|
|
DLK-158 < REMOVAL AND INSTALLATION > [WITH INTELLIGENT KEY SYSTEM] TRUNK LID TRUNK LID Exploded View INFOID:0000000009268855 TRUNK LID ASSEMBLY INFOID:0000000009268856 CAUTION: • Use two people when removing or installing trunk lid assembly due to its heavy weight. • Use protective tape or shop cloths to protect surrounding components from damage during removal and installation of trunk lid assembly. REMOVAL 1. Remove trunk lid finisher (if equipped). Refer to INT-35, "Removal and Installation" . 2. Disconnect the harness connector from the license plate lamp. Refer to EXL-114, "Removal and Installa- 3. Remove harness clips from trunk lid assembly, and then pull out harness from trunk lid assembly. CAUTION: Use two people when removing or installing trunk lid, due to its heavy weight. INSTALLATION Installation is in the reverse order of removal. 1. Trunk lid weatherstrip 2. Torsion bar clip 3. Torsion bar (RH) 4. Torsion bar (LH) 5. Trunk lid hinge (LH) 6. Bumper rubber 7. Trunk lid striker 8. Trunk lid assembly A Center mark B Seam JMKIA8154ZZ |