Skoda Enyaq (2021 year). Manual in english

Heating and air conditioning system › Heated steering wheel

NOTICE

Settings

Risk of seat damage!

Lock increases in heat output for the rear seat heater

▶ Do not kneel on the seats or otherwise apply concentrated

pressure to them.

› Press the button under the Infotainment system

Rear

Tap on

in the Infotainment screen.

▶ Do not turn on the heater in the following situations:

▶ The seat is not occupied.

When the function is switched on, the heating output can only

▶ There are objects on the seat, such as a child seat.

be turned down.

▶ There are additional seat covers or protective covers on

The function also blocks the possibility of setting the tem-

the seat.

perature in the display in the rear centre console.

Requirements

Heated steering wheel

✓ Ignition on

Requirements

✓ Ignition on

Operation

› Tap the or function surface in the Infotainment screen to

Operation

turn on front seat heating.

› Press the or button in the rear centre console to switch on

› Press the button on the multifunction steering wheel.

the rear seat heating.

Or:

The heating is switched on with maximum heating output. By re-

› Press the button under the Infotainment.

peatedly pressing the button, the heating output is reduced until

› Tap on function surface

Front

in the Infotainment

it is switched o.

screen.

The heat output is determined by the number of illuminated indi-

The heating is switched on with maximum heating output. By re-

cator lights that are shown in the button or in the Climatronic

peatedly pressing the button, the heating output is reduced until

display.

it is switched o.

If the heating is switched on with maximum heat output, the

heating power is automatically lowered after 10 minutes.

Driver information system › Digital instrument cluster

▶ Display of mileage availability » page 98, Overview.

Driver information system

When the selector lever is moved, a diagram and a note for

Digital instrument cluster

the mode selection of the automatic transmission are shown in

Overview

the display.

Operation

Overview of the buttons/dials on the multifunction steering

wheel

Toggle extension of the display

area of the assistance systems

in the left display area

Toggle extension of the display

area of the navigation in the

right display area

Display area with selected information:

▶ Time

▶ Warning lights

▶ Messages and information

▶ Outside temperature

By pressing the button

or. the original display setting is

Display area of the assistance systems

restored.

Navigation display area

Display area with selected information:

Settings

▶ Speed

Setting the language

▶ Warning lights

The language is set in the Infotainment in menu

▶ Set recuperation level

▶ Mode set for selector lever of the automatic transmission?

Setting the time

The time is set in the Infotainment in menu

▶ Charging status of the high-voltage battery

▶ Range

Driver information system › Head-up display with augmented reality

Setting the brightness of the instrument cluster lighting

Information from assistance systems and navigation is pro-

The brightness is adjusted automatically according to the given

jected.

lighting conditions.

Display area with selected information regarding speed, nav-

The manual brightness adjustment is carried out as follows when

igation and assistance systems

the dipped beam is switched on:

› In the Infotainment system, select the menu

Interi-

Restriction

or Ambient lighting .

› Adjust the setting.

The function may, for example, be restricted or unavailable due

to strong sunlight.

Sunglasses with polarisation filters can negatively aect the

Head-up display with augmented reality

visual perception of the display.

Functionality

The head-up display projects selected information onto the

Settings

windscreen into the driver's field of vision.

› The menu

Interior .

› By moving your finger sideways, choose the screen with the

menu item Head-Up display .

› Select Head-Up display .

In the displayed menu, the following menu items can be set:

▶ Activation/deactivation

▶ Position

▶ Brightness

▶ Colour scheme

▶ Selection of projected information

Display area with information that is projected directly onto

objects in the driver's field of vision

Driver information system › Driving data

Driving data

Select memory

The memory selection is made by touching the corresponding

Overview

tab in the infotainment screen in the following menu

The following information is displayed in the Infotainment:

Reset memory

Distance travelled

The memory is reset in Infotainment as follows:

Driving time

› In Infotainment, select the following menu:

Average speed

Average fuel consumption

Interior Instrument cluster

Memory

› Re-set the associated memory.

The system saves the driving data in the following memories:

Or:

Since start

▶ Driving data from the time of switching on the ignition until

› Reset the associated memory by pressing the button

the ignition is switched o again is stored in the memory. If the

journey is interrupted for more than 2 hours, the memory will

be reset.

Settings

Long-term

▶ The driving data of all trips up to a total of 99 hours and 59 mi-

Setting units

nutes driving time or 9999 km driving distance is stored in the

The units are set in the Infotainment in menu

memory. If one of the listed values is exceeded, the memory is

reset.

From charging

▶ The memory stores driving data from the last charging. The

memory is reset the next time charging is done.

Operation

Display driving data

The driving data is displayed in the infotainment system in the

Driver information system › Available mileage

Available mileage

▶ Very low or high temperature of the high-voltage battery

WARNING

Overview

Adapt the driving style to the available mileage and the state of

Display of the recuperation process and mileage availability

charge of the high-voltage battery.

If the driving performance is limited, the battery is protected

Recuperation area with highligh-

ted segment

against excessive wear.

Range of available mileage

Highlighted segment

Troubleshooting

When the segment is in area A

WARNING

the currently recuperated ener-

Risk of an accident!

gy is displayed.

In case of limited or inadequate mileage, the speed, acceleration

When the segment is in area B the power currently used is

and several convenience functions, e.g. the air conditioning may

shown.

be restricted.

Limited mileage

Functionality

illuminates

As the state of charge of the high-voltage battery decreases, the

The mileage is limited due to the low state of charge of the high-

blue line in the recuperation area extends.

voltage battery.

As the state of charge of the high-voltage battery increases, the

› The high-voltage battery is charging.

green line extends in the range of available mileage.

A very low or high temperature of the high-voltage battery can

When driving with high mileage, the highlighted segment de-

also aect the mileage.

creases in the range of available mileage.

Inadequate mileage

illuminates

Restriction

The mileage is inadequate due to the low state of charge of the

The available mileage is limited under the following conditions:

high-voltage battery.

▶ Low state of charge of the high-voltage battery

› The high-voltage battery is charging.

▶ Rapid acceleration

Driver information system › Vehicle status

A very low or high temperature of the high-voltage battery can

Functionality

also aect the mileage.

In the event of a system fault, messages regarding the fault in

question are displayed on the instrument cluster display when

Vehicle status

the ignition is switched on.

Messages in relation to faults can also be displayed in the Info-

Display

tainment.

The vehicle status is displayed in the infotainment system in the

The warning messages will continue to be displayed until the

malfunctions have been remedied. After the first display of the

message, only the indicator lights

(Hazard) or

(Warning)

are displayed.

Button SET

Overview

The button allows quick access to the settings of the follow-

ing vehicle systems (depending on the vehicle fittings):

▶

Interior monitoring » page 40, Settings.

Vehicle areas displayed in colour indicate associated warn-

▶ Tyre pressure monitor » page 230, Functionality.

ings

▶

Access to selection and settings for driver assistance systems

Service appointments and vehicle identification number

▶ Access to other vehicle settings

(VIN)

Tyre pressure monitor

Warning messages regarding the vehicle condition and their

quantity

Total distance traveled and distance traveled (trip)

The distance covered (trip) can be reset by pressing the but-

ton

100 Familiarization with infotainment › Infotainment overview

▶ The Infotainment screen is operated by touching it lightly

Familiarization with infotainment

with your finger.

Infotainment overview

HOME menu

Usage

The HOME menu is used for the quick start of preferred func-

tions.

The functional areas can be set and their arrangement can be

changed.

› To display the menu HOME tap the symbol in infotainment.

Settings

Touchscreen

Display another page

Touch slider for operating the infotainment functions:

› To display another page of the HOME menu, press the screen

▶ Set the temperature of the air conditioning system

and drag to the left or right.

▶ Volume setting

Add a preferred menu

▶ Zoom in / out of the map in Navigation

› To display the editing mode hold a finger on the screen.

Condition-based:

› Tap a free space with functional areas.

▶ Infotainment switched off

› Select a menu with the desired dimension of the functional

surface.

▶ Tap: Turn on Infotainment

▶ Infotainment switched on

The Infotainment only oers font sizes that correspond in di-

mension to the fields with functional areas that are currently

▶ Tap: Switch sound o/on

free.

▶ Hold: Switch o Infotainment

› To end edit mode, tap .

NOTICE

Danger of screen damage!

Familiarization with infotainment › Preferred functions

101

Remove the preferred menu

› To display a menu of functions, hold your finger on the selec-

› To display edit mode, press and hold the screen with one fin-

ted function and move it to the position of the preferred func-

ger.

tions in the status bar.

› Tap on the desired menu.

› To complete the process, tap the symbol

› To end edit mode, tap .

Remove the preferred function

Add/remove one side of the HOME menu

› Hold your finger on the shortcut of the function in the status

› To display edit mode, press and hold the screen with one fin-

bar on the infotainment screen.

ger.

› Tap the symbol

› Tap on

› To add another page, tap

MENU menu

The maximum number of pages is 4.

› Tap to remove a page.

Usage

The minimum number of pages is 2.

Available infotainment menus are displayed in the menu MENU.

› Tap to return to the edit mode.

The menu MENU will be displayed by tapping the symbol on

the infotainment screen.

Preferred functions

Settings

Usage

The position of the functional surfaces in the MENU menu can

Infotainment oers the option of setting 3 preferred functions

be customized as follows:

in the middle of the status bar to enable them to be started

quickly.

› Press and hold the desired functional surface until it is free.

› Move the functional surface to a dierent position.

Operation

Add a preferred function

› Hold your finger in the area of the preferred functions in the

status bar on the infotainment screen.

102 Familiarization with infotainment › Configuration wizard

Configuration wizard

Factory settings

Resetting the Infotainment to factory defaults restores all facto-

Functionality

ry defaults.

The configuration wizard helps to set certain Infotainment func-

› Turn on the ignition and switch on Infotainment.

tions.

› Tap on

The configuration wizard is automatically displayed if the ignition

› Reset to factory settings select and confirm the reset.

is on and there are at least two non-selected menu items after

Resetting to factory settings will deactivate the ŠKODA Con-

turning on the Infotainment.

nect services. To activate this, it is necessary to restart the info-

tainment and reactivate the services.

› To switch off the automatic display, when the configuration

wizard is displayed tap Don't show again .

› For manual display

tap Configuration wizard .

Troubleshooting

Infotainment not responding

System

If the infotainment does not respond, restart it as follows:

Restriction

› Hold for longer than 10 s.

› Wait for the restart to complete.

For safety reasons, operation of some Infotainment functions

while driving is not possible or is restricted.

The Infotainment system indicates this by means of a message

System update

in the screen.

We recommend having the system update carried out by a

specialist company.

Settings

The system update ensures optimal function of the Infotainment

system, e.g. compatibility with new phones.

Setting basic functions

The following Infotainment functions are set in the

menu:

Determine system version

›

System information .

▶ Time and date

▶ Language

▶ Units

▶ Restore factory settings

Familiarization with infotainment › Sound

103

Sound

Infotainment operation

Settings

Operation on the screen

The Infotainment sound is set in the menu

What you should be mindful of

The following menu items can be set:

Danger of screen damage!

▶ Setting the equalizer

▶

The Infotainment screen is operated by touching it lightly

▶ Adjusting the volume ratio

with your finger.

▶ Volume adjustment of individual Infotainment functions

The volume can be adjusted on e.g. one of the following menu

items:

Overview

▶ Volume adjustment of voice commands

▶ Setting the maximum volume when Infotainment is turned

▶ Speed-dependent volume setting

▶ Setting the Infotainment to mute with the parking aid

switched on

Depending on the equipment, the following advanced sound set-

tings can be set

▶ Setting space optimisation

▶ Setting the audio profiles according to genre

Status bar

▶ Adjusting the subwoofer volume

Bar with the functional surfaces of the displayed menu

The volume can be adjusted by moving a finger on the touch

Display/close the submenu window

slider below the infotainment screen.

Display of the Infotainment control centre

Display of the HOME menu

Preferred functions

Display of the MENU menu

104 Infotainment operation › Keyboard

Operation

▶ Keyboard for input

▶ Keyboard for search

In principle, operation by touch is identical to the operation of a

mobile phone.

For help with gesture control, see the instructions in the Info-

Operation

tainment.

The Infotainment keypad is used to enter characters, letters and

Displaying operation help

numbers.

› Tap on

The keypad will be automatically displayed when Infotainment

prompts for characters.

Settings

When entering characters, corresponding entries are searched

The following basic screen functions are set in the menu

for.

Screen:

The entry to be searched for can be entered including diacritics.

▶ Image of the screen background

The keyboard will only provide characters that match the stored

▶ Brightness level of the screen

entries.

▶ Switch o the screen

› To display searched entries tap

▶ Display the time

▶ Confirmation sounds and animations

The number of searched entries is displayed above the symbol

Show additional keypad languages

Keyboard

To use the additional keypad languages, the desired languages

Overview

must be set first.

›

To use, repeatedly tap on the keyboard or on the flag icon

The arrangement of the keyboard characters depends on the set

until the desired language keyboard is displayed.

infotainment language.

Further character variants

Depending on the context, the following types are used in info-

› Press and hold the character with the other character variant.

tainment:

›

Select the desired symbol.

▶ Alphanumeric

▶ Numeric

Infotainment operation › Control Centre 105

Setting additional keypad languages

Control Centre

› For set-up

tap Additional keypad languages .

› Select the desired language.

Control Centre

Usage

The Infotainment control centre provides quick access to pre-

ferred functions.

Display and administration of functional surfaces of prefer-

red features

Overview

Display list of informational messages

Display of the control centre

Preferred functions

› Press the bar at the top of the

Setting the instrument and key illumination

screen and drag down.

Closing the control centre

› Press the bar at the bottom of the screen and drag up.

Or:

› Wait 5 seconds.

Set functional surfaces of preferred features

› To display the edit mode, tap on the empty functional surface

with the icon or hold down the occupied functional surface.

› To add the preferred feature, hold down the functional surface

of the desired function and move it from the lower part of the

screen to the functional surface in the upper part of the

screen.

106 Infotainment operation › Voice control

› To close edit mode, tap on

✓ Infotainment switched on

Operating conditions for advanced voice control

To use the advanced voice control, the following conditions

Voice control

must also be met:

Functionality

✓ The vehicle supports the function.

✓ The vehicle has Infotainment and functions that can be con-

Voice control principle

trolled by the advanced voice control.

Voice control works according to the principle of dialogue be-

✓ The ŠKODA Connect services are active.

tween the user and the Infotainment system.

✓ The vehicle is within range of a contractual mobile network,

The user says a voice command. The Infotainment system re-

through which the connection to ŠKODA Connect Services is

sponds or executes the voice command.

ensured.

It is possible to interrupt a dialogue at any time and issue a new

✓ Privacy is switched o in the vehicle. privacy 50 seconds.

statement without having to wait for a complete response.

Requirement for recognition of the activation command

Advanced voice control

✓ Activated menu item

Voice control Active

The advanced voice control of the vehicle enables an online

search and operation of the vehicle functions.

The advanced voice control understands fluently spoken, com-

Operation

plete sentences. It is not necessary to use precisely defined

Switch on voice control

commands or empty phrases.

› Press the button on the multifunction steering wheel.

The advanced voice control can, for example, search for special

Or:

destinations or dictate SMS messages if the connected tele-

phone makes this possible.

› Say the activation command “OK Laura”.

This function allows you to combine the search in the online and

After switching on, the icon is displayed.

offline data of the Infotainment. The transition between online

Enter voice command

and offline search is seamless and imperceptible to the user.

› Speak a voice command with voice control switched on.

During recognition of the voice command, the icon is dis-

Operating conditions

played.

✓ Ignition on

The Infotainment system then executes the voice command or

plays the message. During the message, the icon is displayed.

Infotainment operation › Voice control 107

After the execution of the voice command, voice control is

Restriction

switched o.

For some Infotainment languages, there is no voice control avail-

The activation command can be used to speed up voice con-

able. The Infotainment system will indicate this.

trol “OK Laura” together a voice command.

The messages are generated by Infotainment. Flawless clarity

Correcting a voice command

(e.g. road or city name) cannot always be guaranteed.

› During voice command input, press the button on the multi-

You cannot use voice control while a phone call is in progress.

function steering wheel and say a new voice command.

Stopping voice control

Stopping leaves more time for voice command input, e.g. for

Settings

searching for a phone contact.

The following voice control functions are set in the menu

› Move your finger up or down over the Infotainment screen.

Voice control:

Or:

▶ Confirmation tones

› Say the voice command “pause”.

▶ Enable/disable use of the activation word

Resuming stopped voice control

› Press the button on the multifunction steering wheel.

Self-help

Or:

Starting acoustic help

› Tap on in the Infotainment screen.

› If the Infotainment system is expecting a voice command, say

Stopping the played back message

“Help”.

› Press the button on the multifunction steering wheel.

The “Help” voice command can be issued repeatedly for further

tips on voice control.

Ending voice control

› Press the button on the multifunction steering wheel twice.

Displaying operation help

Or:

› Tap on

Or:

› Say the voice command “cancel” during voice command input.

› If Infotainment is expecting a voice command, say “overview”.

108 Radio › FM Radio

Player

Radio

FM Radio

Overview

Display menu

› Tap on

Display the player

› Tap on

› Press the bar button on the right

edge of the screen and drag to the

Radio station logo

left.

/ Switch to the previous/next station

The type of switching depends on how the arrow buttons

are set up

Radio Arrow buttons:.

Switching the SCAN function on / o

Close player

› Tap on

Activate/deactivate muting

Or:

Close player

› Press the bar button on the left edge of the player and drag to

List of available stations

the right.

› To display, tap on

› To select a frequency range tap

Radio › FM Radio 109

› Hold the line with the name of the desired station.

› Tap on or the preset button for favourite stations that you

want to replace.

Delete the stored preset button for the favourite station

›

To erase, tap on

in the Radio main menu.

▶ To delete one preset button, tap on

▶ To delete all preset buttons, tap on and confirm the dele-

tion.

SCAN function

List of available stations

The function plays receivable stations of the selected frequency

Show available frequency ranges

range in succession for a few seconds each.

After selecting a frequency range, the desired station must

› Display the radio player.

still be selected.

› To Start automatic play, tap

Select frequency range

› To End automatic play, tap

After selecting a frequency range, the last station to be

played in the respective frequency range is set.

Find stations manually

› Display list of available sensors.

Station currently being played

› Tap on

Station stored on the presets

For FM stations, the functional area is available when the

Find stations manually

menu item

Radio Station display: FM is set.

Operation

Store the current station to a preset button for preferred sta-

tions

› To store, tap on

in the Radio menu.

Store stations to a preset button for favourite stations from

the list of available stations

› To display the station list, tap on in the Radio menu.

110

Radio › FM Radio

/ Switch to the previous/next available station

Settings

/ Look for each other

Switch traffic reception (TP) for stations on/off

Store the currently selected station on a station key for the

› In the Radio main menu, tap

preferred station.

› Radio Trac program (TP) .

The frequency range scale can be used for the search.

Switch RDS on/off

The menu item is only available for some countries.

› Hold down the scroll mark and move it to the desired position.

› In the Radio main menu, tap

Function areas

› Radio Radio Radio Data System (RDS) .

The variant for changing stations is set as follows using the

functional areas

If the RDS function is disabled, the following menu items in FM

station settings are not available:

› In the menu Radio

Radio Changing the station: .

▶ Trac program (TP)

› Select the variant for switching between the stations stored

on the station buttons or the stations stored in the list of avail-

▶ Radio text

able stations.

▶ RDS Regional

▶ Automatic frequency change (AF)

▶ Regional station logo

Restriction

Turn on/off radio text reception

▶ Car parks, tunnels, tall buildings or mountains can restrict radio

When the function is switched on, you can see more information

reception.

about the content broadcast from the station to which you are

▶ In the rear side windows, there are antennas for receiving the

listening.

radio signal.

› In the Radio main menu, tap

Covering the panes with foils or metal-coated labels may af-

› Radio Radio text .

fect the reception of the radio signal.

Displaying FM / DAB stations or FM stations in the list of

▶ The ŠKODA AUTO company assumes no responsibility for the

available stations

availability, correct functioning and broadcast information of

Depending on the following setting, the stations of the selected

the RDS service.

frequency range are displayed in the list of available stations.

› In the Radio main menu, tap

› Radio Station display: .

Radio › FM Radio

111

› Select one of the following menu items:

Add the station logo

Infotainment oers the option of adding logos, which are stored

▶ FM/DAB - the list shows available FM and DAB stations.

in the Infotainment memory, to the stations.

▶ FM - the list shows available FM stations.

› In the menu Radio

Radio Tap station logos and select the desired

frequency range.

Tap on Advanced setting

Or:

Switch automatic frequency control (AF) on/off

› In the list of preferred stations, tap on

at the desired

When the function is switched on and the signal of the FM sta-

preset button.

tion currently being listened to is weak, Infotainment automati-

› Select the desired logo.

cally sets the same station to a dierent frequency with a better

signal.

To turn o the logo display, tap on in the list of available

logos.

› In the Radio main menu, tap

Switch adding automatic station logos on/off

› Radio Automatic frequency change (AF) .

When the function is switched on, a station logo from the Info-

Automatic change of frequency to a regionally linked FM sta-

tainment memory is added when the station is stored on a pre-

tion

set.

Infotainment provides the option of automatically switching to a

› In the Radio main menu, tap

regionally linked FM station in case of signal loss of the FM sta-

tion being listened to.

› Radio Tap Automatic selection of station logos .

› In the Radio main menu, tap

Regional FM station logo

› Radio RDS Regional: .

Infotainment provides the option of using country-specific FM

station logos.

› Select one of the following menu items:

› In the Radio main menu, tap

▶ Fix - When the signal is lost, another station must be set man-

ually.

› Radio Region for station logo: .

▶ Automatic - automatic selection of the station with the best sig-

nal reception.

If reception is lost in the given region, Infotainment will auto-

matically set another available region.

112

Radio › DAB radio

DAB radio

Radio station logo

/ Switch to the previous/next station

Overview

The type of switching depends on how the arrow buttons

Display menu

are set up

Radio Arrow buttons:.

› Tap on

Switching the SCAN function on / o

Display the player

Activate/deactivate muting

› Tap on

Close player

› Press the bar button on the right

edge of the screen and drag to the

List of available stations

left.

› To display, tap on

› To select a frequency range tap

Close player

› Tap on

Or:

› Press the bar button on the left edge of the player and drag to

the right.

Player

List of available stations

Show available frequency ranges

After selecting a frequency range, the desired station must

still be selected.

Select frequency range

After selecting a frequency range, the last station to be

played in the respective frequency range is set.

Station currently being played

Radio › DAB radio

113

Station stored on the presets

Function areas

The variant for changing stations is set as follows using the

The DAB transmitter emits images which are displayed in the

functional areas

information to the station

› In the menu Radio

Radio Changing the station: .

› Select the variant for switching between the stations stored

Operation

on the station buttons or the stations stored in the list of avail-

able stations.

Store the current station to a preset button for preferred sta-

tions

› To store, tap on

in the Radio menu.

Restriction

Store stations to a preset button for favourite stations from

▶ Infotainment supports digital radio reception in DAB and DAB+

the list of available stations

formats.

› To display the station list, tap on in the Radio menu.

▶ Car parks, tunnels, tall buildings or mountains can restrict radio

› Hold the line with the name of the desired station.

reception.

› Tap on or the preset button for favourite stations that you

▶ In the rear side windows, there are antennas for receiving the

want to replace.

radio signal.

Delete the stored preset button for the favourite station

Covering the panes with foils or metal-coated labels may af-

› To erase, tap on

in the Radio main menu.

fect the reception of the radio signal.

▶ To delete one preset button, tap on

▶ To delete all preset buttons, tap on and confirm the dele-

Settings

tion.

Switch traffic reception (TP) for stations on/off

SCAN function

› In the Radio main menu, tap

The function plays receivable stations of the selected frequency

range in succession for a few seconds each.

› Radio Trac program (TP) .

› Display the radio player.

Switching additional announcements of the DAB transmitter

› To Start automatic play, tap

on / off

When the function is switched on, other announcements are re-

› To End automatic play, tap

ceived as trac announcements. These include e.g. Weather

news, sports reports, financial news etc.

114

Radio › WEB radio and podcasts

› In the Radio main menu, tap

› In the list of preferred stations, tap on

at the desired

› Radio Tap Additional DAB announcements .

preset button.

› Select the desired logo.

Turn on/off radio text reception

When the function is switched on, you can see more information

To turn o the logo display, tap on in the list of available

about the content broadcast from the station to which you are

logos.

listening.

Switch adding automatic station logos on/off

› In the Radio main menu, tap

When the function is switched on, a station logo from the Info-

› Radio Radio text .

tainment memory is added when the station is stored on a pre-

set.

Display FM / DAB stations in the list of available stations

› In the Radio main menu, tap

› Radio Station display: .

› Radio Tap Automatic selection of station logos .

FM/DAB - the list shows available FM and DAB stations.

WEB radio and podcasts

Advanced setting

Overview

Switch automatic switching to a similar DAB transmitter on /

Display menu

off

› Tap on

When the function is switched on and there is signal loss from

the DAB station being listened to, Infotainment automatically

Display the player

sets another DAB station with similar content.

› Tap on

› In the Radio main menu, tap

› Press the bar button on the right

› Radio Tap Switch to a similar station if weak reception .

edge of the screen and drag to the

left.

Add the station logo

Infotainment oers the option of adding logos, which are stored

in the Infotainment memory, to the stations.

› In the menu Radio

Radio Station logos and select the desired

Close player

frequency range.

› Tap on

Or:

Skoda Enyaq (2021 year). Manual in english - page 5