Nissan Pathfinder (2024 year). Manual in english

Maintenance

The maintenance menu allows the user to set reminders for various vehicle maintenance items.

Some menu items shown below may not be equipped on your vehicle.

WARNING

The tire replacement indicator is not a substitute for regular tire checks, including tire pressure checks. For additional informa-
tion, see “Changing wheels and tires” (P. 8-39). Many factors including tire inflation, alignment, driving habits and road conditions
affect tire wear and when tires should be replaced. Setting the tire replacement indicator for a certain driving distance does not
mean your tires will last that long. Use the tire replacement indicator as a guide only and always perform regular tire checks.
Failure to perform regular tire checks, including tire pressure checks could result in tire failure. Serious vehicle damage could
occur and may lead to a collision, which could result in serious personal injury or death.

Menu item

Explanation

Service

Allows user to reset the service interval. This should only be done after completing an oil and filter change main-
tenance. For additional information, see “Oil Control System” (P. 2-29).

Air Filter

Allows user to set a reminder at a desired interval to perform an air filter change, or reset the reminder after
completing the maintenance.

Tire

Allows user to set a reminder at a desired interval to perform a tire rotation/replacement, or reset the reminder
after completing the tire service.

Other

Allows user to set a reminder at a desired interval to perform additional maintenance items (other than oil, air
filter, or tire), or reset the reminder after completing the maintenance.

2-36

Instruments and controls

Customize Display

The customize display menu allows the user to customize the information that appears in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Main Menu Selection

Displays the available screens that can be shown in the vehicle information display.

Home

Allows user to turn the home screen on or off in the vehicle information display.

Blank

Allows user to turn the blank on or off in the vehicle information display.

Speed

Allows user to turn the speed screen on or off in the vehicle information display.

Drive Computer

Allows user to turn the drive computer screen on or off in the vehicle information display.

Fuel Economy

Allows user to turn the fuel economy screen on or off in the vehicle information display.

ECO Pedal Guide

Allows user to turn the ECO Pedal guide screen on or off in the vehicle information display.

TPMS

Allows user to turn the TPMS screen on or off in the vehicle information display.

Idling Stop

Allows user to turn the Idling stop screen on or off in the vehicle information display.

4x4–I

Allows user to turn the 4x4–I screen on or off in the vehicle information display.

Navigation

Allows user to turn the navigation screen on or off in the vehicle information display.

Audio

Allows user to turn the audio controls screen on or off in the vehicle information display.

Driving Aids

Allows user to turn the driving aids screen on or off in the vehicle information display.

Cruise

Allows user to turn the cruise control screen on or off in the vehicle information display.

Speed Limit Sign

Allows user to turn the speed limit sign screen on or off in the vehicle information display.

Route Guidance

Displays the available route guidance settings.

Alerts

Allows user to turn the alerts on or off.

Transition (Cruise)

Allows user to turn the transition (cruise) on or off.

Welcome Effect

Displays the available welcome effect settings.

Gauges

Allows user to turn the gauges effect on or off.

Animation

Allows user to turn the animation effect on or off.

Instruments and controls

2-37

Menu item

Explanation

Operation guidance

Displays the available operation guidance settings.

Lights

Allows user to turn the light mode guidance on or off.

Wiper

Displays the available wiper guidance settings.

Front

Allows user to turn the front wiper guidance on or off.

Rear

Allows user to turn the rear wiper guidance on or off.

High Beam Assist

Allows user to turn the High Beam Assist guidance on or off.

Seat Memory

Allows user to turn the seat memory guidance on or off.

Cruise Control

Allows user to turn the cruise control guidance on or off.

Unit/Language

The unit/language menu allows the user to change the units shown in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Mileage/Fuel

Displays the available mileage/fuel display units and allows user to select preferred unit for display.

Tire Pressure

Allows user to select the tire pressure display units.

Temperature

Allows user to select the temperature display units.

Language

Displays the available language options and allows user to select preferred language for display.

2-38

Instruments and controls

Key-Linked Settings (if so equipped)

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Key-Linked Settings

Allows user to turn the key-linked settings on or off. This setting is enabled individually by each key. When en-
abled, various settings in the vehicle information display and the driver position (if equipped) will return to the
same settings as the last time the linked key was used. When disabled for a key, no settings will be automati-
cally changed when that key is used. For additional information, see “Memory storage function” (P. 3-40).

Factory Reset

The factory reset menu allows the user to restore the vehicle information display settings to factory status.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Factory Reset

Allows user to reset the vehicle information display settings to the original factory settings. Once selected,
the user can confirm or cancel the reset.

Instruments and controls

2-39

VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS

The following messages may appear in
your vehicle information display.

Place the key near the start
switch

This indicator appears when the battery of
the Intelligent Key is low and when the In-
telligent Key system and the vehicle are not
communicating normally.

If this appears, touch the ignition switch
with the Intelligent Key while depressing
the brake pedal. For additional information,
see “NISSAN Intelligent Key® battery dis-
charge” (P. 5-15).

Key ID Incorrect

This warning appears when the ignition
switch is placed from the OFF position and
the Intelligent Key is not recognized by the
system. You cannot start the engine with
an unregistered key.

For additional information, see “NISSAN In-
telligent Key® system” (P. 3-7).

Key System Error: See
Owner’s Manual

After the ignition switch is placed in the ON
position, this warning appears for a period
of time and then turns off.

The Key System Error message warns of a
malfunction with the Intelligent Key sys-
tem. If the warning appears while the en-
gine is stopped, it may be impossible to
start the engine.

If the warning appears while the engine is
running, you can drive the vehicle. However,
in these cases, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.

Key Battery Low

This indicator appears when the Intelligent
Key battery is running out of power.

If this indicator appears, replace the bat-
tery with a new one. For additional infor-
mation, see “Battery replacement” (P. 8-25).

No Key Detected

This warning appears when the Intelligent
Key is left outside the vehicle with the igni-
tion switch in the ON position. Make sure
the Intelligent Key is inside the vehicle.

For additional information, see “NISSAN In-
telligent Key® system” (P. 3-7).

Brightness indicator

This indicator shows the brightness ad-
justment of the instrument panel. For addi-
tional information, see “Instrument bright-
ness control” (P. 2-91).

Caution Steep slope

This indicator appears, and a chime
sounds when the automatic brake hold
function is activated while the vehicle is on
a steep hill. Apply the foot brake to stop the
vehicle from moving. For additional infor-
mation, see “Automatic brake hold” (P. 5-28).

Chassis Control System Error See
Owner’s Manual

This warning appears if the chassis control
module detects a malfunction in the chas-
sis control system. Have the system
checked. It is recommended that you visit a
NISSAN dealer for this service. For addi-
tional information, see “Chassis Control”
(P. 5-181).

2-40

Instruments and controls

Check Rear Seat For All Articles

When the system is enabled, this message
appears when the vehicle comes to a com-
plete stop, the vehicle is transitioned from
the D (Drive) position to P (Park) position,
and the driver exits the vehicle. This mes-
sage alerts the driver, after a period of time,
to check for items in the rear seat after the
audible alert has been provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-24).

For additional information, see “Rear Door
Alert” (P. 2-107).

Rear Door Alert is activated

When the system is enabled, this message
appears when the Rear Door Alert system
is active and can remind the driver to check
the back seat.
• Using the steering wheel switch, a driver

can select “Dismiss Message” to clear the
display for a period of time. If no selection
is made, this message automatically
turns off after a period of time.

• Using the steering wheel switch, a driver

can select “Disable Alert” to disable the
horn alert for the remainder of the cur-
rent trip.

WARNING

Selecting “Dismiss Message” during a
stop within a trip temporarily dis-
misses the message for that stop with-
out turning the system off. Alerts can
be provided for other stops during the
trip. Selecting “Disable Alert” turns off
the Rear Door Alert system for the re-
mainder of a trip and no audible alert
will be provided.

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-24).

For additional information, see “Rear Door
Alert” (P. 2-107).

Door/Liftgate Open

This warning appears when a door or the
liftgate has been opened.

Drive Mode Selector indicator

When a driving mode is selected using the
Drive Mode Selector, the selected mode in-
dicator is displayed.
• SAND (4WD models)
• MUD/RUT (4WD models)
• SNOW
• STANDARD (2WD models)
• AUTO (4WD models)
• ECO
• SPORT
• TOW
For additional information, see “Drive Mode
Selector” (P. 5-31).

Headlight System Error: See Owner’s
Manual

This warning appears when there is an er-
ror with the system. For additional informa-
tion, see “Headlight and turn signal switch”
(P. 2-85).

Low Fuel

This warning appears when the fuel level in
the fuel tank is getting low. Refuel as soon
as it is convenient, preferably before the
fuel gauge reaches 0 (Empty).

There will be

a small reserve of fuel in the tank when
the fuel gauge needle reaches 0 (Empty).

Instruments and controls

2-41

Low Outside Temperature

This warning appears if the outside tem-
perature is below 37°F (3°C). The tempera-
ture can be changed to display in Celsius or
Fahrenheit. For additional information, see
“Driver Assistance” (P. 2-30).

Low Washer Fluid

This warning appears when the windshield-
washer fluid is at a low level. Add windshield-
washer fluid as necessary. For additional
information, see “Windshield-washer fluid”
(P. 8-12).

Neutral Hold Mode has been activated

This message appears when the Neutral
hold mode is activated. To exit the Neutral
hold mode, place the vehicle in any other
shift position other than N (Neutral). For
additional information, see “Neutral hold
mode function” (P. 5-23).

Neutral Hold Mode was not activated

This message appears when the Neutral
hold mode is unavailable. To activate the
Neutral hold mode, wait for a while without
shifting and then perform the operations
again. For additional information, see “Neu-
tral hold mode function” (P. 5-23).

Neutral Hold Mode guidance

This message appears after approxi-
mately 5 seconds when the shift position is
in the N (Neutral) position (Neutral hold
mode is available). For additional informa-
tion, see “Neutral hold mode function”
(P. 5-23).

Parking Sensor Error: See Owner’s
Manual

This warning appears when there is an er-
ror with the system. For additional informa-
tion, see “Front and rear sonar system”
(P. 5-184).

Power will turn off to save the battery

Under the specific conditions, this warning
may appear in the vehicle information dis-
play after a period of time if the ignition
switch is in the ON position and if the ve-
hicle is in P (Park). For additional informa-
tion, see “Push-button ignition switch posi-
tions” (P. 5-14).

Power turned off to save the battery

Under the specific conditions, this warning
may appear after the ignition switch is au-
tomatically turned off. For additional infor-
mation, see “Push-button ignition switch
positions” (P. 5-14).

Press Brake Pedal

This warning appears in the following situ-
ations:
• The driver tries to release the electronic

parking brake manually without depress-
ing the brake pedal.

Press brake pedal to
prevent rolling

This warning appears in the following situ-
ations:
• The vehicle is stopped on a steep hill and

there is a possibility of moving backward,
even if the electronic parking brake is applied.

• This warning appears and chime sounds

if the vehicle moves while the automatic
brake hold function is activated. Apply the
foot brake to stop the vehicle moving.

Press brake to operate
switch

This indicator appears if the automatic brake
hold switch is pushed without depressing the
brake pedal while the automatic brake hold
function is activated. Depress the brake pedal
and push the switch to deactivate the auto-
matic brake hold function.

For additional information, see “Automatic
brake hold” (P. 5-28).

2-42

Instruments and controls

Push brake and start
switch to drive

This indicator appears when the shift posi-
tion is in the P (Park) position.

This indicator also appears when the ve-
hicle has been started using the Remote
Engine Start (if so equipped) function.

This indicator means that the engine will
start by pushing the ignition switch with
the brake pedal depressed. You can start
the engine from any position of the ignition
switch.

Rear seat belt warning

The rear seat warning indicator will vary
depending on the seat layout of your
vehicle.

Red seat with exclamation symbol:
The corresponding seat belt is not
fastened.
Green seat with tick symbol: The cor-
responding seat belt is fastened.

• This warning includes display of the seat

belts for rear seating positions only. Rear
seat belts that are unfastened will appear
red.

• If any rear seat belts are unfastened

when the ignition switch is placed in the
ON position, this warning will display
for approximately 1 minute, or until dis-
missed by pushing the scroll dial.

• When a rear seat belt is changed from

fastened to unfastened, this warning will
display for over 1 minute, or until dis-
missed, and the seat belt warning light
will turn ON.

• If the vehicle is driven above 9 mph (15

km/h) during or after the rear passenger
seat belt buckle status change, this
warning will display, the seat belt warning
light will blink, and the chime will sound
for over 1 minute. During this time, the
warning and chime cannot be dismissed
unless the rear seat belt is fastened
again. Once the seat belt warning light
and chime have turned off, the display will
remain until dismissed.

NOTE:

•

While it appears, this message will also
display the status of all doors and
liftgate.

•

Opening and closing a rear door while
stopped will reset this warning, similar
to pushing the ignition switch to ON
again.

LIC5493

Display with rear seats only

Instruments and controls

2-43

Reminder: Turn OFF
headlights

This warning appears when the headlights
are left in the ON position when exiting the
vehicle. Place the headlight switch in the
OFF or AUTO position. For additional infor-
mation, see “Headlight and turn signal
switch” (P. 2-85).

Shipping Mode On Push Storage Fuse

This warning may appear if the extended
storage switch is not pushed in. When this
warning appears, push in the extended
storage switch to turn off the warning. For
additional information, see “Extended stor-
age switch” (P. 2-109).

Steep Slope Apply foot
brake

This indicator appears, and chime sounds
if the “Caution Steep slope” indicator has
appeared over about 3 minutes. Then the
parking brake will automatically be applied
and the brake force of the automatic brake
hold will be released, and the vehicle may
move or roll away unexpectedly. Apply the
foot brake to stop the vehicle moving.

For additional information, see “Automatic
brake hold” (P. 5-28).

Time for a break?

This indicator appears when the set time is
reached. The time can be set up to six
hours. For additional information, see “Set-
tings” (P. 2-30).

Tire Pressure Low - Add Air

This warning appears when the low tire
pressure warning light in the meter illumi-
nates and low tire pressure is detected. The
warning appears each time the ignition
switch is placed in the ON position as long
as the low tire pressure warning light re-
mains illuminated. If this warning appears,
stop the vehicle and adjust the tire pres-
sures of all four tires to the recommended
COLD tire pressure shown on the Tire and
Loading Information label. For additional
information, see “Low tire pressure warning
light” (P. 2-19) and “Tire Pressure Monitoring
System (TPMS)” (P. 5-5).

Transmission Shift Position
indicator

This indicator shows the transmission shift
position.

When parked apply parking
brake

This message appears when a malfunc-
tion occurs in the electric shift control sys-
tem below 6 mph (10 km/h).

Have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

4WD Error: See Owner’s Manual

This warning appears when the 4-Wheel
Drive (4WD) system is not functioning prop-
erly while the engine is running. Reduce
vehicle speed and have your vehicle
checked by a NISSAN dealer as soon as
possible. For additional information, see
“Intelligent 4x4 (I-4x4)” (P. 5-171).

4WD High Temp. Stop Vehicle

This warning appears when the oil tem-
perature of the powertrain parts will in-
crease due to the difference in rotation be-
tween the front and rear wheels is large
(wheel slip), such as when driving the ve-
hicle on rough roads, through sand or mud,
or freeing a stuck vehicle. If this warning is
displayed, stop the vehicle with the engine
idling, as soon as it is safe to do so. In these
cases, the 4WD changes to 2WD to protect
the powertrain parts. Then if the warning
turns off, you can continue 4WD driving.

2-44

Instruments and controls

Tire Size Incorrect See Owner’s
Manual

This warning may appear if there is a large
difference between the diameters of the
front and rear wheels. Pull off the road in a
safe area, with the engine idling. Check that
all the tire sizes, brand, construction and
tread patterns are the same, that the tire
pressure is correct and that the tires are
not excessively worn. If you have any prob-
lems, please change tires or adjust to the
correct tire pressure. Do not select the
SNOW or SAND or MUD/RUT (if so equipped)
mode with the Drive Mode Selector and do
not drive fast. For additional information,
see “Intelligent 4x4 (I-4x4)” (P. 5-171).

Automatic Emergency
Braking (AEB) with
Pedestrian Detection
emergency warning
indicator

This indicator appears along, with an au-
dible warning, when the system detects
the possibility of a forward collision.

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-138).

Blind Spot Warning
(BSW)/Intelligent Blind
Spot Intervention (I-BSI)
indicator

This indicator appears when the BSW
and/or I-BSI systems are engaged.

This indicator also appears when the I-BSI
system is unavailable.

For additional information, see “Blind Spot
Warning (BSW)” (P. 5-52) or “Intelligent Blind
Spot Intervention (I-BSI)” (P. 5-65).

Cruise control indicator

This indicator shows the cruise control sys-
tem status.

When cruise control is activated, a green
circle will illuminate to indicate it is set. The
vehicle information display will also display
the speed the cruise control was set at. If
you accelerate past the set speed, the
speed will blink until you either cancel
cruise control or go back to the set speed. If
cruise control is on and canceled, the
speed will be displayed to show the speed
the vehicle will return to if the resume but-
ton is activated.

Currently not available

This message may appear when the Pro-
PILOT Assist system, Intelligent Blind Spot
Intervention (I-BSI) or the Intelligent Lane
Intervention (I-LI) system is engaged.

Under the following conditions, the Pro-
PILOT Assist, Intelligent Blind Spot Interven-
tion (I-BSI) or the Intelligent Lane Interven-
tion (I-LI) system is automatically canceled:
• When the VDC system is turned off
• The SNOW mode or the SAND or MUD/

RUT mode is selected (4WD models).

The above system cannot be used in some
situations (VDC operates, wheel slip and
VDC system is off.)

Driver Alertness
Malfunction

This warning appears when the Intelligent
Driver Alertness (I-DA) system is not function-
ing properly. For additional information, see
“Intelligent Driver Alertness (I-DA)” (P. 5-165).

Take a Break?

This alert appears when the Intelligent
Driver Alertness (I-DA) system has de-
tected that the driver may be displaying
fatigue or a lack of attention.

Instruments and controls

2-45

Forward Driving Aids temporarily
disabled Front Sensor blocked See
Owner’s Manual

This message appears when the front ra-
dar sensor may be obstructed due to:
• mud, dirt, snow, ice, etc.
• inclement weather (rain, fog, snow, etc.).

All forward driving aids are temporarily dis-
abled until the system detects that the
front radar sensor is no longer obstructed.

For additional information, see:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection (P. 5-138)

• ProPILOT Assist (P. 5-88)
• Intelligent Forward Collision Warning (I-

FCW) (P. 5-150)

Hands on detection warning

This warning appears when the Steering
Assist system is engaged and the following
condition(s) occur:
• When not holding the steering wheel
• When

there

steering

wheel

operation

Hold onto the steering wheel immediately.
When the steering operation is detected,
the warning turns off and the Steering As-
sist function is automatically restored.

For additional information, see “ProPILOT
Assist” (P. 5-88).

Idling Stop System

This indicator shows the Idling Stop Sys-
tem status.

For addition information, see “Idling Stop
System” (P. 5-190).

Intelligent Lane
Intervention (I-LI)/
Intelligent Blind Spot
Intervention (I-BSI)/
ProPILOT Assist status
indicator

This indicator shows when the I-LI, I-BSI or
ProPILOT Assist system is engaged.

For additional information, see “Intelligent
Lane Intervention (I-LI)” (P. 5-45), “Intelligent
Blind Spot Intervention (I-BSI)” (P. 5-65) or
“ProPILOT Assist” (P. 5-88).

Lane Departure Warning
(LDW) indicator

This indicator appears when the I-LI or LDW
system is engaged.

This indicator also appears when the I-LI
system is unavailable.

For additional information, see “Intelligent
Lane Intervention (I-LI)” (P. 5-45) or “Lane
Departure Warning (LDW)” (P. 5-38).

Malfunction: See Owner’s Manual

This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly:
• Rear Automatic Braking (RAB)
• Traffic Sign Recognition (TSR)

If one or more of these warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

Malfunction

This warning appears when one or more of
the following systems (if so equipped) mal-
function:
• Rear Cross Traffic Alert (RCTA)
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Intelligent

Forward

Collision

Warning

(I-FCW)

If one or more of these warning appears,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

2-46

Instruments and controls

Not Available Bad Weather

This message may appear when the Steer-
ing Assist system is engaged.

Under the following conditions, the Steering
Assist system is automatically canceled:
• When the wiper (HI) operates.
• When lane markers in the traveling lane

cannot be correctly detected for a period
of time due to such items as a snow rut,
reflection of light on a rainy day or several
unclear lane markers are present.

If you want to use the Steering Assist sys-
tem again, cancel the ProPILOT Assist sys-
tem and set it again when lane markers are
clearly visible, or push the Steering Assist
switch once.

Not Available Front Camera
Obstructed

This message may appear when the Steer-
ing Assist system is engaged.

Under the following condition, the Steering
Assist system is automatically canceled:
• The camera area of the windshield is

fogged up or covered with dirt, water
drops, ice, snow, etc.

Not Available Parking Brake On

This message may appear when the Pro-
PILOT Assist system is engaged.

Under the following condition, the ProPILOT
Assist system is automatically canceled:
• The electronic parking brake is applied.

The above system cannot be used when
the electronic parking is activated.

For additional information, see "ProPILOT
Assist (P. 5-88) and “Parking brake” (P. 5-26).

Not Available Poor Road Conditions

This message may appear when the Pro-
PILOT Assist system, Intelligent Blind Spot
Intervention (I-BSI) or the Intelligent Lane
Intervention (I-LI) system is engaged.

Under the following conditions, the Pro-
PILOT Assist system, Intelligent Blind Spot
Intervention (I-BSI) or the Intelligent Lane
Intervention (I-LI) system is automatically
canceled:
• When the VDC system operates
• When a wheel slips

The above system cannot be used in some
situations (VDC operates, wheel slip and
VDC system is off.)

Not Available Seat Belt Not Fastened

This message may appear when the Pro-
PILOT Assist system is engaged.

Under the following condition, the ProPILOT
Assist system is automatically canceled:
• When the driver’s seat belt is not fastened

The above system cannot be used when
the driver’s seat belt is not fastened.

Not Available System Malfunction

This warning appears when one or more of
the following systems (if so equipped) is
not functioning properly.
• ProPILOT Assist
• Blind Spot Warning (BSW)
• Intelligent Blind Spot Intervention (I-BSI)
• Lane Departure Warning (LDW)
• Intelligent Lane Intervention (I-LI)

If one or more of these warnings appear,
have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

For additional information, see ProPILOT
Assist” (P. 5-88), Intelligent Blind Spot Inter-
vention (I-BSI)” (P. 5-65), “Blind Spot Warning
(BSW)” (P. 5-52), “Lane Departure Warning
(LDW)” (P. 5-38) or “Intelligent Lane Interven-
tion (I-LI)” (P. 5-45).

Instruments and controls

2-47

ProPILOT Assist indicators

These indicators show the ProPILOT Assist
system status. The status is shown by
color. For additional information, see “Pro-
PILOT Assist” (P. 5-88).

Rear Automatic Braking
(RAB) system warning
indicator

This indicator appears to indicate the sta-
tus of the Rear Automatic Braking (RAB)
system. For additional information, see
“Rear Automatic Braking (RAB)” (P. 5-131).

Press Brake Pedal

This message may appear when the Intel-
ligent Cruise Control (ICC) (with ProPILOT
Assist) system is engaged and the follow-
ing condition occurs:
• While the vehicle is stopped by the Pro-

PILOT Assist, the driver’s door is opened
but the electronic parking brake was not
activated.

Step on the brake pedal immediately.

Speed Limit Sign indicator

This message may appear when the Traffic
Sign Recognition system is engaged.

For additional information, see “Traffic Sign
Recognition (TSR)” (P. 5-35).

Steering Assist Not Available Cannot
Detect Lane

This indicator may appear when the Steer-
ing Assist system is engaged. The Steering
Assist system is automatically canceled
when the lane markers in the traveling lane
cannot be correctly detected for a period
of time due to such items as a snow rut,
reflection of light on a rainy day or several
unclear lane markers are present.

If you want to use the Steering Assist sys-
tem again, cancel the ProPILOT Assist sys-
tem and set it again when lane markers are
clearly visible, or push the Steering Assist
switch once.

Steering Assist ON

This indicator appears when the Steering
Assist system is turned on.

For additional information, see “Intelligent
Cruise Control (ICC) (for vehicles with ProPILOT
Assist” (P. 5-104) and “Steering Assist” (P. 5-120).

Steering Assist OFF

This indicator appears when the Steering
Assist system is turned off.

For additional information, see “Intelligent
Cruise Control (ICC) (for vehicles with ProPILOT
Assist” (P. 5-104) and “Steering Assist” (P. 5-120).

Only Available with Cruise
Control ON

This message appears when the Steering
Assist switch has been pushed while the
cruise control is not switched on.

For additional information, see “Intelligent
Cruise Control (ICC) (for vehicles with ProPILOT
Assist” (P. 5-104) and “Steering Assist” (P. 5-120).

Steering Assist status

This indicator appears when the Steering
Assist system is engaged.

For additional information, see “ProPILOT
Assist” (P. 5-88).

Unavailable: High Cabin Temperature

This message appears when the camera
detects an interior temperature of more
than 104°F (40°C). For additional informa-
tion, see “ProPILOT Assist” (P. 5-88), “Intelli-
gent Lane Intervention (I-LI)” (P. 5-45), “Lane

2-48

Instruments and controls

Departure Warning (LDW)” (P. 5-38) or “Intel-
ligent

Blind

Spot

Intervention

(I-BSI)”

(P. 5-65).

Unavailable Side Radar Obstruction

This message appears when the Blind
Spot Warning (BSW), Intelligent Blind Spot
Intervention (I-BSI), or Rear Cross Traffic
Alert (RCTA) systems become unavailable
because a radar blockage is detected. For
additional information, see “Blind Spot
Warning (BSW)” (P. 5-52), “Intelligent Blind
Spot Intervention (I-BSI)” (P. 5-65) or “Rear
Cross Traffic Alert (RCTA)” (P. 5-77).

Vehicle ahead detection
indicator

This indicator shows when the following
systems are engaged and have detected a
vehicle:
• Automatic Emergency Braking (AEB) with

Pedestrian Detection

• Intelligent

Forward

Collision

Warning

(I-FCW)

• ProPILOT Assist

For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian
Detection” (P. 5-138), “Intelligent Forward
Collision Warning (I-FCW)” (P. 5-150), or “Pro-
PILOT Assist” (P. 5-88).

The vehicle information display is located
to the left of the speedometer. It displays
such items as:
• Vehicle settings
• Indicators and warnings
• Information/warning messages
• Tire pressure information
• Drive computer information
• Cruise control system information
• Driving Aids (if so equipped)
• ProPILOT Assist (if so equipped)
• NISSAN Intelligent Key® operation

information

• Audio information
• Compass and navigation information

(if so equipped)

• Shift position
• Distance to empty
• Odometer/twin trip odometer
• Clock and outside temperature
• Intelligent 4x4 (if so equipped)

LIC4677

VEHICLE INFORMATION DISPLAY 12.3
INCH (31 cm) TYPE B (if so equipped)

Instruments and controls

2-49

HOW TO USE THE VEHICLE
INFORMATION DISPLAY

The vehicle information display can be
navigated using the

but-

tons and scroll dial located on the steering
wheel.

— navigate through the items

in the vehicle information display.

2. Scroll dial — Use the scroll dial to navi-

gate through the items and change or
select an item in the vehicle information
display. The scroll dial allows up or down
navigation and press to select.

3. Short cut menu button— Press this but-

ton to open a shortcut menu.

— go back to the previous menu

STARTUP DISPLAY

When the vehicle in placed in the ON posi-
tion the screens that display in the vehicle
information include:
• Active system status (if so equipped)
• Trip computer
• Fuel economy
• Distance to empty
• Tire pressure information
• Intelligent 4x4 (if so equipped)
• Navigation (if so equipped)
• Audio
• Warnings

Warnings will only display if there are any
present. For additional information on
warnings and indicators see “Vehicle infor-
mation display warnings and indicators”
(P. 2-65).

To control what items display in the vehicle
information display, see “Customize Dis-
play” (P. 2-63).

LIC4871

2-50

Instruments and controls

1. Home

The Home mode shows the following infor-
mation:
• Vehicle speed
• Navigation (if so equipped)
• Audio

The Home display will switch to the audio
source by pressing the OK button.

2. Blank

This display is a blank screen and shows no
information.

3. Drive Computer

Average fuel consumption:

The average fuel consumption shows the
average fuel consumption since the last
reset.

Average speed:

The average speed shows the average ve-
hicle speed since the last reset.

Trip odometer:

The trip odometer shows the total dis-
tance the vehicle has been driven since the
last reset.

Elapsed time:

The elapsed time shows the time since the
last reset.

The Drive computer mode has three
modes of operation. You can switch be-
tween Manual Reset1, Manual Reset2 or
Auto Refuel by pushing the scroll dial.

Manual Reset1 can be reset manually by
using the scroll dial.

Manual Reset2 can be reset manually by
using the scroll dial or will be reset auto-
matically each time the ignition switch is
placed in the OFF position (if so equipped).

Auto Refuel will be reset automatically each
time when refueling.

4. Fuel economy display

Current fuel consumption:

The Fuel economy display mode shows the
current fuel consumption.

Average fuel consumption:

The Fuel economy display mode shows the
average fuel consumption since the last
reset.

The Fuel economy display mode has three
modes of operation. You can switch be-
tween Manual Reset1, Manual Reset2 or
Auto Refuel by pushing the scroll dial.

Manual Reset1 can be reset manually by
using the scroll dial.

Manual Reset2 can be reset manually by
using the scroll dial or will be reset auto-
matically each time the ignition switch is
placed in the OFF position (if so equipped).

Auto Refuel will be reset automatically each
time when refueling.

5. Eco Pedal Guide

When the ECO mode is selected, you can
view ECO Pedal Guide function for improv-
ing fuel economy.

The ECO Pedal Guide mode has three
modes of operation. You can switch be-
tween Manual Reset1, Manual Reset2 or
Auto Refuel by pushing the scroll dial.

Manual Reset1 can be reset manually by
using the scroll dial.

Manual Reset2 can be reset manually by
using the scroll dial or will be reset auto-
matically each time the ignition switch is
placed in the OFF position (if so equipped).

Auto Refuel will be reset automatically each
time when refueling.

For additional information, see “ECO Mode”
(P. 5-33).

2-52

Instruments and controls

6. Tire Pressures

The tire pressure mode shows the pressure
of all four tires while the vehicle is driven.

With the “Tire Pres ECO advice” function ON,
when the tire pressure is getting low,
“Check

Tire

Pressures

for

Best

Fuel

Economy”

“Add

air

for

Best

Fuel

Economy” appears. For additional informa-
tion, see “ECO Mode Setting” (P. 2-59) or “Tire
Pres ECO advice” (P. 5-34).

When the “Tire Pressure Low — Add Air”
warning appears, the display can be
switched to the tire pressure mode by
pushing the scroll dial to reveal additional
details on the displayed warning.

7. Intelligent 4x4 torque
distribution display (if so
equipped)

When the Intelligent 4x4 torque distribution
display is selected, you can view the distri-
bution ratio of the transmission torque to
the front and rear wheels during driving.

8. Compass (if so equipped)

This display indicates the direction the ve-
hicle is heading.

9. Navigation (if so equipped)

When the route guidance is set in the navi-
gation system, this item shows the naviga-
tion route information.

10. Audio

The audio mode shows the status of audio
information.

11. Driver Assistance

The Driver Assistance mode shows the op-
erating condition for the following systems:
• Forward

–– Automatic Emergency Braking (AEB)

with Pedestrian Detection system

–– Intelligent Forward Collision Warning

(I-FCW)

• Lane:

–– Lane Departure Warning (LDW)
–– Intelligent Lane Intervention (I-LI)

• Blind Spot:

–– Blind Spot Warning (BSW)
–– Intelligent

Blind

Spot

Intervention

(I-BSI)

For additional information, see “Intelligent
Blind Spot Intervention (I-BSI)” (P. 5-65),
“Blind Spot Warning (BSW)” (P. 5-52), “Lane
Departure Warning (LDW)” (P. 5-38), “Auto-

matic Emergency Braking (AEB) with Pe-
destrian Detection” (P. 5-138), “Intelligent
Forward Collision Warning (I-FCW)” (P. 5-150)
or

“Intelligent

Lane

Intervention

(I-LI)”

(P. 5-45).

12. ProPILOT Assist (if so equipped)

The ProPILOT Assist mode shows operat-
ing conditions for the following systems:
• Intelligent Cruise Control (ICC)
• Steering Assist

The display will also be shown when the
ProPILOT Assist is turned on. For additional
information, see “ProPILOT Assist” (P. 5-88).

13. Traffic Sign Recognition

The Traffic Sign Recognition (TSR) system
provides the driver with information about
the most recently detected speed limit.

For additional information, see “Traffic Sign
Recognition (TSR) (P. 5-35).

14. Idling Stop System

The Idling Stop System provides the driver
with information about the amount of fuel
saved while using the system.

For additional information, see “Idling Stop
System” (P. 5-190).

Instruments and controls

2-53

CHANGING THE METER SCREEN
VIEW

Tachometer

Engine coolant temperature gauge

Personal display

Speedometer

Fuel gauge

For models with the full-screen display, the
meter screen view can be changed to ex-
pand the vehicle information display.

To change the meter screen view:

1. Press the shortcut menu button

the left side of the steering wheel. “Short-
cut Menu” appears on the vehicle infor-
mation display.

2. Select “Change Meter View” by rotating

the scroll dial

and pushing it to

change the view.

LIC4678

2-54

Instruments and controls

OIL CONTROL SYSTEM (if so
equipped)

The oil control system can be accessed in
the Maintenance portion of the vehicle in-
formation display settings.

Engine oil information informs the distance
to oil change. Never exceed one year or
10,000

miles

(16,000

km)

between

oil

change intervals for the 3.5L 6 cylinder
(VQ35DD engine model).

Display when
ignition is ON

Display timing

Action
Required

Engine Oil
Service due in
xxx miles

Remaining oil
life is less than
940 miles
(1500 km).

Plan to have
your vehicle
serviced.

Engine Oil
Service due

Remaining oil
life is 0 miles
(0 km).

Have your ve-
hicle serviced
within two
weeks or less
than 500 miles
(800 km).

The oil change interval cannot be adjusted
manually.

The distance to oil change interval is calcu-
lated depending on the driving conditions
and set automatically by the oil control sys-
tem. A reminder will be displayed when ap-
proaching the end of the service interval.

When the Factory Reset option is selected
in the vehicle information display, the oil
control system will also be reset to initial
value. Please change the engine oil when
Factory Reset is selected.

CAUTION

If the oil replacement indicator is dis-
played, change the engine oil within
two weeks or less than 500 miles (800
km).

Operating the vehicle with deteriorated
oil can damage the engine.

To reset oil control system:

1. Place the ignition switch in the ON

position.

2. Press the

and

buttons located

on the steering wheel until “Settings” dis-
plays in the vehicle information display.
Use the scroll dial to select “Mainte-
nance”. Then, press the scroll dial.

3. Select the “Service” and press the scroll

dial.

4. Press the scroll dial according to the re-

set instructions displayed at the bottom
of the “Service” maintenance screen.

For additional information, see “Mainte-
nance” (P. 2-62).

SETTINGS

The setting mode allows you to change the
information displayed in the vehicle infor-
mation display:
• VDC Setting
• Driver Assistance
• Personal Display
• Head—Up Display (if so equipped)
• ECO Mode Setting
• TPMS Setting
• Clock
• Vehicle Settings
• Maintenance
• Customize Display
• Unit/Language
• Factory Reset

Instruments and controls

2-55

VDC Setting

The VDC Setting menu allows the user to enable or disable the Vehicle Dynamic Control (VDC) system.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

System

Allows the user to turn the VDC system on or off. For additional information, see “Vehicle Dynamic Control
(VDC) system” (P. 5-177).

Driver Assistance

The driver assistance menu allows the user to change the various driving aids, parking aids and braking features.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Steering Assist

Allows user to turn the Steering Assist of the ProPILOT Assist system on or off. For additional information, see
“ProPILOT Assist” (P. 5-88).

Lane Assist

Displays available lane options.

Warning

Allows user to turn the Lane Departure Warning (LDW) system on or off. For additional information, see “Lane
Departure Warning (LDW)” (P. 5-38).

Intervention

Allows user to turn Intelligent Lane Intervention (I-LI) system on or off. For additional information, see “Intelligent
Lane Intervention (I-LI)” (P. 5-45).

Steering Vibration

Allows the user to select the strength of the steering vibration to High/Middle/Low.

Blind Spot Assist

Displays available blind spot options.

Warning

Allows user to turn the Blind Spot Warning (BSW) system on or off. For additional information, see “Blind Spot
Warning (BSW)” (P. 5-52).

Intervention

Allows user to turn the Intelligent Blind Spot Intervention (I-BSI) system on or off. For additional information, see
“Intelligent Blind Spot Intervention (I-BSI)” (P. 5-65).

2-56

Instruments and controls

Menu item

Explanation

Emergency Assist

Displays available emergency brake options.

Emergency Braking

Allows user to turn the front emergency braking system on or off. For additional information, see “Automatic
Emergency Braking (AEB) with Pedestrian Detection” (P. 5-138) and “Intelligent Forward Collision Warning (I-FCW)”
(P. 5-150).

Rear Auto Braking

Allows user to turn the rear emergency braking system on or off. For additional information, see “Rear Automatic
Braking (RAB)” (P. 5-131).

Speed Limit Sign

Allows user to turn the Speed Limit Sign on or off. For additional information, see “Traffic Sign Recognition (TSR)”
(P. 5-35).

Speed Adjust by Route

Allows user to turn the speed adjust by route feature on or off.

Spd.Limit Assist

Allows user to turn the speed limit assist to OFF, Manual or Auto.

Parking Aids

Displays available parking aids.

Moving Object

Allows user to turn the Moving Object Detection (MOD) on or off. For additional information, see “Moving Object
Detection (MOD)” (P. 4-26).

Auto Show Sonar

Allows user to auto display the sonar. For additional information, see “Front and rear sonar system” (P. 5-184).

Front Sonar

Allows user to turn the front sonar on or off.

Rear Sonar

Allows user to turn the rear sonar on or off.

Sonar Distance

Allows user to set the distance sensor range to Long/Medium/Short.

Sonar Volume

Allows the user to set the parking sensor volume to High/Medium/Low.

Rear Cross Traffic Alert

Allows user to turn the Rear Cross Traffic Alert (RCTA) system on or off. For additional information, see “Rear Cross
Traffic Alert (RCTA)” (P. 5-77).

Driver Alertness

Allows user to turn the Intelligent Driver Alertness on or off. For additional information, see “Intelligent Driver Alert-
ness (I-DA)” (P. 5-165).

Timer Alert

Allows user to set the timer alert.

Low Temp. Alert

Allows user to turn the low temperature alert on or off.

Instruments and controls

2-57

Personal Display

The Personal Display menu allows the user to set various screens in the personal display area in the vehicle information display.
Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Blank

Allows user to select the blank screen.

Navigation

Allows user to select the navigation screen.

Time to Destination

Allows user to select the time to destination screen.

Fuel Economy

Allows user to select the fuel economy screen.

Trip

Allows user to select the trip screen.

Gear position

Allows user to select the gear position screen.

Average speed

Allows user to select the average speed screen.

Head-Up Display (if so equipped)

The Head—Up Display menu allows the user to control the Head—Up Display feature.
Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Brightness

Allows user to change the brightness.

Height

Allows user to change the height.

Rotation

Allows user to change the rotation.

Contents selection

Displays the available content in the Head-Up Display.

Navigation

Allows user to turn the navigation on or off.

Driving Assist

Allows user to turn the driving assist on or off.

Speed Limit Sign

Allows user to turn the speed limit sign on or off.

Audio

Allows user to turn the audio on or off.

TEL/SMS

Allows user to turn the TEL/SMS on or off.

Reset

Allows user to reset the settings. Once selected, the user can confirm or cancel the reset.

2-58

Instruments and controls

ECO Mode Setting

The ECO mode setting menu allows the user to change the settings for the ECO mode.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

ECO Customize

Displays available ECO mode settings.

Cruise Control

Allows user to turn the cruise control ECO option on or off. For additional information, see “Cruise Control” (P. 5-87).

Idling stop

Allows user to turn the Idling Stop System (ISS) ECO option on or off. For additional information, see “Idling Stop
System” (P. 5-190).

Air Conditioning

Allows user to turn the Air Conditioning ECO option on or off. For additional information, see “ECO Customize”
(P. 5-33).

ECO Drive Assist

Displays available ECO information settings.

ECO Indicator

Allows user to turn the ECO indicator on or off.

ECO Drive Report

Allows user to turn the ECO Drive Report on or off.

View History

Displays the history report for the vehicle.

Tire Pres ECO advice

Allows user to turn the tire pressure ECO advice on or off.

TPMS Setting

The TPMS settings menu allows the user to view or change the tire pressure units displayed in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Tire Pressure Unit

Allows user to select the tire pressure units that will display in the vehicle information display.

Instruments and controls

2-59

Clock

Allows user to adjust the clock settings and time within the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Display

Allows user to turn the display on or off.

Clock Mode

Allows user to adjust the clock mode to Auto, Manual or Time Zone.

Clock Format

Allows user to adjust the clock format to 24H or 12H.

Daylight Saving

Allows user to turn on or off the daylight saving mode.

Time Zone

Allows user to select a time zone.

Set Clock Manually

Allows user to set the clock manually.

Vehicle Settings

The vehicle settings menu allows the user to change the settings for lights, wipers, locking, keys, and other vehicle settings.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Power Back Door

Allows user to turn the power back door on or off.

Lighting

Displays the available lighting options.

Welcome Headlight

Allows user to turn the welcome headlight on or off.

Auto Room Lamp

Allows user to turn the auto room lamp on or off.

Accent Lighting

Allows user to adjust the accent lighting.

Auto Headlight

Allows user to change when the lights illuminate based on the brightness outside the vehicle.

Light Off Delay

Allows user to change the duration of time that the automatic headlights stay on after the vehicle is shut off.

2-60

Instruments and controls

Menu item

Explanation

Locking

Displays the available locking options.

Ext. Door Switch

Allows user to turn the exit door switch on or off.

Selective Unlock

Allows user to turn the selective unlock feature on or off. When this item is turned on (default), only the driver’s
door is unlocked after the driver’s door unlock operation. All the doors can be unlocked if the capacitive touch
pad is pressed within 60 seconds of the door handle capacitive unlock feature. When this feature is turned off, all
the doors unlock when the drivers door unlock operation is performed once.

Auto Door Unlock

Allows the user to set the auto door unlock to Shift to P and OFF.

Horn beeps on lock

Allows the user to turn the horn beeps on lock feature on or off.

Walk Away Lock

Allows the user to turn the walk away lock function ON or OFF. For additional information, see “Walk away lock
function” (P. 3-18).

Approach Unlock

Allows the user to turn the approach unlock function ON or OFF. For additional information, see “Approach unlock
function” (P. 3-18).

Wipers

Displays the available wiper options.

Speed Dependent

Allows user to turn the speed dependent wipers on or off.

Rain Sensor

Allows user to turn the rain sensor on or off.

Reverse Link

Allows user to turn the reverse link feature on or off.

Driving Position

Displays the available driving position options.

Exit Seat Slide

When the exit seat slide is on the driver’s seat will move backward for easy exit when the ignition switch is placed
in the OFF position and the driver’s door is opened. After getting into the vehicle and placing the ignition switch in
the ON position, the driver’s seat will move to the previous set position.
For additional information, see “Memory seat” (P. 3-40).

Exit Steering Up

When the exit steering up feature is turned on, the steering wheel moves upward for easy exit when the ignition
switch is in the OFF position and the driver’s door is opened. After getting into the vehicle and placing the ignition
switch in the ON position, the steering wheel moves to the previous position.
For additional information, see “Memory seat” (P. 3-40).

Rear Door Alert

Displays the available Rear Door Alert options.

Horn & Alert

When selected, the alert is displayed; and the horn sounds.

Alert Only

When selected, only the alert is displayed.

OFF

When selected, no alert or horn will be active.

Instruments and controls

2-61

Maintenance

The maintenance menu allows the user to set reminders for various vehicle maintenance items.

Some menu items shown below may not be equipped on your vehicle.

WARNING

Menu item

Explanation

Service

Allows user to reset the service interval. This should only be done after completing an oil and filter change main-
tenance. For additional information, see “Oil Control System” (P. 2-29).

Air Filter

Allows user to set a reminder at a desired interval to perform an air filter change, or reset the reminder after
completing the maintenance.

Tire

Allows user to set a reminder at a desired interval to perform a tire rotation/replacement, or reset the reminder
after completing the tire service.

Other

Allows user to set a reminder at a desired interval to perform additional maintenance items (other than oil, air
filter, or tire), or reset the reminder after completing the maintenance.

2-62

Instruments and controls

Customize Display

The customize display menu allows the user to customize the information that appears in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Main Menu Selection

Displays the available screens that can be shown in the vehicle information display.

Home

Allows user to turn the home screen on or off in the vehicle information display.

Blank

Allows user to turn the blank on or off in the vehicle information display.

Drive Computer

Allows user to turn the drive computer screen on or off in the vehicle information display.

Fuel Economy

Allows user to turn the fuel economy screen on or off in the vehicle information display.

TPMS

Allows user to turn the TPMS screen on or off in the vehicle information display.

4x4–I

Allows user to turn the 4x4–I screen on or off in the vehicle information display.

Idling Stop

Allows user to turn the Idling stop screen on or off in the vehicle information display.

Compass

Allows user to turn the compass screen on or off in the vehicle information display.

Navigation

Allows user to turn the navigation screen on or off in the vehicle information display.

Speed Limit Sign

Allows user to turn the speed limit sign screen on or off in the vehicle information display.

Audio

Allows user to turn the audio controls screen on or off in the vehicle information display.

Driving Aids

Allows user to turn the driving aids screen on or off in the vehicle information display.

Cruise

Allows user to turn the cruise control screen on or off in the vehicle information display.

Route Guidance

Displays the available route guidance settings.

Alerts

Allows user to turn the alerts on or off.

Transition (Cruise)

Allows user to turn the transition (cruise) on or off.

Welcome Effect

Displays the available welcome effect settings.

Animation

Allows user to turn the animation effect on or off.

Instruments and controls

2-63

Menu item

Explanation

Operation guidance

Displays the available operation guidance settings.

Lights

Allows user to turn the light mode guidance on or off.

Wiper

Displays the available wiper guidance settings.

Front

Allows user to turn the front wiper guidance on or off.

Rear

Allows user to turn the rear wiper guidance on or off.

High Beam Assist

Allows user to turn the High Beam Assist guidance on or off.

Seat Memory

Allows user to turn the seat memory guidance on or off.

Cruise Control

Allows user to turn the cruise control guidance on or off.

Unit/Language

The unit/language menu allows the user to change the units shown in the vehicle information display.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Mileage/Fuel

Displays the available mileage/fuel display units and allows user to select preferred unit for display.

Tire Pressure

Allows user to select the tire pressure display units.

Temperature

Allows user to select the temperature display units.

Language

Displays the available language options and allows user to select preferred language for display.

Factory Reset

The factory reset menu allows the user to restore the vehicle information display settings to factory status.

Some menu items shown below may not be equipped on your vehicle.

Menu item

Explanation

Factory Reset

Allows user to reset the vehicle information display settings to the original factory settings. Once selected,
the user can confirm or cancel the reset.

2-64

Instruments and controls

VEHICLE INFORMATION DISPLAY
WARNINGS AND INDICATORS

The following messages may appear in
your vehicle information display.

Place the key near the start
switch

This indicator appears when the battery of
the Intelligent Key is low and when the In-
telligent Key system and the vehicle are not
communicating normally.

If this appears, touch the ignition switch
with the Intelligent Key while depressing
the brake pedal. For additional information,
see “NISSAN Intelligent Key® battery dis-
charge” (P. 5-15).

Key ID Incorrect

This warning appears when the ignition
switch is placed from the OFF position and
the Intelligent Key is not recognized by the
system. You cannot start the engine with
an unregistered key.

For additional information, see “NISSAN In-
telligent Key® system” (P. 3-7).

Key System Error: See
Owner’s Manual

After the ignition switch is placed in the ON
position, this warning appears for a period
of time and then turns off.

The Key System Error message warns of a
malfunction with the Intelligent Key sys-
tem. If the warning appears while the en-
gine is stopped, it may be impossible to
start the engine.

If the warning appears while the engine is
running, you can drive the vehicle. However,
in these cases, have the system checked. It
is recommended that you visit a NISSAN
dealer for this service.

Key Battery Low

This indicator appears when the Intelligent
Key battery is running out of power.

If this indicator appears, replace the bat-
tery with a new one. For additional infor-
mation, see “Battery replacement” (P. 8-25).

No Key Detected

This warning appears when the Intelligent
Key is left outside the vehicle with the igni-
tion switch in the ON position. Make sure
the Intelligent Key is inside the vehicle.

For additional information, see “NISSAN In-
telligent Key® system” (P. 3-7).

Automatic brake hold
indicator light
(white/green)

The automatic brake hold indicator light
(white) illuminates when the automatic
brake hold system is on standby.

The automatic brake hold indicator light
(green) illuminates when the automatic
brake hold system is operating.

For additional information, see “Automatic
brake hold” (P. 5-28).

Brightness indicator

This indicator shows the brightness ad-
justment of the instrument panel. For addi-
tional information, see “Instrument bright-
ness control” (P. 2-91).

Caution Steep slope

Instruments and controls

2-65

Chassis Control System Error See
Owner’s Manual

Check Rear Seat For All Articles

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-24).

For additional information, see “Rear Door
Alert” (P. 2-107).

Rear Door Alert is activated

When the system is enabled, this message
appears when the Rear Door Alert system
is active and can remind the driver to check
the back seat.
• Using the steering wheel switch, a driver

can select “Dismiss Message” to clear the
display for a period of time. If no selection
is made, this message automatically
turns off after a period of time.

• Using the steering wheel switch, a driver

can select “Disable Alert” to disable the
horn alert for the remainder of the cur-
rent trip.

WARNING

NOTE:

This system is disabled until a driver en-
ables it using the vehicle information
display. For additional information, see
“How to use the vehicle information dis-
play” (P. 2-24).

For additional information, see “Rear Door
Alert” (P. 2-107).

Door/Liftgate Open

This warning appears when a door or the
liftgate has been opened.

Drive Mode Selector indicator

For additional information, see “Drive Mode
Selector” (P. 5-31).

2-66

Instruments and controls

Electric shift control
system indicator

This indicator appears when a malfunction
occurs in the electric shift control system.
When the master warning indicator ap-
pears, the chime sounds and the following
message is displayed in the vehicle infor-
mation display: “When parked apply park-
ing brake”.

When the ignition is placed in the OFF posi-
tion, the chime sounds continuously. En-
sure the parking brake is applied

Have the system checked. It is recom-
mended that you visit a NISSAN dealer for
this service.

Front fog light indicator
(green)

The front fog light indicator appears when
the front fog lights are on. For additional
information, see “Fog light switch” (P. 2-92).

Headlight System Error: See Owner’s
Manual

This warning appears when there is an er-
ror with the system. For additional informa-
tion, see “Headlight and turn signal switch”
(P. 2-85).

High Beam Assist indicator
(green)

This indicator appears when the head-
lights come on while the headlight switch
is in the AUTO position with the high beams
selected and the engine running. This indi-
cates

that

the

high

beam

assist

operational.

For additional information, see “Headlight
and turn signal switch” (P. 2-85).

High beam indicator (blue)

This blue indicator appears when the
headlight high beams are on and goes out
when the low beams are selected.

The high beam indicator also appears
when the passing signal is activated.

Hill descent control system
ON indicator

When the ignition switch is placed in the ON
position, this indicator appears briefly and
then turns off.

The indicator appears when the hill de-
scent control system is activated.

If the hill descent control switch is on and
the indicator blinks, the system is not
engaged.

If the indicator does not appear when the
hill descent switch is on, the system may
not be functioning properly. Have the sys-
tem checked. It is recommended that you
visit a NISSAN dealer for this service.

For additional information, see “Hill descent
control switch” (P. 2-97) “Hill descent control
system” (P. 5-182).

Low Fuel

This warning appears when the fuel level in
the fuel tank is getting low. Refuel as soon
as it is convenient, preferably before the
fuel gauge reaches 0 (Empty).

There will be

a small reserve of fuel in the tank when
the fuel gauge needle reaches 0 (Empty).

Engine oil pressure
warning indicator

This indicator warns of low engine oil pres-
sure. If the indicator flickers or comes on
during normal driving, pull off the road in a
safe area, stop the engine

immediately

and call a NISSAN retailer or other autho-
rized repair shop.

The engine oil pressure warning indica-
tor is not designed to indicate a low oil
level.

Use the dipstick to check the oil level.

For additional information, see “Engine oil”
(P. 8-7 ).

Instruments and controls

2-67

Nissan Pathfinder (2024 year). Manual in english - page 5