|
|
![]() Replacing the bulb for daytime running lights and parking lights- Variant 1 Fig. 173 Replacing the bulb for daytime running lights and parking lights Read and observe and on page 137 first. › Turn the housing containing the bulb C
on page 137 as far as the stop in the direction of the arrow 1
› Remove the housing containing the bulb in the direction of arrow 2 . › Change the bulb. › Insert the housing containing the light bulb in the lamp housing in the oppo- site direction to arrow 2 . › Screw the housing in the opposite direction to arrow 1 until it clicks into place. Change bulb for low beam and high beam - Variant 2 Fig. 174 Removing bulbs for high and main beam Read and observe and on page 137 first. › Remove the protective caps D and E
› Turn the holder with the bulb in the direction of arrow 1
› Remove the holder with the bulb in the direction of arrow 2 . › Change the bulb and insert the connector with the new bulb into the head- light in the opposite direction to the arrow 2 . › Turn the connector with the new bulb in the opposite direction to the arrow 1 until it stops. › Use the protective caps D and E Changing the bulb for the front turn signal light Fig. 175 Changing the bulb for the front turn signal light. Version 1/ver- sion 2 Read and observe and on page 137 first. › Turn the socket with the bulb to the stop in the direction of the arrow 1 . › Remove the housing containing the bulb in the direction of arrow 2 . › Unscrew the defective bulb in its housing in an anti-clockwise direction and remove it. › Place a new bulb in the housing and turn it in a clockwise direction as far as it will go. › Insert the housing containing the light bulb in the lamp housing in the oppo- site direction to arrow 2 . › Screw the housing in the opposite direction to arrow 1 until it clicks into place. 138 Do-it-yourself |