|
|
Bulb arrangement in the halogen headlights Fig. 362 Left headlight Read and observe and on page 300 first. Bulb arrangement Flashing Changing the bulb for the front turn signal light Fig. 363 Changing the bulb for the front turn signal light Read and observe and on page 300 first. › Remove the protective cap A
› Remove the holder with the bulb by jiggling it out in the direction of the ar- row 1
› Hold the holder with the bulb in the locations shown by the arrows. › Remove the faulty bulb from the holder in the direction of the arrow 2 . › Insert a new bulb in the holder until it stops. A › Slide the holder with the bulb with the fixing lug B upwards so that it fits into the recess on the reflector. › Fit the protective cap A
Removing bulbs for low and main beam Fig. 364 Removing bulbs for low and main beam Read and observe and on page 300 first. › Remove the protective caps B and C › Turn the holder with the bulb in the direction of arrow 1
› Remove the holder with the bulb in the direction of arrow 2 . › Remove the bulb from the holder in the direction of the arrow 3 . › Insert a new bulb into the connector so that the lug A on the connector snaps into the groove on the bulb. › Insert the connector with the new bulb into the headlight in the opposite di- rection to the arrow 2 . › Turn the connector with the new bulb in the opposite direction to the arrow 1 until it stops. › Use the protective caps B and C 301 Fuses and light bulbs |