|
|
PWC-26 < BASIC INSPECTION > SYSTEM INITIALIZATION SYSTEM INITIALIZATION Description INFOID:0000000007563136 If any of the following operations are performed, the initialization is necessary for normal operation of power window motor (driver side/passenger side) is interrupted by blown fuse or disconnection and connection of • Disconnection and connection of power window main switch or front power window switch (passenger side) harness connector. • Removal of power window motor (driver side/passenger side) from module assembly. CAUTION: The following specified operations can not be performed under the non-initialized condition. Work Procedure INFOID:0000000007563137 1. STEP 1 1. Turn ignition switch ON. 2. Close roof. 3. Operate power window switch to fully open the window. (This operation is unnecessary if the window is 4. Continue pulling the power window switch UP (AUTO-UP operation). Even after glass stops at fully closed 5. Check that AUTO-UP function operates normally. >> GO TO 2. 2. STEP 2 Check anti-pinch function. Refer to >> END Revision: 2013 February 2012 Murano CrossCabriolet |