|
|
› If necessary, set the required network of the data service provider. If your data provider is not available in the list, ask your provider whether one of the displayed providers can be used. The parameters of the telephone service provider network can be set in the menu item → → Network → Network settings. CAUTION If you insert a SIM card of the wrong size or in the wrong direction, there is a risk of damage to the CarStick device. Establishing a connection using a SIM card in the external module Applies to Infotainment Columbus with the SIM card slot in the external mod- ule. A SIM card size “mini” (standard size 25x15 mm) mit enabled data services must be used. › Turn on the ignition and switch on Infotainment. › In the Telephone main menu, switch on the → Business phone “interface”. › Insert a SIM card into the corresponding slot into the external module in the storage compartment on the passenger's side Insert the SIM card with the bevelled corner on the left and the contacts facing downwards until it “locks”. › Select the SIM card usage type: Calls too - enabling data and telephone services. › If the SIM card is protected by a PIN code, then the PIN code of the SIM card must be entered. › Confirm the entered PIN code by tapping confirm. › or: Tap the functional surface to save and confirm the PIN code. › Set the data service provider’s required network and confirm the Internet connection. If your data provider is not available in the list, ask your provider whether one of the displayed providers can be used. The parameters of the telephone service provider network can be set in the menu item → → Network → Network settings. The data connection setting using the SIM card can be configured in the → → Network → Data connection:. CAUTION When inserting an incorrectly sized SIM card or in the wrong direction, there is a risk of damage to the external module. Establishing a connection using the Bluetooth ® rSAP profile Applies to Infotainment Columbus with the SIM card slot in the external mod- ule. The prerequisite for establishing an Internet connection is using a telephone with a SIM card with active data services. › Turn on the ignition and switch on Infotainment. › Switch on the “Business” function in Infotainment, the sensor field and then the function surface → → Phone interface “Business”. › Switch on Bluetooth ® , the sensor field and then the function surface → Bluetooth → Bluetooth. › Turn on Infotainment visibility (tap the sensor field and then tap the function surface → Bluetooth → Visibility: → Visible. › Switch on Bluetooth ® and its visibility in the phone. › Connect and pair the phone with Infotainment . Connecting via WLAN Introduction to the subject Applies to Infotainment Columbus, Amundsen. WLAN can be used to connect to the Internet, to playback audio files in the menu media or for operating the Infotainment system using an application in the external device (e.g. “ŠKODA Media Command”). and at the same time to connect Infotainment to another hotspot. Switching the Infotainment hotspot on/off › Switch-on the ignition. › Switch the hotspot on/off in menu item → → WLAN → Mobile hotspot → Mobile hotspot. 173 Data connection |