|
|
P0335 CKP SENSOR (POS) EC-281 < COMPONENT DIAGNOSIS > [QR25DE FOR CALIFORNIA] C D E F G H I J K L M A EC N P O 11. CHECK GEAR TOOTH Visually check for chipping signal plate gear tooth. YES >> GO TO 12. NO >> Replace the signal plate. 12. CHECK INTERMITTENT INCIDENT GI-42, "Intermittent Incident" . >> INSPECTION END Component Inspection INFOID:0000000004349319 1. CHECK CRANKSHAFT POSITION SENSOR (POS)-I 1. Turn ignition switch OFF. 2. Loosen the fixing bolt of the sensor. 3. Disconnect crankshaft position sensor (POS) harness connector. 4. Remove the sensor. 5. Visually check the sensor for chipping. YES >> GO TO 2. NO >> Replace crankshaft position sensor (POS). 2. CHECK CRANKSHAFT POSITION SENSOR (POS)-II Check resistance between crankshaft position sensor (POS) termi- nals as follows. Is the inspection result normal? YES >> INSPECTION END NO >> Replace crankshaft position sensor (POS). JMBIA0063ZZ Terminals (Polarity) Resistance Ω [at 25°C (77°F)] 1 (+) - 2 (-) Except 0 or ∞ 1 (+) - 3 (-) 2 (+) - 3 (-) PBIA9584J |