Nissan Altima (2024 year). Manual in english

Charge warning light

If this light comes on while the engine is
running, it may indicate the charging sys-
tem is not functioning properly. Turn the
engine off and check the generator belt. If
the belt is loose, broken, or missing, or if the
light remains on, have the system checked.
It is recommended that you visit a NISSAN
dealer for this service.

CAUTION

•

Do not ground electrical accessories
directly to the battery terminal. Do-
ing so will bypass the variable volt-
age control system and the vehicle
battery may not charge completely.
For additional information, see “Vari-
able voltage control system” (P. 8-16).

•

Do not continue driving if the genera-
tor belt is loose, broken or missing.

Electronic parking
brake indicator
light (if so
equipped)

This light illuminates when the electronic
parking brake system is operating.

When the ignition switch is placed in the
ON position, the electronic parking brake
warning light illuminates. When the engine
is started and the parking brake is released,
the warning light turns off.

If the parking brake is not released, the
electronic parking brake warning light re-
mains illuminated. Ensure the electronic
parking brake warning light has turned off
before driving.

If the electronic parking brake warning
light illuminates or flashes while the elec-
tronic parking brake system warning light

(yellow) illuminates, it may indicate

that the electronic parking brake system is
not functioning properly. Have the system
checked. It is recommended that you visit a
NISSAN dealer for this service.

For additional information, see “Parking
brake” (P. 5-24).

Engine oil pressure
warning light

This light warns of low engine oil pressure.
If the light flickers or comes on during nor-
mal driving, pull off the road in a safe area,
stop the engine

immediately

and call a

NISSAN dealer or other authorized repair
shop.

The engine oil pressure warning light is
not designed to indicate a low oil level.

Use the dipstick to check the oil level. For
additional information, see “Engine oil” (P. 8-7).

CAUTION

Running the engine with the engine oil
pressure warning light on could cause
serious damage to the engine almost
immediately. Such damage is not cov-
ered by the NISSAN New Vehicle Limited
Warranty. Turn off the engine as soon
as it is safe to do so.

2-12

Instruments and controls

Master warning light

When the ignition is in the ON position, the
master warning light illuminates if any of
the following are displayed on the vehicle
information display.
• Parking brake release warning
• Door open warning (while moving)
• Steering Alert hands on detection warning

The warning(s) remain on the vehicle infor-
mation display until action is taken, or the
ignition is placed in the OFF position.

Seat belt warning light and
chime

• The light and chime remind you to fasten

the seat belts.

• The seat belt warning light will illuminate

when the ignition switch is pushed to the
ON position if the driver’s seat belt is not
fastened, or if the front passenger seat
belt is not fastened when occupied.

• If the driver’s seat belt is not fastened

when the ignition switch is pushed to the
ON position, the chime will sound shortly.

• If the vehicle is driven above 9 mph (15

km/h) in the conditions that illuminate
the seat belt warning light, the lamp will
begin to blink and the chime will sound
for over one minute, or until the seat belt
is fastened again.

NOTE:

•

The warning light and/or chime may
activate if an object is placed in the un-
occupied front passenger seat. In this
case, please remove the object from
the front passenger seat.

•

The warning light and/or chime may
activate if any seat belt is unfastened
before the vehicle comes to a complete
stop. Please remain fastened until the
vehicle has come to a complete stop.

Security indicator light

This light blinks when the ignition switch is
placed in the OFF, LOCK or AUTO ACC
position.

The blinking security indicator light indi-
cates that the security systems equipped
on the vehicle are operational.

For additional information, see “Security
systems” (P. 2-60).

Supplemental air bag
warning light

When the ignition switch is placed in the ON
or START position, the supplemental air
bag warning light illuminates for about 7
seconds and then turns off. This means the
system is operational.

If any of the following conditions occur, the
front air bag, side air bag, curtain air bag,
and pretensioner systems need servicing
and your vehicle must be taken to a NISSAN
dealer:
• The supplemental air bag warning light re-

mains on after approximately 7 seconds.

• The supplemental air bag warning light

flashes intermittently.

• The supplemental air bag warning light

does not come on at all.

Unless checked and repaired, the supple-
mental restraint system (air bag system)
and/or the pretensioners may not function
properly. For additional details, see “Supple-
mental Restraint System (SRS)” (P. 1-44).

Instruments and controls

2-13

WARNING

If the supplemental air bag warning
light is on, it could mean that the front
air bag, side air bag, curtain air bag sys-
tems and/or pretensioner systems will
not operate in an accident. To help
avoid injury to yourself or others, have
your vehicle checked as soon as pos-
sible. It is recommended that you visit a
NISSAN dealer for this service.

WARNING/INDICATOR LIGHTS
(yellow)

For additional information on warnings
and indicators, see “Vehicle information
display-5 inch (13 cm) Type A” (P. 2-20) or
“Vehicle information display-7 inch (18 cm)
Type B” (P. 2-39).

Anti-lock Braking
System (ABS)
warning light

When the ignition switch is placed in the ON
position, the ABS warning light illuminates
and then turns off. This indicates the ABS is
operational.

If the ABS warning light illuminates while
the engine is running or while driving, it
may indicate the ABS is not functioning
properly. Have the system checked. It is
recommended that you visit a NISSAN
dealer for this service.

If an ABS malfunction occurs, the anti-lock
function is turned off. The brake system
then operates normally but without anti-
lock assistance. For additional information,
see “Brake system” (P. 5-148).

Automatic Emergency
Braking (AEB) with
Pedestrian Detection
system warning light

This light comes on when the ignition
switch is placed in the ON position. It turns
off after the engine is started.

This light illuminates when the AEB with
Pedestrian Detection system is set to OFF
in the vehicle information display.

If the light illuminates when the AEB with
Pedestrian Detection system is on, it may
indicate that the system is unavailable. For
additional

information, see

“Automatic

Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-109) and “Intelligent For-
ward Collision Warning (I-FCW)” (P. 5-123).

Electronic
parking brake
warning light
(if so equipped)

The

electronic

parking

brake

system

warning light functions for the electronic
parking brake system. If the warning light
illuminates, it may indicate the electronic
parking brake system is not functioning
properly. Have the system checked. It is
recommended that you visit a NISSAN
dealer for this service.

For additional information, see “Parking
brake” (P. 5-24).

Front passenger air bag
status light

The front passenger air bag status light will
be lit and the passenger front air bag will be
off depending on how the front passenger
seat is being used.

For additional information, see “Front pas-
senger air bag and status light” (P. 1-55).

2-14

Instruments and controls

Low tire pressure warning
light

Your vehicle is equipped with a Tire Pres-
sure Monitoring System (TPMS) that moni-
tors the tire pressure of all tires except the
spare.

The low tire pressure warning light warns
of low tire pressure or indicates that the
TPMS is not functioning properly.

After the ignition switch is placed in the ON
position, this light illuminates for about 1
second and turns off.

Low tire pressure warning

If the vehicle is being driven with low tire
pressure, the warning light will illumi-
nate. A “Tire Pressure Low - Add Air”
warning also appears in the vehicle in-
formation display.

When the low tire pressure warning light
illuminates, you should stop and adjust
the tire pressure of all four tires to the
recommended COLD tire pressure shown
on the Tire and Loading Information la-
bel located in the driver's door opening.
The low tire pressure warning light does
not automatically turn off when the tire
pressure is adjusted. After the tire is in-

flated to the recommended pressure,
the vehicle must be driven at speeds
above 16 mph (25 km/h) to activate the
TPMS and turn off the low tire pressure
warning light. Use a tire pressure gauge
to check the tire pressure.

The “Tire Pressure Low - Add Air” warning
appears each time the ignition switch is
placed in the ON position as long as the
low tire pressure warning light remains
illuminated.

For additional information, see “Vehicle in-
formation display — 7 inch (18 cm) Type B”
(P. 2-39), and “Tire Pressure Monitoring Sys-
tem (TPMS)” (P. 5-5) and (P. 6-3).

TPMS malfunction

If the TPMS is not functioning properly, the
low tire pressure warning light will flash for
approximately 1 minute when the ignition
switch is placed in the ON position. The
light will remain on after 1 minute. Have the
system checked. It is recommended that
you visit a NISSAN dealer for this service.
The "Tire Pressure Low — Add Air" warning
does not appear if the low tire pressure
warning light illuminates to indicate a
TPMS malfunction.

For additional information, see “Tire Pres-
sure Monitoring System (TPMS)” (P. 5-5) and
(P. 6-3).

WARNING

•

Radio waves could adversely affect
electric medical equipment. Those
who use a pacemaker should contact
the

electric

medical

equipment

manufacturer for the possible influ-
ences before use.

•

If the light does not illuminate with
the ignition switch placed in the ON
position, have the vehicle checked as
soon as possible. It is recommended
that you visit a NISSAN dealer for this
service.

Instruments and controls

2-15

•

If the light illuminates while driving,
avoid sudden steering maneuvers
or abrupt braking, reduce vehicle
speed, pull off the road to a safe loca-
tion and stop the vehicle as soon as
possible. Driving with under-inflated
tires may permanently damage the
tires and increase the likelihood of
tire failure. Serious vehicle damage
could occur and may lead to an acci-
dent and could result in serious per-
sonal injury or death. Check the tire
pressure for all four tires. Adjust the
tire pressure to the recommended
COLD tire pressure shown on the Tire
and Loading Information label lo-
cated in the driver’s door opening to
turn the low tire pressure warning
light off. If the light still illuminates
while driving after adjusting the tire
pressure, a tire may be flat or the
TPMS may be malfunctioning. If you
have a flat tire, replace it with a spare
tire as soon as possible. If no tire is
flat and all tires are properly inflated,
have the vehicle checked. It is recom-
mended that you visit a NISSAN
dealer for this service.

•

When using a wheel without the
TPMS such as the spare tire, the TPMS
will not function and the low tire
pressure warning light will flash for
approximately 1 minute. The light will
remain on after 1 minute. Have your
tires replaced and/or TPMS system
reset as soon as possible. It is recom-
mended that you visit a NISSAN
dealer for these services.

•

Replacing tires with those not origi-
nally specified by NISSAN could af-
fect the proper operation of the
TPMS.

CAUTION

•

The TPMS is not a substitute for the
regular tire pressure check. Be sure
to check the tire pressure regularly.

•

If the vehicle is being driven at
speeds of less than 16 mph (25 km/h),
the TPMS may not operate correctly.

•

Be sure to install the specified size of
tires to the four wheels correctly.

Malfunction Indicator Light
(MIL)

If this indicator light comes on steady or
blinks while the engine is running, it may
indicate

potential

emission

control

malfunction.

The MIL may also come on steady if the
fuel-filler cap is loose or missing, or if the
vehicle runs out of fuel. Check to make sure
the fuel-filler cap is installed and closed
tightly, and that the vehicle has at least
3 gallons (11.4 liters) of fuel in the fuel tank.

After a few driving trips, the

light

should turn off if no other potential emis-
sion control system malfunction exists.

If this indicator light comes on steady for 20
seconds and then blinks for 10 seconds
when the engine is not running, it indicates
that the vehicle is not ready for an emission
control system inspection/maintenance
test. For additional information, see “Readi-
ness for Inspection/Maintenance (I/M) test”
(P. 10-23).

2-16

Instruments and controls

Operation

The MIL will come on in one of two ways:
• MIL on steady — An emission control sys-

tem malfunction has been detected.
Check the fuel-filler cap if the Loose Fuel
Cap warning appears in the vehicle infor-
mation display. If the fuel-filler cap is loose
or missing, tighten or install the cap and
continue to drive the vehicle. The

light

should turn off after a few driving trips. If
the

light does not turn off after a few

driving trips, have the vehicle inspected. It is
recommended that you visit a NISSAN
dealer for this service. You do not need to
have your vehicle towed to the dealer.

• MIL blinking — An engine misfire has been

detected which may damage the emis-
sion control system. To reduce or avoid
emission control system damage:

– do not drive at speeds above 45 mph

(72 km/h).

– avoid hard acceleration or deceleration.
– avoid steep uphill grades.
– if possible, reduce the amount of cargo

being hauled or towed.

The MIL may stop blinking and come on
steady. Have the vehicle inspected. It is rec-
ommended that you visit a NISSAN dealer
for this service. You do not need to have
your vehicle towed to the dealer.

CAUTION

Continued vehicle operation without
having the emission control system
checked and repaired as necessary
could lead to poor driveability, reduced
fuel economy, and possible damage to
the emission control system.

Master warning light

When the ignition is in the ON position, the
master warning light illuminates if any of
the following are displayed on the vehicle
information display.
• No key warning
• Low windshield-washer fluid warning
• Door open warning (when stopped)
• Trunk open warning
• Loose fuel cap
• Low tire pressure warning
• AWD warning (if so equipped)

If the master warning light illuminates and
the message(s) are not visible on the ve-
hicle information display, use the buttons
located on the steering wheel to navigate
the vehicle information display until the
“Warnings” screen is displayed.

Power steering warning
light

WARNING

•

If the engine is not running or is
turned off while driving, the power
assist for the steering will not work.
Steering will be harder to operate.

•

When the power steering warning
light illuminates with the engine run-
ning, there will be no power assist for
the steering. You will still have control
of the vehicle, but the steering will be
harder to operate. Have the power
steering system checked. It is recom-
mended that you visit a NISSAN
dealer for this service.

When the ignition switch is placed in the ON
position, the power steering warning light
illuminates. After starting the engine, the
power steering warning light turns off. This
indicates the power steering is operational.

If the power steering warning light illumi-
nates while the engine is running, it may
indicate the power steering is not function-
ing properly and may need servicing. Have
the power steering checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

Instruments and controls

2-17

When the power steering warning light illu-
minates with the engine running, there will
be no power assist for the steering, but you
will still have control of the vehicle. At this
time, greater steering effort is required to
operate the steering wheel, especially in
sharp turns and at low speeds.

For additional information, see “Power
steering” (P. 5-148).

Rear Automatic Braking
(RAB) system warning light

This light comes on when the ignition
switch is placed in the ON position. It turns
off after the engine is started.

This light illuminates when the RAB system is
turned off in the vehicle information display.

If the light illuminates when the RAB sys-
tem is on, it may indicate that the system is
unavailable. For additional information, see
“Rear Automatic Braking (RAB)” (P. 5-102).

Slip indicator light

This indicator light will blink when the Ve-
hicle Dynamic Control (VDC) system is op-
erating, thus alerting the driver to the fact
that the road surface is slippery and the
vehicle is nearing its traction limits.

You may feel or hear the system working;
this is normal.

The light will blink for a few seconds after
the VDC system stops limiting wheel spin.

The

indicator light also comes on

when you place the ignition switch in the
ON position. The light will turn off after ap-
proximately 2 seconds if the system is op-
erational. If the light does not come on
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

Vehicle Dynamic Control
(VDC) OFF indicator light

This indicator light comes on when the
VDC is turned off in the vehicle information
display. This indicates the VDC has been
turned off.

Turn the VDC on using the vehicle informa-
tion display, or by restarting the engine. For
additional information, see “Vehicle Dy-
namic Control (VDC) system” (P. 5-151).

The VDC light also comes on when the ig-
nition switch is placed in the ON position.
The light will turn off after a period of time if
the system is operational. If the light stays
on or comes on along with the

indica-

tor light while you are driving, have the VDC

system checked. It is recommended that
you visit a NISSAN dealer for this service.

WARNING

VDC should remain on unless freeing a
vehicle from mud or snow.

While the VDC system is operating, you
might feel a slight vibration or hear the sys-
tem working when starting the vehicle or
accelerating, but this is normal.

WARNING/INDICATOR LIGHTS
(other)

For additional information on warnings
and indicators, see “Vehicle information
display-5 inch (13 cm) Type A” (P. 2-20) or
“Vehicle information display 7 inch (18 cm)
Type B” (P. 2-39).

Automatic brake hold
indicator light (white/green)
(if so equipped)

The automatic brake hold indicator light
(white) illuminates when the automatic
brake hold system is on standby.

The automatic brake hold indicator light
(green) illuminates when the automatic
brake hold system is operating.

2-18

Instruments and controls

For additional information, see “Automatic
brake hold” (P. 5-26).

High Beam Assist indicator
light (green)

This indicator light illuminates when the
headlights come on while the headlight
switch is in the AUTO position with the high
beams selected. This indicates that the
high beam assist is operational.

For additional information, see “Headlight
and turn signal switch” (P. 2-64).

High beam indicator light
(blue)

This blue light comes on when the head-
light high beams are on and goes out when
the low beams are selected.

The high beam indicator light also comes
on when the passing signal is activated.

Side light and headlight
indicator light (green)

The side light and headlight indicator light
illuminates when the side light or headlight
position is selected. For additional informa-
tion, see “Headlight and turn signal switch”
(P. 2-64).

Turn signal/hazard
indicator lights (green)

The appropriate light flashes when the turn
signal switch is activated.

Both lights flash when the hazard switch is
turned on.

AUDIBLE REMINDERS

Brake pad wear warning

The disc brake pads have audible wear
warnings. When a disc brake pad requires
replacement, it makes a high pitched
scraping sound when the vehicle is in mo-
tion, whether or not the brake pedal is de-
pressed. Have the brakes checked as soon
as possible if the warning sound is heard.

Light reminder chime

With the ignition switch placed in the OFF
position, a chime sounds when the driver's
door is opened if the headlights or parking
lights are on.

Turn the headlight control switch off before
leaving the vehicle.

NISSAN Intelligent Key® door
buzzer

The Intelligent Key door buzzer sounds if
the Intelligent Key is left inside the vehicle
when locking the doors. When the buzzer
sounds, be sure to check both the vehicle
and the Intelligent Key. For additional infor-
mation, see “NISSAN Intelligent Key®” (P. 3-2).

Instruments and controls

2-19

The vehicle information display is located
to the left of the speedometer. It displays
such items as:
• Vehicle settings
• Indicators and warnings
• Information/warning messages
• Tire pressure information
• Drive computer information
• Cruise control system information
• Driving Aids (if so equipped)
• NISSAN Intelligent Key® operation

information

• Audio information

• Shift position
• Distance to empty
• Odometer/twin trip odometer
• Clock and outside temperature

HOW TO USE THE VEHICLE
INFORMATION DISPLAY

The vehicle information display can be
changed using the

, and OK buttons located on the steer-

ing wheel.

䊊

- Use these buttons

to navigate the vehicle information
display.

䊊

OK - Change or select an item in the
vehicle information display.

䊊

— Returns to the previous menu.

LIC2630

LIC3566

VEHICLE INFORMATION DISPLAY- 5
INCH (13 cm) TYPE A (if so equipped)

2-20

Instruments and controls

The OK,

and

buttons also

buttons also control voice

recognition manual mode. The OK button
can be used to change the audio source
when the audio screen is displayed. The

buttons can be used when con-

trolling voice recognition prompts manu-
ally. For additional information, refer to the
separate NissanConnect® Owner’s Manual.

STARTUP DISPLAY

When the vehicle in placed in the ON position
the vehicle information display may display
the following screens (if so equipped):
• Drive Computer — Speed, Trip Distance &

Time, Fuel Economy

• Audio
• Driving Aids
• Tire Pressure
• Settings
• Warnings*

*Warnings will only display if there are any
present. For additional information, see
“Vehicle information display warnings and
indicators” (P. 2-32).

To control what items display in the vehicle
information display, see “How to use the
vehicle information display” (P. 2-20).

Instruments and controls

2-21

1. Vehicle speed

The vehicle speed mode shows the current
vehicle speed and the average vehicle
speed since the last reset.

Average vehicle speed:

Press the OK button on the steering wheel
to bring up the drive computer Reset
menu, and follow the instructions to reset.

For additional information, see “Resetting
the drive computer” (P. 2-24).

The average vehicle display is updated ev-
ery 30 seconds. the first 30 seconds after a
rest, the display shows “– – –’

2. Elapsed time and trip odometer

Elapsed time:

The elapsed time shows the time since the
last reset. Press the OK button to bring up
the drive computer Reset menu, and follow
the instructions to reset.

For additional information, see “Resetting
the drive computer” (P. 2-24).

Trip odometer:

The trip odometer shows the total dis-
tance the vehicle has been driven since the
last reset. Press the OK button on the steer-

ing wheel to bring up the drive computer
Reset menu, and follow the instructions to
reset.

For additional information, see “Resetting
the drive computer” (P. 2-24).

3. Fuel economy display

Current fuel consumption:

The

current

fuel

consumption

mode

shows the current fuel consumption.

Average fuel consumption:

The average fuel consumption mode
shows the average fuel consumption since
the last reset. Press the OK button on the
steering wheel to bring up the drive com-
puter Reset menu, and follow the instruc-
tions to reset.

For additional information, see “Resetting
the drive computer” (P. 2-24).

The display is updated every 30 seconds.
For about the first 1/3 of a mile (500 m) after
a reset, the display shows “– –.”

4. Audio

The audio mode shows the status of audio
information.

5. Driving Aids

The driving aids mode shows the operat-
ing condition for the following systems (if
so equipped):
• Forward

–– Automatic Emergency Braking (AEB)

with Pedestrian Detection system

–– Intelligent Forward Collision Warning

(I-FCW)

• Lane:

–– Lane Departure Warning (LDW)

• Blind Spot:

–– Blind Spot Warning (BSW)

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-45), “Lane Departure
Warning (LDW)” (P. 5-32), “Automatic Emer-
gency Braking (AEB) with Pedestrian Detec-
tion” (P. 5-109), or “Intelligent Forward Colli-
sion Warning (I-FCW)” (P. 5-123).

6. Tire Pressures

The tire pressure mode shows the pressure
of all four tires while the vehicle is driven.

When the “Tire Pressure Low — Add Air”
warning appears, the display can be
switched to the tire pressure mode by
pressing the OK button to reveal additional
details on the displayed warning.

Instruments and controls

2-23

For additional information, see “Low tire
pressure warning light” (P. 2-15), “Tire Pres-
sure Monitoring System (TPMS)” (P. 5-5), “Flat
tire” (P. 6-3) and “Types of tires” (P. 8-36)

7. Warnings

The warnings mode allows the driver to
view any present warnings.

NOTE:

The warnings mode will only display if
any are present.

8. Settings

The settings mode allows the driver to view
or modify settings.

RESETTING THE DRIVE COMPUTER

The drive computer is divided across three
screens:
• Speed
• Trip Distance & Time
• Fuel Economy

1. Press the

buttons until the

desired

drive

computer

screen

displayed.

2. Press the OK button to bring up the drive

computer Reset menu.

3. Use the

to select the de-

sired option. Then press the OK button:

• “Cancel” — returns to the previous screen

without resetting the trip computer.

• Drive computer value — resets only the

displayed drive computer value.

– “Average Speed” - resets the average

speed of the selected drive computer
screen.

– “Distance & Time” - resets the distance

and time of the selected drive com-
puter screen.

– “Fuel

Economy”

resets

the

fuel

economy of the selected drive com-
puter screen.

• “All” — resets all linked drive computer val-

ues. This includes distance & time, aver-
age fuel economy and average speed
information.

OIL CONTROL SYSTEM (if so
equipped)

The oil control system can be accessed in
the Maintenance portion of the vehicle in-
formation display settings.

Engine oil information informs the distance
to oil change. Never exceed one year or
7,500 miles (12,000 km) between oil change
intervals for the 2.0L 4 cylinder (KR20DDET

engine model) or 10,000 miles (16,000 km)
between oil change intervals for the 2.5L 4
cylinder (PR25DD engine model).

Display when
ignition is ON

Display timing

Action
Required

Engine Oil
Service due in
xxx kilometers

Remaining oil
life is less than
940 miles
(1500 km).

Plan to have
your vehicle
serviced.

Service due
now

Remaining oil
life is 0 miles
(0 km).

Have your ve-
hicle serviced
within two
weeks or less
than 500 miles
(800 km).

The oil change interval cannot be adjusted
manually.

The distance to oil change interval is calcu-
lated depending on the driving conditions
and set automatically by the oil control sys-
tem. A reminder will be displayed when ap-
proaching the end of the service interval.

When the Factory Reset option is selected
in the vehicle information display, the oil
control system will also be reset to initial
value. Please change the engine oil when
Factory Reset is selected.

2-24

Instruments and controls

CAUTION

If the oil replacement indicator is dis-
played, change the engine oil within
two weeks or less than 500 miles (800
km).

Operating the vehicle with deteriorated
oil can damage the engine.

To reset oil control system:

1. Place the ignition switch in the ON

position.

2. Press the

and

buttons located

on the steering wheel until “Settings” dis-
plays in the vehicle information display.
Use

to select “Maintenance”.

Then, press the OK button.

3. Select “Oil Control System” and press the

OK button.

4. Press the OK button according to the

reset instructions displayed at the bot-
tom of the “Oil Control System” mainte-
nance screen.

5. For additional information, refer to the

separate maintenance booklet.

SETTINGS

The setting mode allows you to change the
information displayed in the vehicle infor-
mation display. It also allows you to change
vehicle functions:
• VDC
• Driver Assistance
• Clock
• Meter Settings
• Vehicle Settings
• Maintenance
• Alarm
• Tire Pressures
• Unit
• Language
• Factory Reset

VDC

The VDC Setting menu allows the user to enable or disable the Vehicle Dynamic Control (VDC) system.

Menu item

Explanation

VDC

Allows the user turn the VDC system on or off. For additional information, see “Vehicle Dynamic Control (VDC) system”
(P. 5-151).

Instruments and controls

2-25

Driver Assistance

The driver assistance menu allows the user to change the settings for driving, parking, and braking aids.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Driving Aids

Displays available driving aids.

Emergency Brake

Displays available emergency brake options.

Front

Allows the user to turn the emergency braking system on or off. For additional information, see “Automatic Emer-
gency Braking (AEB) with Pedestrian Detection ” (P. 5-109) and “Intelligent Forward Collision Warning (I-FCW)”
(P. 5-123).

Rear

Allows the user to turn the rear emergency braking system on or off. For additional information, see “Rear Auto-
matic Braking (RAB)” (P. 5-102).

Lane

Displays available lane options.

Lane (LDW)

Allows the user to turn the Lane Departure Warning (LDW) system on or off. For additional information, see “Lane
Departure Warning (LDW)” (P. 5-32).

Blind Spot

Displays available emergency brake options.

Blind Spot (BSW)

Allows the user to turn the Blind Spot Warning (BSW) system on or off. For additional information, see “Blind Spot
Warning (BSW) ” (P. 5-45).

Indicator Brightness

Allows user to change the brightness of the side indicator.

Driver Attention

Allows user to turn the Intelligent Driver Alertness on or off. For additional information, see “Intelligent Driver Alert-
ness” (P. 5-138).

Parking Aids

Displays available parking aids.

Cross Traffic

Allows user to turn the Rear Cross Traffic Alert (RCTA) system on or off. For additional information, see “ Rear Cross
Traffic Alert (RCTA)” (P. 5-57).

Rear Sensor

Allows user to turn the rear sonar on or off.

Display

Allows user to turn the display on or off.

Volume

Allows the user to set the parking sensor volume to High/Med./Low.

Range

Allows user to set the distance sensor range to Far/Mid./Near.

Chassis Control

Displays available chassis control options.

Trace Control

Allows user to turn the Intelligent Trace Control system on or off. For additional information, see “ Intelligent Trace
Control (I-TC)” (P. 5-153).

2-26

Instruments and controls

Clock

Menu item

Explanation

Clock

Allows user to adjust the clock settings and time within the vehicle information display. Adjustments that can
be made include manually setting the time, 12H/24H format, Daylight Saving Time, and time zone.
The clock can also be set within the center display. For additional information, refer to the separate
NissanConnect® Owner’s Manual.

Meter Settings

The meter settings menu allows the user to customize the information that appears in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Main Menu Selection

Displays available screens that can be shown in the vehicle information display.

Speed

Allows user to turn the speedometer screen on or off in the vehicle information display.

Trip

Allows user to turn the trip computer on or off in the vehicle information display.

Fuel Economy

Allows user to turn the fuel economy screen on or off in the vehicle information display.

Audio

Allows user to turn the audio controls screen on or off in the vehicle information display.

Driving Aids

Allows user to turn the driving aids screen on or off in the vehicle information display.

Tire pressures

Allows user to turn the tire pressure screen on or off in the vehicle information display.

Welcome Effect

Displays the available welcome effect settings.

Dial Effect

Allows user to turn the dial effect on or off.

Display Effect

Allows user to turn the display effect on or off.

Light/Wiper

Displays the available light and wiper guidance settings.

Light Guidance

Allows user to turn the light mode guidance on or off.

Wiper Guidance

Allows user to turn the wiper mode guidance on or off.

Instruments and controls

2-27

Vehicle Settings

The vehicle settings allow the user to change the settings for lights, wipers, locking, keys, and other vehicle settings.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Lighting

Displays the available lighting options.

Welcome Light

Allows user to turn the welcome light on or off.

Auto Room Lamp

Allows user to turn the interior light timer on or off.

Light Sensitivity

Allows user to change when the auto lights activate based on exterior brightness.

Light Off Delay

Allows user to change the length of time the exterior lights remain on.

Turn indicator

Displays the available turn indicator options.

3 Flash Pass

Allows user to turn the 3 flash pass on or off.

Locking

Displays the available locking options.

I-Key Door Lock

Allows the user to turn the I-Key door lock on or off. When on, the request switch on the door is activated.

Selective Unlock

Allows user to turn selective unlock on or off. When turned on, only the driver’s door is unlocked after the door
unlock operation. When the door handle request switch on the driver’s or front passenger’s side door is
pushed to be unlocked, only the corresponding door is unlocked first. All the doors can be unlocked if the
door unlock operation is performed again within 60 seconds. When this item is turned off, all the doors will be
unlocked after the door unlock operation is performed once.

Auto Door Unlock

Displays the auto door unlock options.

Off

Doors will have to be manually unlocked.

Ignition OFF

Doors will unlock when the ignition is turned off.

Shift to Park

Doors will unlock when the vehicle is shifted into Park.

Answer Bk. Horn

Allows user to turn answer back horn on or off. When turned on, the horn will chirp and the hazard indicators
will flash twice when locking the vehicle with the Intelligent Key.

Wipers

Displays the available wiper options.

Speed Dependent

Allows user to turn wiper with speed on or off.

2-28

Instruments and controls

Menu item

Explanation

Rear Door Alert

Displays the available Rear Door Alert options. For additional information, see “Rear Door Alert” (P. 2-78).

Horn & Alert

When selected, the alert is displayed and the horn sounds.

Alert Only

When selected, only the alert is displayed.

OFF

When selected, no alert or horn will be active.

Remote Start

Allows user to turn the Remote Engine Start on or off. When turned on, the engine can be started remotely.
For additional information, see “Remote Engine Start” (P. 3-18).

Maintenance

The maintenance menu allows the user to set reminders for various vehicle maintenance items.

WARNING

The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. For additional informa-
tion, see “Changing wheels and tires” (P. 8-39). Many factors including tire inflation, alignment, driving habits and road conditions
affect tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does not
mean your tires will last that long. Use the tire replacement indicator as a guide only and always perform regular tire checks.
Failure to perform regular tire checks, including tire pressure checks could result in tire failure. Serious vehicle damage could
occur and may lead to a collision, which could result in serious personal injury or death.

Menu item

Explanation

Maintenance

Displays various maintenance reminder options.

Oil Control System

Allows user to reset the current interval. This should only be done after completing oil change maintenance.

Oil Filter

Allows user to set a reminder at a specific interval or reset the current one.

Tire

Allows user to set a reminder at a specific interval or reset the current one.

Other

Allows user to set a reminder at a specific interval or reset the current one.

Instruments and controls

2-29

Alarm

The alarms menu allows the user to set various alerts.

Menu item

Explanation

Timer Alert

Allows user to set the timer alert for a specific interval.

Phone

Allows user to turn the phone alert on or off.

Mail

Allows user to turn the mail alert on or off.

Tire Pressures

The TPMS settings menu allows the user to change the tire pressure units displayed in the vehicle information display.

Menu item

Explanation

Tire Pressures

Displays available tire pressure settings.

Tire Pressure Unit

Allows user to select the tire pressure units that will display in the vehicle information display.

Unit

The units menu allows the user to change the units shown in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Mileage

Allows user to select different mileage display units.

Tire Pressures

Allows user to select different pressure display units.

Temperature

Allows user to select different temperature display units.

2-30

Instruments and controls

Language

The language menu allows the user to change the languages displayed in the vehicle information display.

Menu item

Explanation

Language

Displays available language options for the vehicle information display.

Factory Reset

The factory reset menu allows the user to restore the vehicle information display settings to factory status.

Menu item

Explanation

Factory Reset

Allows user to reset the vehicle information display settings to the original factory settings. Once selected,
the user can confirm or cancel the reset.

Instruments and controls

2-31

VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS

The following messages may appear in
your vehicle information display.

Engine start operation for
Intelligent Key system (if
I-Key battery level is low)

This indicator appears when the battery of
the Intelligent Key is low and when the In-
telligent Key system and the vehicle are not
communicating normally.

If this appears, touch the ignition switch
with the Intelligent Key while depressing
the brake pedal. For additional information,
see “Battery replacement” (P. 5-14).

Key Battery Low

This indicator appears when the Intelligent
Key battery is running out of power.

If this indicator appears, replace the bat-
tery with a new one. For additional infor-
mation, see “Battery replacement” (P. 8-24).

Key ID Incorrect

This warning appears when the ignition
switch is placed from the OFF position and
the Intelligent Key is not recognized by the
system. You cannot start the engine with
an unregistered key.

For additional information, see “NISSAN In-
telligent Key®” (P. 3-6).

Key System Error: See
Owner’s Manual

After the ignition switch is placed in the ON
position, this warning appears for a period
of time and then turns off.

The Key System Error message warns of a
malfunction with the Intelligent Key sys-
tem. If the warning appears while the en-
gine is stopped, it may be impossible to
start the engine.

If the warning appears while the engine is
running, you can drive the vehicle. However,
in these cases, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.

No Key Detected

This warning appears when the Intelligent
Key is left outside the vehicle with the igni-
tion switch in the ON position. Make sure
the Intelligent Key is inside the vehicle.

For additional information, see “NISSAN In-
telligent Key®” (P. 3-2).

Brightness indicator

This indicator appears when the vehicle
information display screen brightness is
being adjusted.

Alarm— Time for a driver
break

This indicator appears when the set time is
reached. The time can be set up to six
hours. For additional information, see “Set-
tings” (P. 2-25).

Chassis Control System Error: See
Owner’s Manual

This warning appears if there is an error in
the Automatic Brake Hold system. Have the
system checked. It is recommended that
you visit a NISSAN dealer for this service.
For additional information, see “Chassis
control” (P. 5-153) or “Automatic brake hold”
(P. 5-26).

2-32

Instruments and controls

Rear Door Alert is activated

When the system is enabled, this message
appears when the Rear Door Alert system
is active and can remind the driver to check
the back seat.
• Using the steering wheel switch, a driver

can select “Dismiss Message” to clear the
display for a period of time. If no selection
is made, this message automatically
turns off after a period of time.

• Using the steering wheel switch, a driver

can select “Disable Alert” to disable the
horn alert for the remainder of the cur-
rent trip.

WARNING

Selecting “Dismiss Message” during a
stop within a trip temporarily dis-
misses the message for that stop with-
out turning the system off. Alerts can
be provided for other stops during the
trip. Selecting “Disable Alert” turns off
the Rear Door Alert system for the re-
mainder of a trip and no audible alert
will be provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-20).

For additional information, see “Rear Door
Alert” (P. 2-78).

Check Rear Seat For All Articles

When the system is enabled, this message
appears when the vehicle comes to a com-
plete stop, the vehicle is transitioned from
the D (Drive) position to P (Park) position,
and the driver exits the vehicle. This mes-
sage alerts the driver, after a period of time,
to check for items in the rear seat after the
audible alert has been provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-20).

For additional information, see “Rear Door
Alert” (P. 2-78).

Door/Trunk Open

This warning appears when a door or the
trunk has been opened.

Drive sport mode indicator

A small “S” appears to the right of the Trans-
mission Shift Position indicator in the ve-
hicle information display when the drive
sport mode is engaged.

Activate the drive sport mode by pushing
the switch on the shift lever while the shift
lever is in the D (Drive) position.

For additional information, see “Driving the
vehicle” (P. 5-17).

Engine Oil Service due
in – – – miles

This distance to oil change will display if the
distance to oil change is approximately
1,000 miles (1,600 km) or less. Several re-
minders will display until the remaining dis-
tance is 0.

Instruments and controls

2-33

Engine Oil Service due now

This message will be displayed when re-
maining distance is 0, indicating service is
now due/overdue. After service is com-
pleted, the Oil Control System should be re-
set from the Maintenance settings menu.

Loose Fuel Cap

This warning appears when the fuel-filler
cap is not tightened correctly after the
vehicle has been refueled. For additional
information, see “Fuel-filler door” (P. 3-24).

Low Fuel

This warning appears when the fuel level in
the fuel tank is getting low. Refuel as soon
as it is convenient, preferably before the
fuel gauge reaches 0 (Empty).

There will be

a small reserve of fuel in the tank when
the fuel gauge needle reaches 0 (Empty).

Low Oil Pressure Stop
Vehicle

This warning appears if low oil pressure is
detected.

If the warning appears during normal driv-
ing, pull off the road in a safe area and stop
the engine

immediately

. Have the system

checked. It is recommended that you visit a
NISSAN dealer or other authorized repair
shop for this service.

The low oil pressure warning is not de-
signed to indicate a low oil level.

Use the

dipstick to check the oil level. For additional
information, see “Engine oil” (P. 8-7).

Low outside temperature
indicator

This indicator appears if the outside tem-
perature is below 37°F (3°C). The tempera-
ture can be changed to display in Fahren-
heit or Celsius. For additional information,
see “Unit” (P. 2-30).

Power will turn off to save the battery

This message appears after a period of
time if the ignition switch is in the ON posi-
tion and if the vehicle is in P (Park). For ad-
ditional information, see “Push-button igni-
tion switch positions” (P. 5-13).

Power turned off to save the battery

This message appears after the ignition
switch is automatically turned off. For addi-
tional information, see “Push-button igni-
tion switch positions” (P. 5-13).

Push brake and start
button to drive

This indicator appears when the shift lever
is in the P (Park) position and the vehicle
has not been started. Start the engine by
pushing the ignition switch with the brake
pedal depressed. You can start the engine
from any position of the ignition switch.

This message also appears when the ve-
hicle has been started using the Remote
Engine Start function (if so equipped). Push
the ignition switch with the brake pedal
depressed to place the ignition switch in
the ON position. For additional information,
see “Remote Engine Start” (P. 3-18).

2-34

Instruments and controls

Reminder Turn OFF
Headlights

This warning appears when the headlights
are left in the ON position when exiting the
vehicle. Place the headlight switch in the
OFF or AUTO position. For additional infor-
mation, see “Headlight and turn signal
switch” (P. 2-64).

Release Parking Brake

This warning appears when the parking
brake is set and the vehicle is driven.

Shift to Park

This warning appears when the ignition
switch is in the AUTO ACC or OFF position
and the shift lever is not in the P (Park) posi-
tion. Also, a chime sounds when the ignition
switch is in the AUTO ACC or OFF position.

If this warning appears, move the shift lever
to the P (Park) position and start the engine.

Shipping Mode On Push Storage Fuse

This warning may appear if the extended
storage switch is not pushed in. When this
warning appears, push in the extended
storage switch to turn off the warning. For
additional information, see “Extended stor-
age switch” (P. 2-80).

Rear seat belt warning

• This warning includes display of the seat

belts for rear positions only. Rear seat
belts that are unfastened will appear red.

• If any rear seat belts are unfastened

when the ignition switch is pushed to the
ON position, this warning will display for
about one minute, or until dismissed.

• When a rear seat belt is changed from

fastened to unfastened, this warning will
display for over one minute, or until
dismissed.

• If the vehicle is driven above 9 mph (15

km/h) during or after the status change,
this warning will display and the chime
will sound for over one minute. During
this time, the warning and chime cannot
be dismissed unless the rear seat belt is
fastened again.

NOTE:

Opening and closing a rear door while
stopped will reset this warning, similar to
pushing the ignition switch to ON again.

Tire Pressure Low - Add Air

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected. The
warning appears each time the ignition
switch is placed in the ON position as long
as the low tire pressure warning light re-
mains illuminated. If this warning appears,
stop the vehicle and adjust the tire pres-
sures of all four tires to the recommended
COLD tire pressure shown on the Tire and
Loading Information label. For additional
information, see “Low tire pressure warning
light” (P. 2-15) and “Tire Pressure Monitoring
System (TPMS)” (P. 5-5).

Transmission Shift Position
indicator

This indicator shows the transmission shift
position.

Service CVT

This warning appears when there is a
problem with the CVT system. If this
warning

appears,

have

the

system

checked. It is recommended that you visit a
NISSAN dealer for this service.

Instruments and controls

2-35

CVT hot Power reduced

This transmission has a high fluid tem-
perature protection mode. If the fluid tem-
perature becomes too high (for example,
climbing steep grades in high tempera-
tures with heavy loads, such as when tow-
ing a trailer), engine power and, under
some conditions, vehicle speed will be
decreased automatically to reduce the
chance of transmission damage. Vehicle
speed can be controlled with the accelera-
tor pedal, but the engine and vehicle speed
may be reduced.

WARNING

When the high fluid temperature pro-
tection mode operation occurs, vehicle
speed may be gradually reduced. The
reduced speed may be lower than
other traffic, which could increase the
chance of a collision. Be especially
careful when driving. If necessary, pull
to the side of the road at a safe place
and allow the transmission to return to
normal operation; or have it repaired if
necessary.

CVT Malfunction Service now

This warning appears when there is a
problem with the CVT system. If this
warning comes on, have the system
checked. It is recommended that you visit a
NISSAN dealer for this service.

CVT Stop the vehicle

This message appears 30 seconds before
the vehicle is shut down due to an above
normal operating transmission tempera-
ture. The Malfunction Indicator Light (MIL)
and malfunction warning (red) will illumi-
nate. Have the system checked. It is recom-
mended that you visit a NISSAN dealer im-
mediately for this service.

Engine Stalled: Stop safely

This message appears 30 seconds before
the vehicle is shut down due to an above
normal operating exhaust temperature.
The Malfunction Indicator Light (MIL) and
malfunction warning (red) will illuminate.
Have the system checked. It is recom-
mended that you visit a NISSAN dealer im-
mediately for this service.

Engine Malfunction Power reduced
Service now

This warning appears when the engine is
not operating under normal conditions.
If this warning appears, have the system
checked. It is recommended that you visit a
NISSAN dealer for this service.

Engine Malfunction Service now

This warning appears when there is a
problem with the engine. If this warning
appears, have the system checked. It is rec-
ommended that you visit a NISSAN dealer
for this service.

Engine hot Power reduced

This engine has a high fluid temperature
protection mode. If the fluid temperature
becomes too high (for example, climbing
steep grades in high temperatures with
heavy loads, such as when towing a trailer),
engine power and, under some conditions,
vehicle speed will be decreased automati-
cally to reduce the chance of engine dam-
age. Vehicle speed can be controlled with
the accelerator pedal, but the engine and
vehicle speed may be reduced.

2-36

Instruments and controls

WARNING

When the high fluid temperature protec-
tion mode operation occurs, vehicle
speed may be gradually reduced. The re-
duced speed may be lower than other
traffic, which could increase the chance
of a collision. Be especially careful when
driving. If necessary, pull to the side of
the road at a safe place and allow the
engine to return to normal operation; or
have it repaired if necessary.

Automatic Emergency
Braking (AEB) with
Pedestrian Detection
emergency warning indicator

This indicator appears along, with an au-
dible warning, when the system detects
the possibility of a forward collision.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-109).

Blind Spot Warning (BSW)
indicator

This indicator appears when the BSW sys-
tem is engaged.

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-45).

Cruise control indicator

This indicator shows the cruise control sys-
tem status.

When cruise control is activated, a green
circle will appear to indicate it is set. The
vehicle information display will also display
the speed the cruise control was set at. If
you accelerate past the set speed, the
speed will blink until you either cancel
cruise control or go back to the set speed. If
cruise control is on and canceled, the
speed will be displayed to show the speed
the vehicle will return to if the resume but-
ton is activated.

Forward Driving Aids Temporarily
Disabled Front Sensor Blocked See
Owner’s Manual

This message appears when the front ra-
dar sensor may be obstructed due to:
• mud, dirt, snow, ice, etc.
• inclement weather (rain, fog, snow, etc.).

All forward driving aids are temporarily dis-
abled until the system detects that the
front radar sensor is no longer obstructed.

For additional information, see:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection (P. 5-109).

• Intelligent

Forward

Collision

Warning

(I-FCW) (P. 5-123).

DAA Malfunction

This warning appears when the Intelligent
Driver Alertness (I-DA) system is not func-
tioning properly. For additional information,
see “Intelligent Driver Alertness (I-DA)”
(P. 5-138).

Take a break?

This alert appears when Intelligent Driver
Alertness (I-DA) system has detected that
the driver may be displaying fatigue or a
lack of attention. For additional informa-
tion, see “Intelligent Driver Alertness (I-DA)”
(P. 5-138).

Lane Departure Warning
(LDW) indicator

This indicator appears when the LDW sys-
tem is engaged.

For additional information, see “Lane De-
parture Warning (LDW)” (P. 5-32).

Instruments and controls

2-37

Malfunction See Owner’s Manual

This warning appears when one of the fol-
lowing systems (if so equipped) is not func-
tioning properly:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Blind Spot Warning (BSW)
• Driver Attention Alert
• Intelligent

Forward

Collision

Warning

(I-FCW)

• Lane Departure Warning (LDW)
• Rear Automatic Braking (RAB)
• Rear Cross Traffic Alert (RCTA)

If one or more of these warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-109), “Blind Spot Warning
(BSW)” (P. 5-45), “Intelligent Driver Alertness
(I-DA)” (P. 5-138), “Intelligent Forward Colli-
sion Warning (I-FCW)” (P. 5-123), “Lane Depar-
ture Warning (LDW)” (P. 5-32), “Rear Auto-
matic Braking (RAB)” (P. 5-102) and “Rear
Cross Traffic Alert (RCTA)” (P. 5-57).

Parking Sensor

This indicator appears when the sensor is
activated. For additional information, see
“Rear Sonar System (RSS)” (P. 5-155).

Parking Sensor Error: See Owner’s
Manual

This warning appears when there is an er-
ror with the system. For additional informa-
tion, see “Rear Sonar System (RSS)” (P. 5-156).

Rear Automatic Braking
(RAB) system warning
indicator

This indicator appears to indicate the sta-
tus of the Rear Automatic Braking (RAB)
system. For additional information, see
“Rear Automatic Braking (RAB)” (P. 5-102).

Unavailable High Cabin Temperature

This message appears when the camera
detects an interior temperature of more
than 104°F (40°C). For additional informa-
tion, see “Lane Departure Warning (LDW)”
(P. 5-32).

Unavailable Side Radar Obstruction

This message appears when the Blind
Spot Warning (BSW)/Rear Cross Traffic Alert
(RCTA) systems become unavailable be-
cause a radar blockage is detected. For
additional information, see “Blind Spot
Warning (BSW)” (P. 5-45) or “Rear Cross Traf-
fic Alert (RCTA)” (P. 5-57).

Vehicle ahead detection
indicator

This indicator shows when the following
systems are engaged and have detected a
vehicle:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Intelligent

Forward

Collision

Warning

(I-FCW)

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-109) or “Intelligent Forward
Collision Warning (I-FCW)” (P. 5-123).

2-38

Instruments and controls

information

• Audio information
• Compass and navigation information

(if so equipped)

• Variable Compression Turbo information

(if so equipped)

• Shift position
• Distance to empty
• Odometer/twin trip odometer
• Clock and outside temperature

HOW TO USE THE VEHICLE
INFORMATION DISPLAY

The vehicle information display can be
changed using the

, and OK buttons located on the steer-

ing wheel.

䊊

- Use these buttons

to navigate the vehicle information
display.

䊊

OK - Change or select an item in the
vehicle information display.

䊊

— Returns to the previous menu.

LIC3224

LIC3566

VEHICLE INFORMATION DISPLAY —7
INCH (18 cm) TYPE B (if so equipped)

Instruments and controls

2-39

The OK,

and

buttons also

control audio and control panel functions
in some conditions. Most screens and
menus offer instruction prompts of the
steering switch buttons to indicate how to
control the vehicle information display.
Dots on the right side of the vehicle infor-
mation display will appear if there is more
than one page of menu items or warning
messages. The OK button changes the au-
dio source and the

buttons also

control voice recognition manual mode.
The OK button can be used to change the
audio source when the audio screen is dis-
played. The

buttons can be used

when

controlling

voice

recognition

prompts manually. For additional informa-
tion, refer to the separate NissanConnect®
Owner’s Manual.

STARTUP DISPLAY

When the vehicle in placed in the ON position
the vehicle information display may display
the following screens (if so equipped):
• Home
• Drive Computer — Speed, Fuel Economy,

Trip Distance & Time

• Convenience
• Tire Pressure
• Variable Compression Turbo
• Speed Limit Sign
• Compass and Navigation
• Audio/telephone
• ProPILOT Assist
• Driving Aids
• Settings
• Warnings*

*Warnings will only display if there are any
present. For additional information, see “Ve-
hicle information display warnings” (P. 2-52).

To control what items display in the vehicle
information display, see “How to use the
vehicle information display” (P. 2-39).

2-40

Instruments and controls

1. Home

This display indicates the home screen.

2. Vehicle speed

The vehicle speed mode shows the current
vehicle speed and the average vehicle
speed since the last reset.

Average vehicle speed:

Press and hold the OK button on the steering
wheel to bring up the drive computer Reset
menu, and follow the instructions to reset.

The average vehicle display is updated ev-
ery 30 seconds. the first 30 seconds after a
rest, the display shows “– – –’

3. Blank

This display is a blank screen and shows no
information.

4. Fuel economy display

Current fuel consumption:

The

current

fuel

consumption

mode

shows the current fuel consumption.

Average fuel consumption:

The average fuel consumption mode
shows the average fuel consumption since
the last reset. Press and hold the OK button

on the steering wheel to bring up the drive
computer Reset menu, and follow the in-
structions to reset.

The display is updated every 30 seconds.
For about the first 1/3 of a mile (500 m) after
a reset, the display shows “– –.”

5. Elapsed time and trip odometer

Elapsed time:

The elapsed time shows the time since the
last reset. Press and hold the OK button to
bring up the drive computer Reset menu,
and follow the instructions to reset.

Trip odometer:

The trip odometer shows the total dis-
tance the vehicle has been driven since the
last reset. Press and hold the OK button on
the steering wheel to bring up the drive
computer Reset menu, and follow the in-
structions to reset.

6. Tire Pressures

The tire pressure mode shows the pressure
of all four tires while the vehicle is driven.

When the “Tire Pressure Low — Add Air”
warning appears, the display can be
switched to the tire pressure mode by

pushing the

switch to reveal

additional

details

the

displayed

warning.

For additional information, see “Low tire
pressure warning light” (P. 2-15), “Tire Pres-
sure Monitoring System (TPMS)” (P. 5-5), “Flat
tire” (P. 6-3) and “Types of tires” (P. 8-36)

7. Variable Compression Turbo
(if so equipped)

This is not a physical gauge. It is a display
option in the vehicle information display
that can be selected. For additional infor-
mation, see “Variable Compression Turbo”
(P. 2-8).

8. Traffic Sign Recognition (if so
equipped)

The Traffic Sign Recognition (TSR) system
provides the driver with information about
the most recently detected speed limit.

For additional information, see “Traffic Sign
Recognition (TSR) (P. 5-29).

9. Compass (if so equipped)

This display indicates the direction the
vehicle is heading.

2-42

Instruments and controls

10. Navigation (if so equipped)

When the route guidance is set in the navi-
gation system, this item shows the naviga-
tion route information.

11. Audio

The audio mode shows the status of audio
information.

12. ProPILOT Assist (if so equipped)

The ProPILOT Assist mode shows operat-
ing conditions for the following systems:
• Intelligent Cruise Control (ICC)
• Steering Assist

The display will also be shown when the
ProPILOT Assist is turned on. For additional
information, see “ProPILOT Assist” (P. 5-69).

13. Driving Aids

The driving aids mode shows the operat-
ing condition for the following systems (if
so equipped):
• Forward

–– Automatic Emergency Braking (AEB)

with Pedestrian Detection system

–– Intelligent Forward Collision Warning

(I-FCW)

• Lane:

–– Lane Departure Warning (LDW)
–– Intelligent Lane Intervention (I-LI)

• Blind Spot:

–– Blind Spot Warning (BSW)

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-45), “Lane Departure
Warning (LDW)” (P. 5-32), “Automatic Emer-
gency Braking (AEB) with Pedestrian Detec-
tion” (P. 5-109), “Intelligent Forward Collision
Warning (I-FCW)” (P. 5-123). or “Intelligent
Lane Intervention (I-LI)” (P. 5-39).

14. Warnings

The warnings mode allows the driver to
view any present warnings.

NOTE:

The warnings mode will only display if
any are present.

15. Settings

The settings mode allows the driver to view
or modify settings.

RESETTING THE DRIVE COMPUTER

The drive computer is divided across three
screens:
• Average Speed
• Average Fuel Economy
• Trip Distance & Time

1. Press the

buttons

until you reach the desired drive com-
puter mode.

2. Press and hold the OK button for ap-

proximately 1 second to reset the infor-
mation

the

currently

displayed

screen.

NOTE:

If you wish to reset all drive computer
values at once, press and hold the OK
button for approximately 3 seconds until
a reset menu appears; and follow the
instructions.

Instruments and controls

2-43

Nissan Altima (2024 year). Manual in english - page 4