Nissan Sentra (2024 year). Manual in english

Driver Assistance

The driver assistance menu allows the user to change the settings for driving, parking, and braking aids.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Emergency Brake

Displays available emergency braking options.

Front

Allows user to turn the front emergency braking system on or off. For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian Detection” (P. 5-91) and “Intelligent Forward Collision Warning (I-FCW)”
(P. 5-104).

Rear

Allows user to turn the rear emergency braking system on or off. For additional information, see "Rear Automatic
Braking (RAB)” (P. 5-84).

Lane

Displays available lane options.

Lane Departure Warning

Allows user to turn the Lane Departure Warning (LDW) system on or off. For additional information, see “Lane De-
parture Warning (LDW)” (P. 5-29).

Blind Spot

Displays available blind spot options.

Blind Spot (BSW)

Allows user to turn the Blind Spot Warning (BSW) system on or off. For additional information, see “Blind Spot
Warning (BSW)” (P. 5-36).

Speed Limit Sign

Allows user to turn the Traffic Sign Recognition (TSR) system on or off. For additional information, see “Traffic Sign
Recognition (TSR)” (P. 5-25).

Parking Aids

Displays available parking aids.

Display

Allows user to auto display the sonar. For additional information, see “Rear Sonar System (RSS)” (P. 5-133).

Rear Sensor

Allows user to turn the rear sonar on or off.

Distance

Allows user to set the distance sensor range to Long/Medium/Short.

Volume

Allows the user to set the parking sensor volume to High/Medium/Low.

Rear Cross Traffic Alert

Allows user to turn the Rear Cross Traffic Alert (RCTA) system on or off. For additional information, see “Rear Cross
Traffic Alert (RCTA)” (P. 5-48).

Driver Attention Alert

Allows user to turn the Intelligent Driver Alertness (I-DA) on or off. For additional information, see “Intelligent Driver
Alertness (I-DA)” (P. 5-117).

Chassis Control

Displays available chassis control options.

2-22

Instruments and controls

ECO Mode Setting

The ECO mode setting menu allows the user to change the settings for the ECO mode.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

ECO Customize

Displays available ECO mode settings.

Cruise Control

Allows user to set the Cruise Control mode to Normal or ECO. For additional information, see “Cruise Control”
(P. 5-59).

Air Conditioning

Allows user to set the Air Conditioning mode to Normal or ECO. For additional information, see “Heater and air
conditioner” (P. 4-33, 4-40).

ECO Info Settings

Displays available ECO information settings.

ECO Indicator

Allows user to turn the ECO indicator on or off.

ECO Drive Report

Allows user to turn the ECO Drive Report on or off.

View History

Displays the history report for the vehicle.

TPMS Settings

The TPMS settings menu allows the user to change the tire pressure units displayed in the vehicle information display.

Menu item

Explanation

TPMS Setting

Displays available TPMS settings.

Tire Pressure Unit

Allows user to select the tire pressure units that will display in the vehicle information display.

Clock

Menu item

Explanation

Clock

Allows user to adjust the clock settings and time within the vehicle information display. Adjustments that can
be made include automatically setting the time, 12H/24H format and manually setting the time. If these op-
tions do not appear, the clock must be set within the center display. For additional information, refer to the
separate NissanConnect® Owner’s Manual (if so equipped).

Instruments and controls

2-23

Vehicle Settings

The vehicle settings allow the user to change the lighting and locking settings.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Lighting

Displays the available option for lighting.

Auto Headlight

Displays the auto headlight options.

Turn on earliest

Allows user to enable the turn on earliest setting.

Turn on earlier

Allows user to enable the turn on earlier setting.

Turn on standard

Allows user to enable the turn on standard setting.

Turn on later

Allows user to enable the turn on later setting.

Locking

Displays the available locking options.

Selective Unlock

Allows user to turn selective unlock on or off. When the door handle request switch on the driver’s door is
pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the
door unlock operation is performed again within 1 minute. When the door handle request switch on the front
passenger’s door is pushed to be unlocked, all the doors will be unlocked. When this item is turned off, all the
doors will be unlocked after the door unlock operation is performed once.

Auto Door Unlock

Displays the auto door unlock options.

Shift to Park

Doors will unlock when the vehicle is shifted into P (Park).

IGN OFF

Doors will unlock when the ignition is turned off.

OFF

Doors will have to be manually unlocked.

Horn beeps on lock

Allows user to turn answer back horn on or off. When turned on, the horn will chirp and the hazard indicators
will flash once when locking the vehicle with the Intelligent Key.

Wipers

Displays the various wipers settings. For additional information, see “Wiper and washer switch” (P. 2-56)

Speed Dependent

Allows the user to turn the speed dependent feature on or off.

Rear Door Alert

Displays the available Rear Door Alert options. For additional information, see “Rear Door Alert” (P. 2-68).

Horn & Alert

When selected, the alert is displayed and horn sounds.

Alert Only

When selected, only the alert is displayed.

OFF

When selected, no alert or horn will be active.

2-24

Instruments and controls

Maintenance

The maintenance menu allows the user to set reminders for various vehicle maintenance items.

WARNING

The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. For additional informa-
tion, see “Changing wheels and tires” (P. 8-38). Many factors including tire inflation, alignment, driving habits and road conditions
affect tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does not
mean your tires will last that long. Use the tire replacement indicator as a guide only and always perform regular tire checks.
Failure to perform regular tire checks, including tire pressure checks could result in tire failure. Serious vehicle damage could
occur and may lead to a collision, which could result in serious personal injury or death.

Menu item

Explanation

Maintenance

Displays various maintenance reminder options.

Oil Control System

Allows user to reset the current interval. This should only be done after completing oil change maintenance.

Oil and Filter

Allows user to set a reminder at a specific interval or reset the current one.

Tire

Allows user to set a reminder at a specific interval or reset the current one.

Other

Allows user to set a reminder at a specific interval or reset the current one.

Instruments and controls

2-25

Customize Display

The customize display menu allows the user to customize the information that appears in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Main menu selection

Displays available screens that can be shown in the vehicle information display.

Speed

Allows user to turn the speed screen on or off in the vehicle information display.

Blank

Allows user to turn the blank on or off in the vehicle information display.

Fuel Economy

Allows user to turn the fuel economy screen on or off in the vehicle information display.

ECO Pedal Guide

Allows user to turn the ECO pedal guide on or off in the vehicle information display.

Drive Computer

Allows user to turn the drive computer screen on or off in the vehicle information display.

TPMS

Allows user to turn the TPMS screen on or off in the vehicle information display.

TSR

Allows user to turn the TSR screen on or off in the vehicle information display.

Audio

Allows user to turn the audio screen on or off in the vehicle information display.

Driving Aids

Allows user to turn the driving aids screen on or off in the vehicle information display.

Welcome Effect

Displays the available welcome effect settings.

Gauges

Allows user to turn the gauges effect on or off.

Animation

Allows user to turn the animation effect on or off.

Light/Wiper

Displays the available light and wiper guidance settings.

Headlights mode guidance

Allows user to turn the light mode guidance on or off.

Wiper mode guidance

Allows user to turn the wiper mode guidance on or off.

2-26

Instruments and controls

Unit

The unit menu allows the user to change the units shown in the vehicle information display.

Menu item

Explanation

Mileage/Fuel

Displays the available mileage display units.

Tire Pressure

Displays the available mileage display units.

Temperature

Displays the available temperature display units.

Language

The language menu allows the user to change the languages displayed in the vehicle information display.

Menu item

Explanation

Language

Displays available language options for the vehicle information display.

Factory Reset

The factory reset menu allows the user to restore the vehicle information display settings to factory status.

Menu item

Explanation

Factory Reset

Allows user to reset the vehicle information display settings to the original factory settings. Once selected,
the user can confirm or cancel the reset.

Instruments and controls

2-27

VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS

The following messages may appear in
your vehicle information display.

Engine start operation for
Intelligent Key system (if
I-Key battery level is low)

This indicator appears when the battery of
the Intelligent Key is low and when the In-
telligent Key system and the vehicle are not
communicating normally.

If this appears, touch the ignition switch
with the Intelligent Key while depressing
the brake pedal. For additional information,
see “NISSAN Intelligent Key® battery dis-
charge” (P. 5-13)

Key Battery Low

This indicator appears when the Intelligent
Key battery is running out of power.

If this indicator appears, replace the bat-
tery with a new one. For additional infor-
mation, see “Battery replacement” (P. 8-23).

Key ID Incorrect

This warning appears when the ignition
switch is placed from the OFF position and
the Intelligent Key is not recognized by the
system. You cannot start the engine with
an unregistered key.

For additional information, see “NISSAN In-
telligent Key®” (P. 3-6).

Key System Error: See
Owner’s Manual

After the ignition switch is placed in the ON
position, this warning appears for a period
of time and then turns off.

The Key System Error message warns of a
malfunction with the Intelligent Key sys-
tem. If the warning appears while the en-
gine is stopped, it may be impossible to
start the engine.

If the warning appears while the engine is
running, you can drive the vehicle. However,
in these cases, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.

No Key Detected

This warning appears when the Intelligent
Key is left outside the vehicle with the igni-
tion switch in the ON position. Make sure
the Intelligent Key is inside the vehicle.

For additional information, see “NISSAN In-
telligent Key®” (P. 3-6).

No Key Press and hold to
Stop Engine

This message appears when the Intelligent
key is not detected and the engine should
be turned off.

Rotate Steering Wheel and
Push Start Switch

This indicator appears when the steering
lock cannot be released.

If this indicator appears, push the ignition
switch while lightly turning the steering
wheel right and left.

Rear Door Alert is activated

When the system is enabled, this message
appears when the Rear Door Alert system
is active and can remind the driver to check
the back seat.

2-28

Instruments and controls

• Using the steering wheel switch, a driver

can select “Dismiss Message” to clear the
display for a period of time. If no selection
is made, this message automatically
turns off after a period of time. If this mes-
sage does not automatically turn off, it is
not a malfunction.

• Using the steering wheel switch, a driver

can select “Disable Alert” to disable the
selected alert for the remainder of the
current trip.

WARNING

Selecting “Dismiss Message” during a
stop within a trip temporarily dis-
misses the message for that stop with-
out turning the system off. Alerts can
be provided for other stops during the
trip. Selecting “Disable Alert” turns off
the Rear Door Alert system for the re-
mainder of a trip and no audible alert
will be provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-17).

For additional information, see “Rear Door
Alert” (P. 2-68).

Check Rear Seat For All Articles

When the system is enabled, this message
appears when the vehicle comes to a com-
plete stop, the vehicle is transitioned from
the D (Drive) position to P (Park) position,
and the driver exits the vehicle. This mes-
sage alerts the driver, after a period of time,
to check for items in the rear seat after the
audible alert has been provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-17).

For additional information, see “Rear Door
Alert” (P. 2-68).

Door/Trunk Open

This warning appears when a door has
been opened.

Drive sport mode indicator

A small “S” appears to the right of the Trans-
mission Shift Position indicator in the ve-
hicle information display when the drive
sport mode is engaged.

Activate the drive sport mode by pushing
the switch on the shift lever while the shift
lever is in the D (Drive) position.

For additional information, see “Drive sport
mode switch” (P. 5-19)

Headlight System Error: See Owner’s
Manual

This warning appears when the LED head-
lights are not functioning properly.

If this warning appears, have your system
checked. It is recommended that you visit a
NISSAN dealer for this service.

Illumination indicator

This indicator appears when the vehicle
information display screen brightness is
being adjusted.

Instruments and controls

2-29

Loose Fuel Cap

This warning appears when the fuel-filler
cap is not tightened correctly after the ve-
hicle has been refueled. For additional in-
formation, see “Fuel-filler cap” (P. 3-22)

Low Fuel

This warning appears when the fuel level in
the fuel tank is getting low. Refuel as soon
as it is convenient, preferably before the
fuel gauge reaches 0 (Empty).

There will be

a small reserve of fuel in the tank when
the fuel gauge needle reaches 0 (Empty).

Low Oil Pressure: See
Owner’s Manual

This warning appears in the message area
of the vehicle information display if low oil
pressure is detected. This gauge is not de-
signed to indicate low oil level.

The low oil

pressure warning is not designed to indi-
cate a low oil level.

Use the dipstick to

check the oil level. For additional informa-
tion, see “Engine oil” (P. 8-6).

Low Outside Temperature

This warning appears if the outside tem-
perature is below 37°F (3°C). The tempera-
ture can be changed to display in Celsius or
Fahrenheit. For additional information, see
“Settings” (P. 2-21).

Low Washer Fluid

This warning appears when the windshield-
washer fluid is at a low level. Add windshield-
washer fluid as necessary. For additional
information, see “Windshield-washer fluid”
(P. 8-12).

Outside Temperature
Display

The outside temperature display appears
in the center region of the vehicle informa-
tion display.

Power will turn off to save the battery

This message appears in the vehicle infor-
mation display after a period of time if the
ignition switch is in the ON position and if
the vehicle is in P (Park). For additional infor-
mation, see “Push-button ignition switch
positions” (P. 5-12).

Power turned off to save the battery

This message appears after the ignition
switch is automatically turned off. For addi-
tional information, see “Push-button igni-
tion switch positions” (P. 5-12).

Push brake and start
switch to drive

This indicator appears when the shift lever
is in the P (Park) position.

This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed. You can start
the engine from any position of the ignition
switch.

Push clutch and start
switch to drive

This indicator appears when the shift lever
is in the N (Neutral) position.

This indicator means that the engine will
start by pushing the ignition switch with
the clutch and brake pedal depressed. You
can start the engine from any position of
the ignition switch.

2-30

Instruments and controls

Rear seat belt reminder

This warning appears for 35 seconds after
the ignition is placed in the ON position and
the engine is started.

This warning message shows the status of
the three rear seat belts. When one of the
rear seat belts are buckled, the corre-
sponding rear seat belt indicator will ap-
pear grey. When one of the rear seat belts
are unbuckled, the corresponding rear seat
belt indicator will appear red.

After a change in buckle status, a chime will
sound and the warning will appear for an-
other 35 seconds.

Release Parking Brake

This warning appears when the parking
brake is set and the vehicle is driven.

Reminder: Turn OFF
Headlights

This warning appears when the headlights
are left in the ON position when exiting the
vehicle. Place the headlight switch in the
OFF or AUTO position. For additional infor-
mation, see “Headlight and turn signal
switch” (P. 2-58).

Shift to Park

This warning appears when the ignition
switch is in the AUTO ACC or OFF position
and the shift lever is not in the P (Park)
position. Also, a chime sounds when the
ignition switch is in the AUTO ACC or OFF
position.

If this warning appears, move the shift lever
to the P (Park) position and start the engine.

Shipping Mode On Push Storage Fuse

This warning may appear if the extended
storage switch is not pushed in. When this
warning appears, push in the extended
storage switch to turn off the warning. For
additional information, see “Extended stor-
age switch” (P. 2-71), and/or “Fuses” (P. 8-20).

Tire Pressure Low - Add Air

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected. The
warning appears each time the ignition
switch is placed in the ON position as long
as the low tire pressure warning light re-
mains illuminated. If this warning appears,
stop the vehicle and adjust the tire pres-
sures of all four tires to the recommended
COLD tire pressure shown on the Tire and

Loading Information label. For additional
information, see “Low tire pressure warning
light” (P. 2-12) and “Tire Pressure Monitoring
System (TPMS)” (P. 5-5).

TPMS Error: See Owner’s Manual

This warning appears when there is an er-
ror with your TPMS. If this warning comes
on, have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

Transmission Shift Position
indicator

This indicator shows the transmission shift
position.

CVT hot Power reduced

This transmission has a high fluid tem-
perature protection mode. If the fluid tem-
perature becomes too high (for example,
climbing steep grades in high tempera-
tures with heavy loads, such as when tow-
ing a trailer), engine power and, under
some conditions, vehicle speed will be de-
creased

automatically

reduce

the

chance of transmission damage. Vehicle
speed can be controlled with the accelera-
tor pedal, but the engine and vehicle speed
may be reduced.

Instruments and controls

2-31

WARNING

When the high fluid temperature pro-
tection mode operation occurs, vehicle
speed may be gradually reduced. The
reduced speed may be lower than
other traffic, which could increase the
chance of a collision. Be especially
careful when driving. If necessary, pull
to the side of the road at a safe place
and allow the transmission to return to
normal operation; or have it repaired if
necessary.

CVT Malfunction Service
now

This warning appears when there is a
problem with the CVT system. If this
warning comes on, have the system
checked. It is recommended that you visit a
NISSAN dealer for this service.

Engine Oil Service due
in – – – miles

This distance to oil change is displayed if
the distance to oil change is less than
62 miles (100 km).

Automatic Emergency
Braking with Pedestrian
Detection warning
indicator

This indicator appears along, with an au-
dible warning, when the system detects
the possibility of a forward collision.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-91) and “Intelligent Forward
Collision Warning (I-FCW)” (P. 5-104).

BSW/RCTA indicator

This indicator appears when the BSW sys-
tem is engaged.

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-36).

BSW/RCTA System
Malfunction: See Owner’s
Manual

This warning appears when the Blind Spot
Warning/Rear Cross Traffic Alert systems
are not functioning properly. For additional
information, see “Blind Spot Warning (BSW)”
(P. 5-36) and “Rear Cross Traffic Alert (RCTA)”
(P. 5-48).

Cruise control indicator

This indicator shows the cruise control sys-
tem status.

When cruise control is activated, a green
circle will appear to indicate it is set. The
vehicle information display will also display
the speed the cruise control was set at. If
you accelerate past the set speed, the
speed will blink until you either cancel
cruise control or go back to the set speed. If
cruise control is on and canceled, the
speed will be displayed to show the speed
the vehicle will return to if the resume but-
ton is activated.

Driver Attention Alert
Malfunction

This warning appears when the Intelligent
Driver Alertness system is not functioning
properly. For additional information, see “In-
telligent Driver Alertness (I-DA)” (P. 5-117).

Take a Break?

This alert appears when the system has
detected that the driver may be displaying
fatigue or a lack of attention.

2-32

Instruments and controls

Driving Aids Temporarily Disabled
Front Sensor Blocked See Manual

This message appears when the front ra-
dar sensor may be obstructed due to:
• mud, dirt, snow, ice, etc.
• inclement weather (rain, fog, snow, etc.)

All forward driving aids are temporarily dis-
abled until the system detects that the
front radar sensor is no longer obstructed.

For additional information, see:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection (P. 5-91)

• Intelligent Forward Collision Warning (I-

FCW) (P. 5-104)

ECO mode indicator

This indicator appears when the ECO
mode is engaged.

For additional information, see “ECO mode
switch” (P. 5-23).

Idling Stop System

This indicator shows the Idling Stop Sys-
tem status.

For addition information, see “Idling Stop
System” (P. 5-138).

Lane Departure Warning
(LDW) indicator

This indicator appears when the LDW sys-
tem is engaged.

For additional information, see “Lane De-
parture Warning (LDW)” (P. 5-29).

Malfunction

This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Intelligent

Forward

Collision

Warning

(I-FCW)

If one or more of these warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-91) or “Intelligent Forward
Collision Warning (I-FCW) (P. 5-104).

Not Available System Malfunction

This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly.
• Blind Spot Warning (BSW)

• Lane Departure Warning (LDW)
• Rear Automatic Braking (RAB)

If one or more of these warnings appear,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

For additional information, see " “Blind Spot
Warning (BSW)” (P. 5-36), “Lane Departure
Warning (LDW)” (P. 5-29).or Rear Automatic
Braking (RAB)” (P. 5-84).

Parking Sensor Error: See
Owner’s Manual

This warning appears when there is an er-
ror with the system. For additional informa-
tion, see “Rear Sonar System (RSS)” (P. 5-133).

Rear Automatic Braking
(RAB) system warning
indicator

This indicator appears to indicate the sta-
tus of the Rear Automatic Braking (RAB)
system. For additional information, see
“Rear Automatic Braking (RAB)” (P. 5-84).

Instruments and controls

2-33

Side Radar Obstruction

This message appears when the Blind
Spot Warning (BSW) or Rear Cross Traffic
Alert (RCTA) systems become unavailable
because a radar blockage is detected. For
additional information, see “Blind Spot
Warning (BSW)” (P. 5-36) and “Rear Cross
Traffic Alert (RCTA)” (P. 5-48).

Speed Limit Sign indicator

This message may appear when the Traffic
Sign Recognition system is engaged.

For additional information, see “Traffic Sign
Recognition (TSR)” (P. 5-25).

Unavailable: High Cabin Temperature

This message appears when the camera
detects an interior temperature of more
than approximately 104°F (40°C). For addi-
tional information, see “Traffic Sign Recog-
nition (TSR)” (P. 5-25).

Unavailable: High Camera
Temperature

This message appears when the camera
detects an interior temperature of more
than 104°F (40°C). For additional informa-
tion, see “Traffic Sign Recognition (TSR)”
(P. 5-25).

Vehicle ahead detection
indicator

This indicator appears when the following
systems are engaged and have detected a
vehicle:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Intelligent

Forward

Collision

Warning

(I-FCW)

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-91) and “Intelligent Forward
Collision Warning (I-FCW)” (P. 5-104).

The vehicle information display is located
to the left of the speedometer. It displays
such items as:
• Vehicle settings
• Drive computer information
• Drive system warnings and settings
• Cruise control system information
• NISSAN Intelligent Key® operation

information

• Indicators and warnings
• Tire pressure information
• Audio information
• Bluetooth® Hands-free Phone

information

LIC3224

VEHICLE INFORMATION DISPLAY– 7
INCH (18 cm) TYPE B (if so equipped)

2-34

Instruments and controls

• Driving Aids
• Odometer/twin trip odometer
• Distance to empty
• Clock and outside temperature

HOW TO USE THE VEHICLE
INFORMATION DISPLAY

The vehicle information display can be
changed using the

, and OK buttons located on the steer-

ing wheel.

䊊

- Use these buttons

to navigate the vehicle information
display.

䊊

OK - Change or select an item in the
vehicle information display.

䊊

— Returns to the previous menu.

The OK,

and

buttons also

control audio and control panel functions
in some conditions. Most screens and
menus offer instruction prompts of the
steering switch buttons to indicate how to
control the vehicle information display.
Dots on the right side of the vehicle infor-
mation display may appear if there is more
than one page of menu items or warning
messages, depending on the type of me-
ter. The OK button changes the audio
source and the

buttons also con-

trol voice recognition manual mode. The
OK button can be used to change the au-
dio source when the audio screen is dis-
played. The

buttons can be used

when

controlling

voice

recognition

prompts manually. For additional informa-
tion, refer to the separate NissanConnect®
Owner’s Manual.

LIC3566

Instruments and controls

2-35

STARTUP DISPLAY

When the vehicle in placed in the ON position
the vehicle information display may display
the following screens (if so equipped):
• Home
• Drive Computer — Speed, Fuel Economy,

Trip Distance & Time

• Convenience
• Digital speed and average speed
• Instant

fuel

economy/

average

fuel

economy

• Tire Pressure
• Audio/telephone
• Intelligent Cruise Control (ICC)
• Speed Limit Sign
• Driving Aids
• Settings
• Warnings*

*Warnings will only display if there are any
present. For additional information, see
“Vehicle information display warnings and
indicators” (P. 2-47).

To control what items display in the vehicle
information display, see “How to use the
vehicle information display” (P. 2-35).

2-36

Instruments and controls

1. Home

This display indicates the home screen.

2. Vehicle speed

The vehicle speed mode shows the current
vehicle speed and the average vehicle
speed since the last reset.

Average vehicle speed:

Press the OK button on the steering wheel
to bring up the drive computer Reset
menu, and follow the instructions to reset.

The average vehicle display is updated ev-
ery 30 seconds. the first 30 seconds after a
rest, the display shows “– – –’

3. Fuel economy display

Current fuel consumption:

The

current

fuel

consumption

mode

shows the current fuel consumption.

Average fuel consumption:

The average fuel consumption mode
shows the average fuel consumption since
the last reset. Press the OK button on the
steering wheel to bring up the drive com-
puter Reset menu, and follow the instruc-
tions to reset.

The display is updated every 30 seconds.
For about the first 500 m (1/3 of a mile) after
a reset, the display shows “– –.”

4. Elapsed time and trip odometer

Elapsed time:

The elapsed time shows the time since the
last reset. Press the OK button to bring up
the drive computer Reset menu, and follow
the instructions to reset.

Trip odometer:

The trip odometer shows the total dis-
tance the vehicle has been driven since the
last reset. Press the OK button on the steer-
ing wheel to bring up the drive computer
Reset menu, and follow the instructions to
reset.

5. Tire Pressures

The tire pressure mode shows the pres-
sure of all four tires while the vehicle is
driven.

When the “Tire Pressure Low — Add Air”
warning appears, the display can be
switched to the tire pressure mode by
pushing the

switch to reveal

additional

details

the

displayed

warning.

For additional information, see “Low tire
pressure warning light” (P. 2-12), “Tire Pres-
sure Monitoring System (TPMS)” (P. 5-5), “Flat
tire” (P. 6-3) and “Types of tires” (P. 8-36)

6. Traffic Sign Recognition (if so
equipped)

The Traffic Sign Recognition (TSR) system
provides the driver with information about
the most recently detected speed limit.

For additional information, see “Traffic Sign
Recognition (TSR) (P. 5-25).

7. Compass

This display indicates the direction the ve-
hicle is heading.

8. Navigation (if so equipped)

When the route guidance is set in the navi-
gation system, this item shows the naviga-
tion route information.

9. Audio

The audio mode shows the status of audio
information.

2-38

Instruments and controls

10. Driving Aids

The driving aids mode shows the operat-
ing condition for the following systems (if
so equipped):
• Forward

–– Automatic Emergency Braking (AEB)

with Pedestrian Detection system

–– Intelligent Forward Collision Warning

(I-FCW)

• Lane:

–– Lane Departure Warning (LDW)

• Blind Spot:

–– Blind Spot Warning (BSW)

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-36), “Lane Departure
Warning (LDW)” (P. 5-29), “Automatic Emer-
gency Braking (AEB) with Pedestrian Detec-
tion” (P. 5-91), or “Intelligent Forward Colli-
sion Warning (I-FCW)” (P. 5-104).

11. Intelligent Cruise Control (if so
equipped)

The Intelligent Cruise Control (ICC) mode
shows the operating condition for the ICC
system.

For additional information, see “Intelligent
Cruise Control (ICC)” (P. 5-61).

12. Warnings

The warnings mode allows the driver to
view any present warnings.

NOTE:

The warnings mode will only display if
any are present.

13. Settings

The settings mode allows the driver to view
or modify settings.

RESETTING THE DRIVE COMPUTER

The drive computer is divided across three
screens:
• Average Speed
• Average Fuel Economy
• Trip Distance & Time

1. Press the

buttons

until you reach the desired drive com-
puter mode.

2. Press and hold the OK button for ap-

proximately 1 second to reset the infor-
mation

the

currently

displayed

screen.

NOTE:

If you wish to reset all drive computer
values at once, press and hold the OK
button for approximately 3 seconds until
a reset menu appears; and follow the
instructions.

SETTINGS

The setting mode allows you to change the
information displayed in the vehicle infor-
mation display. It also allows you to change
vehicle functions:
• VDC Setting
• Driver Assistance
• ECO Mode Setting
• TPMS Setting
• Clock
• Vehicle Settings
• Maintenance
• Customize Display
• Unit/Language
• Factory Reset

Instruments and controls

2-39

VDC Setting

The VDC Setting menu allows the user to enable or disable the Vehicle Dynamic Control (VDC) system.

Menu item

Explanation

System

Allows the user turn the VDC system on or off. For additional information, see “Vehicle Dynamic Control (VDC)
system” (P. 5-128).

Driver Assistance

The driver assistance menu allows the user to change the settings for driving, parking, and braking aids.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Lane

Displays available lane options.

Lane Departure Warning

Allows user to turn the Lane Departure Warning (LDW) system on or off. For additional information, see “Lane De-
parture Warning (LDW)” (P. 5-29).

Blind Spot

Displays available blind spot options.

Blind Spot Warning

Allows user to turn the Blind Spot Warning (BSW) system on or off. For additional information, see “Blind Spot
Warning (BSW)” (P. 5-36).

Emergency Brake

Displays available emergency braking options.

Front

Rear

Allows user to turn the rear emergency braking system on or off. For additional information, see "Rear Automatic
Braking (RAB)” (P. 5-84).

Speed Limit Sign

Allows user to turn the Traffic Sign Recognition (TSR) system on or off. For additional information, see “Traffic Sign
Recognition (TSR)” (P. 5-25).

2-40

Instruments and controls

Menu item

Explanation

Parking Aids

Displays available parking aids.

Auto Show Sonar

Allows user to auto display the sonar. For additional information, see “Rear Sonar System (RSS)” (P. 5-133).

Rear

Allows user to turn the rear sonar on or off.

Distance

Allows user to set the distance sensor range to Long/Medium/Short.

Volume

Allows the user to set the parking sensor volume to High/Medium/Low.

Rear Cross Traffic Alert

Allows user to turn the Rear Cross Traffic Alert (RCTA) system on or off. For additional information, see “Rear Cross
Traffic Alert (RCTA)” (P. 5-48).

Driver Attention Alert

Allows user to turn the Intelligent Driver Alertness (I-DA) on or off. For additional information, see “Intelligent Driver
Alertness (I-DA)” (P. 5-117).

Timer Alert

Allows user to set the timer alert.

Low Temperature Alert

Allows user to turn the low temperature alert on or off.

Chassis Control

Displays available chassis control options.

ECO Mode Setting

The ECO mode setting menu allows the user to change the settings for the ECO mode.

Menu item

Explanation

ECO Mode Customize

Displays available ECO mode settings.

Cruise Control

Allows user to turn the Cruise Control mode on or off. For additional information, see “Cruise Control” (P. 5-59).

Air Conditioning

Allows user to turn the Air Conditioning mode on or off. For additional information, see “Heater and air conditioner”
(P. 4-33, 4-40).

ECO Drive Assist

Displays available ECO information settings.

ECO Indicator

Allows user to turn the ECO indicator on or off.

ECO Drive Report

Allows user to turn the ECO Drive Report on or off.

View History

Displays the history report for the vehicle.

Instruments and controls

2-41

TPMS Setting

The TPMS settings menu allows the user to view or change the tire pressure units displayed in the vehicle information display.

Menu item

Explanation

TPMS Setting

Displays available tire pressure settings.

Tire Pressure Unit

Allows user to select the tire pressure units that will display in the vehicle information display.

Clock

Menu item

Explanation

Clock

Allows user to adjust the clock settings and time within the vehicle information display. Adjustments that can
be made include manually setting the time, 12H/24H format, and time zone (if so equipped).
The clock can also be set within the center display. For additional information, refer to the separate
NissanConnect® Owner’s Manual.

Vehicle Settings

The vehicle settings allow the user to change the settings for lights, wipers, locking, keys, and other vehicle settings.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Lighting

Displays the available lighting options.

Welcome Headlight

Allows user to turn the welcome light on or off.

Auto Room Lamp

Allows user to turn the auto room lamp on or off.

Auto Headlight

Displays the auto headlight options.

Turn on earliest

Allows user to enable the turn on earliest setting.

Turn on earlier

Allows user to enable the turn on earlier setting.

Turn on standard

Allows user to enable the turn on standard setting.

Turn on later

Allows user to enable the turn on later setting.

2-42

Instruments and controls

Menu item

Explanation

Turn indicator

Displays the available turn indicator options.

3 Flashes

Allows user to turn 3 flash pass feature on or off.

Continuous

Allows user to adjust the continuous feature.

Locking

Displays the available locking options.

Ext. Door Switch

Allows user to turn the exterior door switch on or off. When turned on, the request switch on the door is acti-
vated.

Selective Unlock

Allows user to turn selective unlock on or off. When the door handle request switch on the driver’s door is
pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the
door unlock operation is performed again within 5 seconds. When the door handle request switch on the
front passenger’s door is pushed to be unlocked, all the doors will be unlocked. When this item is turned off,
all the doors will be unlocked after the door unlock operation is performed once.

Auto Door Unlock

Displays the auto door unlock options.

Shift to P

Doors will unlock when the vehicle is shifted into Park.

IGN OFF

Doors will unlock when the ignition is turned off.

OFF

Doors will have to be manually unlocked.

Horn beeps on lock

Allows user to turn answer back horn on or off. When turned on, the horn will chirp and the hazard indicators
will flash once when locking the vehicle with the Intelligent Key.

Wipers

Displays the available wiper options.

Speed Dependent

Allows user to turn wiper with speed on or off.

Rear Door Alert

Displays the available Rear Door Alert options.

Horn & Alert

When selected, the alert is displayed and horn sounds.

Alert Only

When selected, only the alert is displayed.

OFF

When selected, no alert or horn will be active.

Instruments and controls

2-43

Maintenance

The maintenance menu allows the user to set reminders for various vehicle maintenance items.

WARNING

Menu item

Explanation

Maintenance

Displays various maintenance reminder options.

Oil Control System

Allows user to reset the current interval. This should only be done after completing oil change maintenance.

Oil and Filter

Allows user to set a reminder at a specific interval or reset the current one.

Tire

Allows user to set a reminder at a specific interval or reset the current one.

Other

Allows user to set a reminder at a specific interval or reset the current one.

2-44

Instruments and controls

Customize Display

The customize display menu allows the user to customize the information that appears in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Main Menu Selection

Displays available screens that can be shown in the vehicle information display.

Home

Allows user to turn the home screen on or off in the vehicle information display.

Speed

Allows user to turn the speed screen on or off in the vehicle information display.

Blank

Allows user to turn the blank on or off in the vehicle information display.

Fuel Economy

Allows user to turn the fuel economy screen on or off in the vehicle information display.

ECO Pedal Guide

Allows user to turn the ECO Pedal guide screen on or off in the vehicle information display.

Drive Computer

Allows user to turn the drive computer screen on or off in the vehicle information display.

TPMS

Allows user to turn the TPMS screen on or off in the vehicle information display.

Speed Limit Sign

Allows user to turn the TSR screen on or off in the vehicle information display.

Audio

Allows user to turn the audio controls screen on or off in the vehicle information display.

Driving Aids

Allows user to turn the driving aids screen on or off in the vehicle information display.

Cruise

Allows user to turn the cruise control screen on or off in the vehicle information display.

Chassis Control

Allows user to turn the chassis control screen on or off in the vehicle information display.

Cruise Screen Transition

Allow user to turn the cruise screen transition on or off.

Welcome Effect

Displays the available welcome effect settings.

Gauges

Allows user to turn the gauges effect on or off.

Animation

Allows user to turn the animation effect on or off.

Light/Wiper Guidance

Displays the available light and wiper guidance settings.

Lights mode guidance

Allows user to turn the light mode guidance on or off.

Wiper mode guidance

Allows user to turn the wiper mode guidance on or off.

Instruments and controls

2-45

Unit/Language

The unit/language menu allows the user to change the units shown in the vehicle information display.

Menu item

Explanation

Mileage/Fuel

Displays the available mileage/fuel display units and allows user to select preferred unit for display.

Tire Pressure

Allows user to select the tire pressure display units.

Temperature

Allows user to select the temperature display units.

Language

Displays the available language options and allows user to select preferred language for display.

Factory Reset

The factory reset menu allows the user to restore the vehicle information display settings to factory status.

Menu item

Explanation

Factory Reset

Allows user to reset the vehicle information display settings to the original factory settings. Once selected,
the user can confirm or cancel the reset.

2-46

Instruments and controls

VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS

The following messages may appear in
your vehicle information display.

Engine start operation for
Intelligent Key system (if
I-Key battery level is low)

This indicator appears when the battery of
the Intelligent Key is low and when the In-
telligent Key system and the vehicle are not
communicating normally.

If this appears, touch the ignition switch
with the Intelligent Key while depressing
the brake pedal. For additional information,
see “NISSAN Intelligent Key® battery dis-
charge” (P. 5-13)

Key Battery Low

This indicator appears when the Intelligent
Key battery is running out of power.

If this indicator appears, replace the bat-
tery with a new one. For additional infor-
mation, see “Battery replacement” (P. 8-23).

Key ID Incorrect

This warning appears when the ignition
switch is placed from the OFF position and
the Intelligent Key is not recognized by the
system. You cannot start the engine with
an unregistered key.

For additional information, see “NISSAN In-
telligent Key®” (P. 3-6).

Key System Error: See
Owner’s Manual

After the ignition switch is placed in the ON
position, this warning appears for a period
of time and then turns off.

The Key System Error message warns of a
malfunction with the Intelligent Key sys-
tem. If the warning appears while the en-
gine is stopped, it may be impossible to
start the engine.

If the warning appears while the engine is
running, you can drive the vehicle. However,
in these cases, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.

No Key Detected

This warning appears when the Intelligent
Key is left outside the vehicle with the igni-
tion switch in the ON position. Make sure
the Intelligent Key is inside the vehicle.

For additional information, see “NISSAN In-
telligent Key®” (P. 3-6).

No Key Press and hold to
Stop Engine

This message appears when the Intelligent
key is not detected and the engine should
be turned off.

Brightness indicator

This indicator appears when the vehicle
information display screen brightness is
being adjusted.

Chassis Control System Error: See
Owner’s Manual

This warning appears if there is an error in
the Chassis Control system. Have the sys-
tem checked. It is recommended that you
visit a NISSAN dealer for this service. For
additional information, see “Chassis Con-
trol” (P. 5-131).

Instruments and controls

2-47

Rear Door Alert is activated

When the system is enabled, this message
appears when the Rear Door Alert system
is active and can remind the driver to check
the back seat.
• Using the steering wheel switch, a driver

• Using the steering wheel switch, a driver

can select “Disable Alert” to disable the
selected alert for the remainder of the
current trip.

WARNING

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-17).

For additional information, see “Rear Door
Alert” (P. 2-68).

Check Rear Seat For All Articles

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-17).

For additional information, see “Rear Door
Alert” (P. 2-68).

Door/Trunk Open

This warning appears when a door has
been opened.

Drive sport mode indicator

A small “S” appears to the right of the Trans-
mission Shift Position indicator in the ve-
hicle information display when the drive
sport mode is engaged.

Activate the drive sport mode by pushing
the switch on the shift lever while the shift
lever is in the D (Drive) position.

For additional information, see “Drive sport
mode switch” (P. 5-19)

Headlight System Error See Owner’s
Manual

This warning appears when there is an er-
ror with the system. For additional informa-
tion, see “Headlight and turn signal switch”
(P. 2-58).

Loose Fuel Cap

This warning appears when the fuel-filler
cap is not tightened correctly after the ve-
hicle has been refueled. For additional in-
formation, see “Fuel-filler cap” (P. 3-22)

2-48

Instruments and controls

Low Fuel

This warning appears when the fuel level in
the fuel tank is getting low. Refuel as soon
as it is convenient, preferably before the
fuel gauge reaches 0 (Empty).

There will be

a small reserve of fuel in the tank when
the fuel gauge needle reaches 0 (Empty).

Low Outside Temperature

Low Washer Fluid

This warning appears when the windshield-
washer fluid is at a low level. Add windshield-
washer fluid as necessary. For additional
information, see “Windshield-washer fluid”
(P. 8-12).

Power will turn off to save the battery

This message appears in the vehicle infor-
mation display after a period of time if the
ignition switch is in the AUTO ACC or the ON
position and if the vehicle is in P (Park). For
additional information, see “Push-button
ignition switch positions” (P. 5-12).

Power turned off to save the battery

This message appears after the ignition
switch is automatically turned off. For addi-
tional information, see “Push-button igni-
tion switch positions” (P. 5-12).

Push brake and start
switch to drive

This indicator appears when the shift lever
is in the P (Park) position.

This indicator also appears when the ve-
hicle has been started using the Remote
Engine Start (if so equipped) function.

This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed. You can start
the engine from any position of the ignition
switch.

Push Ignition to OFF

After the Push Ignition to OFF warning ap-
pears, the warning will appear if the ignition
switch is placed in the AUTO ACC position
when the shift lever is moved to the P (Park)
position.

To turn off the Push warning, place the ig-
nition switch in the ON position and then in
the LOCK position.

Rear seat belt reminder

This warning appears for 35 seconds after
the ignition is placed in the ON position and
the engine is started.

After a change in buckle status, a chime will
sound and the warning will appear for an-
other 35 seconds.

Release Parking Brake

This warning appears when the parking
brake is set and the vehicle is driven.

Reminder: Turn
OFF Headlights

Instruments and controls

2-49

Rotate Steering Wheel and
Push Start Switch

This indicator appears when the steering
lock cannot be released.

If this indicator appears, push the ignition
switch while lightly turning the steering
wheel right and left.

Shift to Park

If this warning appears, move the shift lever
to the P (Park) position and start the engine.

Shipping Mode On Push Storage Fuse

Timer Alert — Time for a
break?

This indicator appears when the set time is
reached. The time can be set up to six
hours. For additional information, see “Set-
tings” (P. 2-39).

Tire Pressure Low - Add Air

Transmission Shift Position
indicator

This indicator shows the transmission shift
position.

CVT hot Power reduced

automatically

reduce

the

chance of transmission damage. Vehicle
speed can be controlled with the accelera-
tor pedal, but the engine and vehicle speed
may be reduced.

WARNING

2-50

Instruments and controls

CVT Malfunction Service
now

This warning appears when there is a
problem with the CVT system. If this
warning comes on, have the system
checked. It is recommended that you visit a
NISSAN dealer for this service.

Engine hot Power reduced

This engine has a high fluid temperature
protection mode. If the fluid temperature
becomes too high (for example, climbing
steep grades in high temperatures with
heavy loads, such as when towing a trailer),
engine power and, under some conditions,
vehicle speed will be decreased automati-
cally to reduce the chance of engine dam-
age. Vehicle speed can be controlled with
the accelerator pedal, but the engine and
vehicle speed may be reduced.

WARNING

to the side of the road at a safe place
and allow the engine to return to nor-
mal operation; or have it repaired if
necessary.

Engine Malfunction: Power Reduced
Service now

This warning appears when the engine is
not operating under normal conditions. If
this warning comes on, have the system
checked. It is recommended that you visit a
NISSAN dealer for this service.

Engine Malfunction Service now

This warning appears when there is a
problem with the engine. If this warning
appears, have the system checked. It is rec-
ommended that you visit a NISSAN dealer
for this service.

Engine Oil Service due
in – – – miles

This distance to oil change is displayed if
the distance to oil change is less than
62 miles (100 km).

Engine Stalled: Stop safely

This message appears 30 seconds before
the vehicle is shut down due to an above
normal operating exhaust temperature.
The Malfunction Indicator Light (MIL) and
malfunction warning (red) will illuminate.

Have the system checked. It is recom-
mended that you visit a NISSAN dealer im-
mediately for this service.

Automatic Emergency
Braking with Pedestrian
Detection warning
indicator

This indicator appears along, with an au-
dible warning, when the system detects
the possibility of a forward collision.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-91) and “Intelligent Forward
Collision Warning (I-FCW)” (P. 5-104).

BSW/RCTA indicator

This indicator appears when the BSW sys-
tem is engaged.

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-36).

Currently not available

This message may appear when the Intel-
ligent

Cruise

Control

(ICC)

system

engaged.

Under the following conditions, the ICC sys-
tem is automatically canceled:
• When the VDC system is turned off

Instruments and controls

2-51

The above system cannot be used in some
situations (VDC operates, wheel slip and
VDC system is off.)

Driver Attention Alert
Malfunction

This warning appears when the Intelligent
Driver Alertness system is not functioning
properly. For additional information, see “In-
telligent Driver Alertness (I-DA)” (P. 5-117).

Driver Attention Alert—
Take a Break?

This alert appears when the system has
detected that the driver may be displaying
fatigue or a lack of attention.

Forward Driving Aids Temporarily
Disabled Front Sensor Blocked See
Owner’s Manual

This message appears when the front ra-
dar sensor may be obstructed due to:
• mud, dirt, snow, ice, etc.
• inclement weather (rain, fog, snow, etc.)

All forward driving aids are temporarily dis-
abled until the system detects that the
front radar sensor is no longer obstructed.

For additional information, see the follow-
ing (if so equipped):
• Automatic Emergency Braking (AEB) with

Pedestrian Detection (P. 5-91)

• Intelligent Cruise Control (ICC) (P. 5-61)
• Intelligent Forward Collision Warning (I-

FCW) (P. 5-104)

Idling Stop System

This indicator shows the Idling Stop Sys-
tem status.

For addition information, see “Idling Stop
System” (P. 5-138).

Intelligent Cruise Control
(ICC) indicators

These

indicators

show

the

Intelligent

Cruise Control (ICC) system status. The sta-
tus is shown by color. For additional infor-
mation, see “Intelligent Cruise Control (ICC)”
(P. 5-61).

Lane Departure Warning
(LDW) indicator

This indicator appears when the LDW sys-
tem is engaged.

For additional information, see “Lane De-
parture Warning (LDW)” (P. 5-29).

Malfunction

This warning appears when the Automatic
Emergency Braking with Pedestrian Detec-
tion system or Intelligent Forward Collision
Warning (I-FCW) system is not functioning
properly.

If one or more of these warnings appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-91) or “Intelligent Forward
Collision Warning (I-FCW)” (P. 5-104).

Malfunction: See Owner’s Manual

This warning appears when one or more of
the following systems are not functioning
properly:
• Blind Spot Warning (BSW)
• Rear Cross Traffic Alert (RCTA)

If one or more of these warnings appear,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

2-52

Instruments and controls

Not Available Poor Road Conditions

This message may appear when the Intelli-
gent Cruise Control (ICC) system is engaged.

Under the following conditions, the ICC sys-
tem is automatically canceled:
• When the VDC operates
• When a wheel slips

The above system cannot be used in some
situations (VDC operates and wheel slip).

Not Available System Malfunction

This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly.
• Intelligent Cruise Control (ICC)
• Blind Spot Warning (BSW)
• Lane Departure Warning (LDW)
• Rear Automatic Braking (RAB)

If one or more of these warnings appear,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

For additional information, see "Intelligent
Cruise Control (ICC)” (P. 5-61), “Blind Spot
Warning (BSW)” (P. 5-36), “Lane Departure
Warning (LDW)” (P. 5-29), or “Rear Automatic
Braking (RAB)” (P. 5-84)..

Parking Sensor Error: See Owner’s
Manual

This warning appears when there is an er-
ror with the system. For additional informa-
tion, see “Rear Sonar System (RSS)” (P. 5-133).

Rear Automatic Braking
(RAB) system warning
indicator

This indicator appears to indicate the sta-
tus of the Rear Automatic Braking (RAB)
system. For additional information, see
“Rear Automatic Braking (RAB)” (P. 5-84).

Speed Limit Sign indicator

This message may appear when the Traffic
Sign Recognition system is engaged.

For additional information, see “Traffic Sign
Recognition (TSR)” (P. 5-25).

Unavailable: High Cabin Temperature

This message appears when the camera
detects an interior temperature of more
than approximately 104°F (40°C). For addi-
tional information, see “Traffic Sign Recog-
nition (TSR)” (P. 5-25).

Unavailable: High Camera
Temperature

This message appears when the camera
detects an interior temperature of more
than 104°F (40°C). For additional informa-
tion, see “Traffic Sign Recognition (TSR)”
(P. 5-25).

Unavailable: Side Radar Obstruction

This message appears when the Blind
Spot Warning (BSW)/Rear Cross Traffic Alert
(RCTA) systems become unavailable be-
cause a radar blockage is detected. For
additional information, see “Blind Spot
Warning (BSW)” (P. 5-36) or “Rear Cross Traf-
fic Alert (RCTA)” (P. 5-48).

Vehicle ahead detection
indicator

This indicator appears when the following
systems are engaged and have detected a
vehicle:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Intelligent

Forward

Collision

Warning

(I-FCW)

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-91) and “Intelligent Forward
Collision Warning (I-FCW)” (P. 5-104).

Instruments and controls

2-53

Nissan Sentra (2024 year). Manual in english - page 4