-
der “Recent Calls”:
• Incoming Calls

Speak this command to list the last 20
incoming calls to the vehicle. If the call is
from an entry in the phonebook, the
name will be displayed. Otherwise, the
phone number of the incoming call will
be displayed.

Monitor, climate, audio, phone and voice recognition systems

4-55

When prompted, speak or touch the item
number on the screen to place the call.
Touch the “Next” key to move through the
list of incoming calls.

• Outgoing Calls

Speak this command to list the last 20
outgoing calls from the vehicle. If the call
was to an entry in the phonebook, the
name will be displayed. Otherwise, the
phone number of the outgoing call will be
displayed.
When prompted, speak or touch the item
number on the screen to place the call.
Touch the “Next” key to move through the
list of outgoing calls.

• Missed Calls

Speak this command to list the last 20
missed calls to the vehicle. If the call is
from an entry in the phonebook, the
name will be displayed. Otherwise, the
phone number of the missed call will be
displayed.
When prompted, speak or touch the item
number on the screen to place the call.
Touch the “Next” key to move through the
list of missed calls.

“Read Text/Send Text” (if so
equipped)

Speak this command to access text mes-
saging functions. For additional informa-
tion, see “Text messaging” (P. 4-59).

“Phonebook through voice
command”

Speak “Phonebook” to view a list of quick
steps to access entries stored in the
phonebook. Commands are organized by
the phone number type selected in the cel-
lular device. For additional information, re-
fer to the cellular phone’s owner’s manual.

The following commands are available:
• <Say a Contact Name>
• <Say a Contact Name> Main
• <Say a Contact Name> Home
• <Say a Contact Name> Mobile
• <Say a Contact Name> Office
• <Say a Contact Name> Other

For additional information on manually se-
lecting phonebook entries, see “Making a
call” (P. 4-58).

“Quick dial”

Speak this command to access the Quick
dial menu. After the prompt, speak or se-
lect an item number on the displayed list to
place the call. For additional information,
see “Making a call” (P. 4-58).

“Redial”

Speak this command to call the last num-
ber dialed. After the prompt, say “Redial” to
dial the number of the last outgoing call.
The system will display “Redialing <name/
number>”. The name of the phonebook
entry will be displayed if it is available, oth-
erwise the number being redialed will be
displayed.

“Select Phone”

Speak this command to access the Connec-
tions menu. For additional information, see
“Bluetooth® connections screen” (P. 4-62).

“Add Phone”

Speak this command to access the Connec-
tions menu. For additional information, see
“Bluetooth® connections screen” (P. 4-62).

4-56

Monitor, climate, audio, phone and voice recognition systems

“Settings”

Speak this command to access the Sys-
tem Voice settings menu. The system will
exit Voice Recognition mode. Touch one of
the following options on the screen to
change the settings.
• Beep Only for Opening Prompt

By touching the “ON” key, the indicator
light will illuminate, the system voice will
turn off and only a tone will sound when
the Bluetooth® Hands-Free Phone Sys-
tem is activated. To turn the system voice
back on, touch the “ON” key again, the
indicator light will turn off.

• Best Match List

When the system doesn't recognize a
phonebook name or dial number, it will
provide a list of similar sounding results.
To turn this off, touch the “ON” key, the
indicator light will turn off. To turn on,
touch the “ON” key again, the indicator
light will turn on.

PHONE DISPLAY SCREEN

The Phone screen can be displayed by
pressing the

button on the control

panel.

The following options are displayed:
• Quick Dial

Displays the Quick Dial screen. For addi-
tional information, see “Quick dial” (P. 4-56).

• Phonebook

Displays the Phonebook screen. For addi-
tional information, see “Making a call”
(P. 4-58).

• Call History

Displays the Call History screen. For addi-
tional information, see “Making a call”
(P. 4-58).

• Dial Number

Displays the Dial Number screen. For ad-
ditional information, see “Making a call”
(P. 4-58).

• Text Message

Displays the received message screen.
For additional information, see “Text mes-
saging” (P. 4-59).

• Connections

Displays the Connections screen. For ad-
ditional information, see “Bluetooth® con-
nections screen” (P. 4-62).

• Volume

Displays the volume adjustment screen.
For additional information, see “Volume &
beeps” (P. 4-65).

LHA4705

Monitor, climate, audio, phone and voice recognition systems

4-57

MAKING A CALL

To make a call press the

button on the

control panel. Touch an option from menu
screen:
• Phonebook

Select a person and the phone number
you wish to call from the phonebook.
Depending on the device, the phonebook
will be downloaded from the cellular
phone automatically when it is con-
nected. If the automatic download does
not take place, the phone number must
be transferred to the hands-free phone
system from the cellular phone prior to
using this method. For additional infor-
mation, see “Phone and text message
settings” (P. 4-63).

• Call History

Select a phonebook name or phone
number from the recent incoming, out-
going or missed calls tabs. Touch a
phonebook name or phone number
listed to initiate the call.

• Dial Number

Enter the phone number manually using
the keypad displayed on the screen.
Touch the “OK” key on the screen to initi-
ate the call.

For additional options to make a call, see
“Voice commands” (P. 4-55).

RECEIVING A CALL

When a call is received by the phone con-
nected to the vehicle’s Bluetooth® Hands-
Free Phone System, the call information is
displayed on the control panel display.

Press the

button on the steering

wheel or touch the “

Answer” key on

the screen to accept the call. To reject the
call touch the “

Decline” key on the

screen.

If the user is not able to answer the call
right away, touch the “Hold Call” key dis-
played on the screen. A message will be
played for the caller: “I’m not able to take a
call right now.” The user may then accept
the call when available or reject the call.

To reject a call, press and hold the
button on the steering wheel.

DURING A CALL

While a call is active the following options
will appear on the control panel display:
• Mute

Touch this key to mute or unmute the
system.

• Dial Number

Touch this key to dial digits during the
phone call.

• Use Handset

Touch this key to transfer the call to the
handset. To transfer the call back from
the handset to the Bluetooth® Hands-
Free Phone System, press the

but-

ton on the control panel then select the
“Transfer Hands-free” key on the screen.

• Switch Call
This option will only be available when a
second call is active.

supported

the

phone,

the

Bluetooth® Hands-Free Phone System
allows for call waiting functionality. If a
call is received while another call is al-
ready active, a message will be displayed
on the screen. Press the

button on

the steering wheel or touch the “
Answer” key on screen to accept the in-
coming call. Touch the “

Decline” key

on the screen to reject the second call.

While a call is active, press the

button

on the steering wheel to access additional
options.

Speak

one

the

following

commands:
• “Send Digits”

Speak this command followed by the dig-
its to enter digits during the phone call.

• “Switch call”

Speak this command to hold the second
call and switch back to the original call.

4-58

Monitor, climate, audio, phone and voice recognition systems

ENDING A CALL

To end an active call, press the

button

on the steering wheel or touch the “
Hang up” key on the screen.

TEXT MESSAGING (if so equipped)

WARNING

•

Laws in some jurisdictions may re-
strict the use of “Text-to-Speech”.
Check local regulations before using
this feature.

•

Laws in some jurisdictions may re-
strict the use of some of the applica-
tions and features, such as social
networking and texting. Check local
regulations for any requirements.

•

Use the text messaging feature after
stopping your vehicle in a safe loca-
tion. If you have to use the feature
while

driving,

exercise

extreme

caution at all times so full attention
may be given to vehicle operation.

•

If you are unable to devote full atten-
tion to vehicle operation while using
the text messaging feature, pull off
the road to a safe location and stop
your vehicle.

NOTE:

This feature is automatically disabled if
the connected device does not support
the Message Access Profile (MAP). For
additional

information,

refer

the

phone’s owner’s manual for details and
instructions.

NOTE:

Many phones may require special per-
mission to enable text messaging. Check
the phone’s screen during Bluetooth®
pairing. For some phones, you may need
to enable ‘Notifications’ in the phone’s
Bluetooth® menu for text messages to
appear on the head unit. For addi-
tional information, refer to your phone’s
owner’s manual. Text message integra-
tion requires that the phone support
MAP (Message Access Profile) for both
receiving and sending text messages.
Some phones may not support all
text messaging features. Please refer
to

www.nissanusa.com/bluetooth

www.nissan.ca/bluetooth for compati-
bility information, as well as your device’s
owner’s manual.

The system allows for the sending and re-
ceiving of text messages through the ve-
hicle interface.

The availability of the text message func-
tion may vary depending on the cellular
phone.

When the cellular phone connected to the
vehicle receives a text message, a notifica-
tion will appear on the control panel dis-
play. To check the message, touch the
“Read” key. Touch the “Ignore” key to save
the message to be checked later.

Access text messaging through the ve-
hicles Bluetooth® Hands-Free Phone or
through the vehicles control panel.

Text messaging using Bluetooth®
Hands-Free Phone System (if so
equipped)

Sending a text message (if so equipped)

1. Press and hold the

button on the

steering wheel for less than 1.5 seconds.

2. Say “Send Text” after the tone.

3. The system will provide a list of available

commands in order to determine the
recipient of the text message. Choose
from the following:

• Phonebook
• Quick Dial
• Incoming Calls

Monitor, climate, audio, phone and voice recognition systems

4-59

• Outgoing Calls
• Missed Calls
• Dial

4. Once a recipient is chosen, the system

prompts for which message to send.
Nine predefined messages are avail-
able. To choose one of the predefined
messages, speak one of the following
after the tone:

• “Driving, can't text”
• “Call me”
• “On my way”
• “Running late”
• “Okay”
• “Yes”
• “No”
• “Where are you?”
• “When?”

Reading a received text message

1. Press and hold the

button on the

steering wheel for less than 1.5 seconds.

2. Say “Read Text” after the tone.

The display will show a list of 20 messages
with the sender and delivery time. Touch
the “Next” key on the screen to view all mes-

sages. To view a text message press the

button on the steering wheel and

speak the number item list on the screen.
The following options will be available:
• Play

Speak this command to have the system
say the message.

• Reply

Speak this command to send a text mes-
sage response to the sender of the text
message.

• Call

Speak this command to call the sender.

• Previous

Speak this command to move to the pre-
vious text message (if available).

• Next

Speak this command to move to the next
text message (if available).

Siri® Eyes Free

If a connected phone is equipped with Siri®,
it can also be used to create custom mes-
sages that are sent through the phone. For
additional information, see “Siri® Eyes Free”
(P. 4-46).

NOTE:

Text messages are only displayed if the
vehicle speed is less than 5 mph (8 km/h).

NOTE:

For Apple iPhones®, text messages can
only be sent through Siri.

Text messaging using the control
panel

Display received message list

1. Press the

button on the control

panel.

2. Touch the “Text Message” key on the

screen

3. Touch an item on the list to read or reply

to the message.

Up to 100 messages can be stored in the
message list.

Received message screen

Touching the “Read” key on the incoming
message notification screen or selecting a
message from the message list will show
the details of the received message on the
display.

4-60

Monitor, climate, audio, phone and voice recognition systems

Available actions:
• Prev.

Touch this key to read the previous
message.

• Next

Touch this key to read the next message.

• Play/Stop

Touch the “Play” key to have the hands-
free phone system read out the received
message. Touch the “Stop” key to stop
reading.

• Call

If the sender of the message is registered
in the phonebook, touch the “Call” key to
make a call to the sender.

• Reply

A reply message can be selected from
the predefined list.

Sending a text message (if so equipped)

This function may not be supported de-
pending on the cellular phone.

1. Press the

button on the control

panel.

2. Touch the “Text Message” key on the

screen.

3. Touch the “Create Message” key on the

screen.

The following items are available:

Available item

Action

Enter Number by Keypad

Enter the phone number of the recipient using the keypad. Touch the “OK” key to confirm.

Quick Dial

Select a recipient from the quick dial list.

Phonebook

Select a recipient from the phonebook.

Call History

Select a recipient/phone number from call history.

Select Text

Touch to display a list of predefined text messages.

Send

Touch to send the message.

Monitor, climate, audio, phone and voice recognition systems

4-61

BLUETOOTH® CONNECTIONS
SCREEN

“

” (back) key

Bluetooth tab

Connections screen

“Add New” key

“

” (settings) key

“

” (info) key

“

” (Bluetooth® Audio connection) key

“

” (Bluetooth® Hands-Free Phone

System connection) key

Access the Connections screen to change
settings and view Bluetooth® information.
To access the Connections screen press
the

MENU button on the control panel.

Touch the “Connections” key on the screen
then select the Bluetooth tab.

The paired phone will be added to the list
on the Bluetooth® connections screen.

Touching the name of another device on
the list will switch the connected device.

“

” (back) key

Touch the “

” key to go back to the

previous screen.

Connecting Bluetooth®

For additional information on connecting a
cellular phone or device to the Bluetooth®
Hands-Free Phone System, see “Connect-
ing procedure” (P. 4-54).

NOTE:

Some cellular phones or other devices
may cause interference or a buzzing
noise to come from the audio system
speakers. Storing the device in a differ-
ent location may reduce or eliminate the
noise.

Bluetooth tab

This tab will display up to six Bluetooth®
devices. If six devices are already con-
nected, one of the devices must be deleted
before another device can be connected.

“Add New” key

Touch the “Add New” key on the screen to
connect a new Bluetooth® device. For ad-
ditional information, see “Connecting pro-
cedure” (P. 4-54).

“

” (Bluetooth® settings) key

Touch the “

” key on the screen to

display a list of options.
•

Bluetooth

Touch this key to turn the Bluetooth®
connection on or off

•

Favorite (Connection first)

Touch this key to change which device
will be connected first when multiple de-
vices are connected to the vehicle.
Turn the “

” key on or off to make the

device a favorite connection.
Turn the “

” key on or off to make the

device a favorite connection.

LHA4716

4-62

Monitor, climate, audio, phone and voice recognition systems

•

Pin

Touch this key to customize the PIN code.
Input a four digit number then touch the
“OK” key. The new PIN will be set.

“

” (info) key

Touch the “

” key on the screen to

display the information of the cellular
phone or to delete the device.

Touch the “Delete” key to remove a paired
device then select “Yes” when a message
appears.

“

” (Bluetooth® Hands-Free

Phone System connection) key

A list of connected devices will be displayed
on the screen. Touch the “

” key next to

the name to connect a device to the
Hands-Free Phone System. If the phone is
listed as a favorite, a star will appear on the
icon. Touch the key again to disconnect the
device. The device will not be removed
from the list. For additional information on
removing a device, see “

” (info) key

(P. 4-63).

“

” (Bluetooth® Audio

connection) key

A list of connected devices will be displayed
on the screen. Touch the “

” key next to

the

name

connect

device

Bluetooth® Audio. If the device is listed as a
favorite, a star will appear on the icon.
Touch the key again to disconnect the
device. The device will not be removed
from the list. For additional information
on removing a device, see “

” (info) key

(P. 4-63).

PHONE AND TEXT MESSAGE
SETTINGS

Bluetooth® Hands-Free Phone System set-
tings can be changed according to the us-
er’s preference. To access the “Phone” set-
tings menu press the

MENU button on

the control panel. Touch the “Settings” key
then touch the “Phone” key.

LHA4721

Monitor, climate, audio, phone and voice recognition systems

4-63

The following options are available:

Menu Item

Result

Quick Dial

Edit

Entries in the Quick Dial can be edited. For additional information, see “Quick dial” (P. 4-56).

Delete All

Deletes all of the stored phone numbers in quick dial.

Phonebook

Download Entire
Phonebook

All the phone numbers that are stored in a phonebook in the cellular phone that is connected to the vehicle are
downloaded at once. For additional information, refer to the cellular phone’s owner’s manual.

Auto Downloaded

Turns on/off automatic downloading of the phonebook when a new phone is connected.

Text Message

Turns the text messaging function on/off.

Text Message Ringtone

Turn the incoming message sound on/off.

Signature

Turns the signature setting for the outgoing text message on/off.

Auto Reply

Turns the automatic text message reply function on/off.

Auto Reply Text Message

Select the text message to be used for the automatic reply. Choose from a list of predefined messages.

Notifications

Driver Only

When this item is turned on, incoming call notification is displayed only on the handset.

Vehicle Ringtone

Turns the vehicle ringtone on/off.

Automatic Hold

When this item turns on, an incoming call will be put on hold automatically.

4-64

Monitor, climate, audio, phone and voice recognition systems

Volume & beeps

There are several methods to customize
the volume settings.

Volume & Beeps

The Volume & Beeps screen can be found
by pressing the

MENU button on the

control panel, touching the “Settings” key
on the screen and selecting “Volume &
Beeps”. To adjust the volume of the follow-
ing options, touch the “-” and “+” keys on the
screen.

The available settings are:
• Ringtone

Adjust the volume level of the ringtone of
incoming calls.

• Outgoing Call

Adjust the volume level of the outgoing
calls.

• Voice Prompt Vol.

Adjust the volume level of the system
voice.

• Text-to-speech Vol.

Adjust the volume of the replay voice for
text messaging.

• Button Beeps

Turns on/off the button beep sounds and
alarm for prohibited operations.

Volume Settings

The Volume settings screen can be found
by pressing the

button on the control

panel then touching the “Volume” key on
the screen. To adjust the volume of the
following options, touch the “-” and “+” keys
on the screen.

The available settings are:
• Ringtone

Adjust the volume level of the ringtone of
incoming calls.

• Outgoing Call

Adjust the volume level of the outgoing
calls.

“Made for iPod”, “Made for iPhone” and
“Made for iPad” mean that an electronic
accessory has been designed to connect
specifically to iPod, iPhone or iPad, respec-
tively, and has been certified by the devel-
oper to meet Apple performance stan-
dards. Apple is not responsible for the
operation of this device or its compliance
with safety and regulatory standards.
Please note that the use of this accessory
with iPod, iPhone or iPad may affect wire-
less performance.

iPad, iPhone, iPod classic, iPod nano, iPod
shuffle and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other
countries. Lightning is a trademark of
Apple Inc.

iPod®/iPhone®

Monitor, climate, audio, phone and voice recognition systems

4-65

WARNING

•

Do not leave children or adults who
would normally require the assis-
tance of others alone in your vehicle.
Pets should also not be left alone.
They could accidentally injure them-
selves or others through inadvertent
operation of the vehicle. Also, on hot,
sunny days, temperatures in a closed
vehicle could quickly become high
enough to cause severe or possibly
fatal injuries to people or animals.

•

Properly secure all cargo to help pre-
vent it from sliding or shifting. Do not
place cargo higher than the seat-
backs. In a sudden stop or collision,
unsecured cargo could cause per-
sonal injury.

•

Closely supervise children when they
are around cars to prevent them
from playing and becoming locked in
the trunk where they could be seri-
ously injured. Keep the car locked,
with the rear seatback and trunk lid
securely latched when not in use, and
prevent children’s access to car keys.

EXHAUST GAS (carbon monoxide)

WARNING

•

Do not breathe exhaust gases; they
contain colorless and odorless car-
bon monoxide. Carbon monoxide
is dangerous. It can cause uncon-
sciousness or death.

•

If you suspect that exhaust fumes
are entering the vehicle, drive with all
windows fully open, and have the
vehicle inspected immediately.

•

Do not run the engine in closed spaces
such as a garage.

•

Do not park the vehicle with the en-
gine running for any extended length
of time.

•

Keep the rear vent windows, doors and
trunk lids (if so equipped) closed while
driving, otherwise exhaust gases could
be drawn into the passenger compart-
ment. If you must drive with one of
these open, follow these precautions:

1. Open all the windows.
2. Turn the air recirculation mode off

and set the fan speed control to
the highest level to circulate the
air.

•

If electrical wiring or other cable
connections must pass to a trailer
through the seal on the trunk lid or
the body, follow the manufacturer's
recommendation to prevent carbon
monoxide entry into the vehicle.

•

The exhaust system and body should
be inspected by a qualified mechanic
whenever:

a. The vehicle is raised for service.
b. You suspect that exhaust fumes

are entering into the passenger
compartment.

c. You notice a change in the sound

of the exhaust system.

d. You have had an accident involv-

ing damage to the exhaust sys-
tem, underbody, or rear of the
vehicle.

THREE-WAY CATALYST

The three-way catalyst is an emission con-
trol device installed in the exhaust system.
Exhaust gases in the three-way catalyst
are burned at high temperatures to help
reduce pollutants.

PRECAUTIONS WHEN STARTING AND
DRIVING

5-4

Starting and driving

WARNING

•

The exhaust gas and the exhaust sys-
tem are very hot. Keep people, animals
or flammable materials away from the
exhaust system components.

•

Do not stop or park the vehicle over
flammable materials such as dry
grass, waste paper or rags. They may
ignite and cause a fire.

CAUTION

•

Do not use leaded gasoline. Deposits
from leaded gasoline will seriously
reduce the three-way catalyst's abil-
ity to help reduce exhaust pollutants.

•

Keep your engine tuned up. Malfunc-
tions in the ignition, fuel injection, or
electrical systems can cause overrich
fuel flow into the three-way catalyst,
causing it to overheat. Do not keep
driving if the engine misfires, or if no-
ticeable loss of performance or other
unusual operating conditions are
detected. Have the vehicle inspected
promptly. It is recommended that
you visit a NISSAN dealer for this
service.

•

Avoid driving with an extremely low
fuel level. Running out of fuel could
cause the engine to misfire, damag-
ing the three-way catalyst.

•

Do not race the engine while warm-
ing it up.

•

Do not push or tow your vehicle to
start the engine.

TIRE PRESSURE MONITORING
SYSTEM (TPMS)

Each tire, including the spare (if provided),
should be checked monthly when cold and
inflated to the inflation pressure recom-
mended by the vehicle manufacturer on
the vehicle placard or tire inflation pressure
label. (If your vehicle has tires of a different
size than the size indicated on the vehicle
placard or tire inflation pressure label, you
should determine the proper tire inflation
pressure for those tires.)

As an added safety feature, your vehicle
has been equipped with a Tire Pressure
Monitoring System (TPMS) that illuminates
a low tire pressure telltale when one or
more of your tires is significantly under-
inflated. Accordingly, when the low tire
pressure telltale illuminates, you should
stop and check all your tires as soon as

possible, and inflate them to the proper
pressure. Driving on a significantly under-
inflated tire causes the tire to overheat and
can lead to tire failure. Under-inflation also
reduces fuel efficiency and tire tread life,
and may affect the vehicle’s handling and
stopping ability.

Please note that the TPMS is not a substi-
tute for proper tire maintenance, and it is
the driver’s responsibility to maintain cor-
rect tire pressure, even if under-inflation
has not reached the level to trigger illumi-
nation of the TPMS low tire pressure telltale.

Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate
when the system is not operating properly.
The TPMS malfunction indicator is com-
bined with the low tire pressure telltale.
When the system detects a malfunction,
the telltale will flash for approximately one
minute and then remain continuously illu-
minated. This sequence will continue upon
subsequent vehicle start-ups as long as
the malfunction exists. When the malfunc-
tion indicator is illuminated, the system
may not be able to detect or signal low tire
pressure as intended. TPMS malfunctions
may occur for a variety of reasons, includ-
ing the installation of replacement or alter-
nate tires or wheels on the vehicle that

Starting and driving

5-5

prevent the TPMS from functioning prop-
erly. Always check the TPMS malfunction
telltale after replacing one or more tires or
wheels on your vehicle to ensure that the
replacement or alternate tires and wheels
allow the TPMS to continue to function
properly.

Additional information:

• When using a wheel without the TPMS

such as the spare tire, the TPMS does not
monitor the tire pressure of the spare tire.

• The TPMS will activate only when the ve-

hicle is driven at speeds above 16 mph (25
km/h). Also, this system may not detect a
sudden drop in tire pressure (for example,
a flat tire while driving).

• The low tire pressure warning light does

not automatically turn off when the tire
pressure is adjusted. After the tire is in-
flated to the recommended pressure, the
vehicle must be driven at speeds above
16 mph (25 km/h) to activate the TPMS
and turn off the low tire pressure warning
light. Use a tire pressure gauge to check
the tire pressure.

• The “Tire Pressure Low — Add Air” or

“CHECK TIRE PRES” warning appears each
time the ignition switch is placed in the
ON position as long as the low tire pres-
sure warning light remains illuminated.

• The “Tire Pressure Low — Add Air” warning

appears in the vehicle information dis-
play or the “CHECK TIRE PRES” warning
appears in the trip computer when the
low tire pressure warning light is illumi-
nated and low tire pressure is detected.
The “Tire Pressure Low — Add Air” or
“CHECK TIRE PRES” warning turns off
when the low tire pressure warning light
turns off.

• The “Tire Pressure Low — Add Air” or “CHECK

TIRE PRES” warning does not appear if the
low tire pressure warning light illuminates
to indicate a TPMS malfunction.

• Tire pressure rises and falls depending on

the heat caused by the vehicle’s opera-
tion and the outside temperature. Do not
reduce the tire pressure after driving
because the tire pressure rises after driv-
ing. Low outside temperature can lower
the temperature of the air inside the tire
which can cause a lower tire inflation
pressure. This may cause the low tire
pressure warning light to illuminate. If the
warning light illuminates, check the tire
pressure for all four tires.

• The Tire and Loading Information label is

located in the driver's door opening.

• You can also check the pressure of all

tires (except the spare tire) on the vehicle
information display (if so equipped). The
order of the tire pressure figures dis-
played on the screen corresponds with
the actual order of the tire position.

For additional information, see “Low tire
pressure warning light” (P. 2-18) and “Tire
Pressure Monitoring System (TPMS)” (P. 6-3).

WARNING

•

Radio waves could adversely affect
electric medical equipment. Those
who use a pacemaker should contact
the electric medical equipment manu-
facturer for the possible influences
before use.

•

If the low tire pressure warning light
illuminates while driving, avoid sud-
den steering maneuvers or abrupt
braking, reduce vehicle speed, pull
off the road to a safe location and
stop the vehicle as soon as possible.
Driving with under-inflated tires may
permanently damage the tires and
increase the likelihood of tire failure.
Serious vehicle damage could occur
and may lead to an accident and

5-6

Starting and driving

could result in serious personal in-
jury. Check the tire pressure for all
four tires. Adjust the tire pressure to
the recommended COLD tire pres-
sure shown on the Tire and Loading
Information label to turn the low tire
pressure warning light off. If you have
a flat tire, replace it with a spare tire
as soon as possible. (For additional
information, see “Flat tire” (P. 6-3) for
changing a flat tire.)

•

When using a wheel without the
TPMS such as the spare tire, when a
spare tire is mounted or a wheel is
replaced, the TPMS will not function
and the low tire pressure warning
light will flash for approximately 1
minute. The light will remain on after
1 minute. Have your tires replaced
and/or TPMS system reset as soon as
possible. It is recommended that you
visit a NISSAN dealer for this service.

•

Replacing tires with those not origi-
nally specified by NISSAN could affect
the proper operation of the TPMS.

•

Do not inject any tire liquid or aerosol
tire sealant into the tires, as this may
cause a malfunction of the tire pres-
sure sensors.

CAUTION

•

The TPMS may not function properly
when the wheels are equipped with
tire chains or the wheels are buried in
snow.

•

Do not place metalized film or any
metal parts (antenna, etc.) on the
windows. This may cause poor re-
ception of the signals from the tire
pressure sensors, and the TPMS will
not function properly.

Some devices and transmitters may tem-
porarily interfere with the operation of the
TPMS and cause the low tire pressure
warning light to illuminate.

Some examples are:
• Facilities or electric devices using similar

radio frequencies are near the vehicle.

• If a transmitter set to similar frequencies

is being used in or near the vehicle.

• If a computer (or similar equipment) or a

DC/AC converter is being used in or near
the vehicle.

The low tire pressure warning light may
illuminate in the following cases:
• If the vehicle is equipped with a wheel and

tire without TPMS.

• If the TPMS has been replaced and the ID

has not been registered.

• If the wheel is not originally specified by

NISSAN.

FCC Notice:

For USA:

NOTE:
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user's au-
thority to operate the equipment.

Starting and driving

5-7

For Canada:

This device contains licence-exempt trans-
mitter(s)/receiver(s) that comply with Inno-
vation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation
is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interfer-
ence, including interference that may cause
undesired operation of the device.

TPMS with Easy-Fill Tire Alert

When adding air to an under-inflated tire,
the TPMS with Easy-Fill Tire Alert provides
visual and audible signals outside the ve-
hicle to help you inflate the tires to the rec-
ommended COLD tire pressure.

Vehicle set-up:

1. Park the vehicle in a safe and level place.

2. Apply the parking brake and place the

shift lever in the P (Park) position (if so
equipped).

3. Place the ignition switch in the ON posi-

tion. Do not start the engine.

Operation:

1. Add air to the tire.

2. After a few seconds, the hazard indica-

tors will start flashing.

3. When the designated pressure is reached,

the horn beeps once and the hazard indi-
cators stop flashing.

4. Perform the above steps for each tire.

• If the tire is over-inflated more than

approximately 4 psi (30 kPa), the horn
beeps and the hazard indicators flash
three times. To correct the pressure,
push the core of the valve stem on the
tire briefly to release pressure. When
the pressure reaches the designated
pressure, the horn beeps once.

• If the hazard indicator does not flash

within approximately 15 seconds after
starting to inflate the tire, it indi-
cates that the Easy-Fill Tire Alert is not
operating.

• The TPMS will not activate the Easy-Fill

Tire Alert under the following conditions:

– If there is interference from an exter-

nal device or transmitter.

– The air pressure from the inflation

device is not sufficient to inflate the
tire.

– There is a malfunction in the TPMS.
– There is a malfunction in the horn or

hazard indicators.

– The identification code of the tire’s

pressure sensor is not registered to
the system.

– The battery of the tire pressure sen-

sor is low.

• If the Easy-Fill Tire Alert does not oper-

ate due to TPMS interference, move
the vehicle about 3 ft (1 m) backward
or forward and try again.

If the Easy-Fill Tire Alert is not working, use a
tire pressure gauge.

AVOIDING COLLISION AND
ROLLOVER

WARNING

Failure to operate this vehicle in a safe
and prudent manner may result in loss
of control or an accident.

Be alert and drive defensively at all times.
Obey all traffic regulations. Avoid excessive
speed, high speed cornering, or sudden
steering maneuvers, because these driving
practices could cause you to lose control of
your vehicle.

5-8

Starting and driving

As with any vehicle, loss of control could
result in a collision with other vehicles or
objects or cause the vehicle to roll over,
particularly if the loss of control causes
the vehicle to slide sideways.

Be attentive at all times, and avoid driving
when tired. Never drive when under the in-
fluence of alcohol or drugs (including pre-
scription or over-the-counter drugs which
may cause drowsiness). Always wear your
seat belt as outlined in the “Safety – Seats,
seat belts and supplemental restraint sys-
tem” section of this manual, and also in-
struct your passengers to do so.

Seat belts help reduce the risk of injury in
collisions and rollovers.

In a rollover crash, an unbelted person is
significantly more likely to die than a
person wearing a seat belt.

OFF-ROAD RECOVERY

While driving, the right side or left side
wheels may unintentionally leave the road
surface. If this occurs, maintain control of
the vehicle by following the procedure be-
low. Please note that this procedure is only
a general guide. The vehicle must be driven

as appropriate based on the conditions of
the vehicle, road and traffic.

1. Remain calm and do not overreact.

2. Do not apply the brakes.

3. Maintain a firm grip on the steering

wheel with both hands and try to hold a
straight course.

4. When appropriate, slowly release the ac-

celerator pedal to gradually slow the
vehicle.

5. If there is nothing in the way, steer the

vehicle to follow the road while vehicle
speed is reduced. Do not attempt to
drive the vehicle back onto the road sur-
face until vehicle speed is reduced.

6. When it is safe to do so, gradually turn

the steering wheel until both tires return
to the road surface. When all tires are on
the road surface, steer the vehicle to
stay in the appropriate driving lane.

• If you decide that it is not safe to return

the vehicle to the road surface based
on vehicle, road or traffic conditions,
gradually slow the vehicle to a stop in
a safe place off the road.

RAPID AIR PRESSURE LOSS

Rapid air pressure loss or a “blow-out” can
occur if the tire is punctured or is damaged
due to hitting a curb or pothole. Rapid air
pressure loss can also be caused by driving
on under-inflated tires.
Rapid air pressure loss can affect the han-
dling and stability of the vehicle, especially
at highway speeds.
Help prevent rapid air pressure loss by
maintaining the correct air pressure and
visually inspecting the tires for wear and
damage. For additional information, see
“Wheels and tires” (P. 8-27). If a tire rapidly
loses air pressure or “blows-out” while driv-
ing, maintain control of the vehicle by fol-
lowing the procedure below. Please note
that this procedure is only a general guide.
The vehicle must be driven as appropriate
based on the conditions of the vehicle, road
and traffic.

WARNING

The following actions can increase the
chance of losing control of the vehicle if
there is a sudden loss of tire air pres-
sure. Losing control of the vehicle may
cause a collision and result in personal
injury.

Starting and driving

5-9

Nissan Versa (2024 year). Manual in english - page 8