|
|
DLK-166 < REMOVAL AND INSTALLATION > [WITH INTELLIGENT KEY SYSTEM] HOOD LOCK INSTALLATION Installation is in the reverse order of removal. CAUTION: After installation, perform hood lock control inspection. Refer to . Inspection INFOID:0000000009268866 NOTE: If the hood lock cable is bent or deformed, replace it. ary striker (2) with hood’s own weight. 2. Check that primary latch (1) is securely engaged with primary striker (2) when hood is dropped with hood’s own weight from approximately 200 mm (7.9 in) height. 3. While operating the hood lock/fuel filler door release handle assembly, carefully check that the front end of hood is raised by approximately 20.0 mm (0.79 in). Also check that hood lock/fuel filler door release han- dle assembly returns to the original position. 4. Check that hood lock/fuel filler door release handle assembly operates at 49 N (5.0 kg-f, 11.0 lb-f) or below. 5. Install so that static the hood is 300 – 490 N (31.0 – 50.0 kg-f, 67.4 – 110.2 lb-f). NOTE: • Do not exert vertical force on right side and left side of hood lock. • Do not press simultaneously both sides. 6. Check the hood lock lubrication condition. If necessary, apply a suitable multi-purpose grease to second- ary latch (1) and hood lock assembly (2). JMKIA7993ZZ JMKIA7994ZZ JMKIA8000ZZ |