Content .. 11 12 13 14 ..

Nissan Sentra (2019 year). Instruction - part 13

HOW TO TURN ON AND OFF
PREDICTED COURSE LINES (if so
equipped)

To toggle ON and OFF the predicted course
lines while in the P (Park) position:

1. Touch the “Settings” key.

2. Touch the “Camera” key.

3. Touch the “Predicted Course Lines” key

to turn the feature ON or OFF.

REARVIEW MONITOR SYSTEM
LIMITATIONS

WARNING

Listed below are the system limitations
for RearView Monitor. Failure to operate
the vehicle in accordance with these
system limitations could result in seri-
ous injury or death.

∙ The system cannot completely elimi-

nate blind spots and may not show
every object.

∙ Underneath the bumper and the cor-

ner areas of the bumper cannot be
viewed on the RearView Monitor be-
cause of its monitoring range limita-
tion. The system will not show small
objects below the bumper, and may
not show objects close to the bumper
or on the ground.

∙ Objects viewed in the RearView Moni-

tor differ from actual distance be-
cause a wide-angle lens is used.

∙ Objects in the RearView Monitor will

appear visually opposite compared to
when viewed in the rearview and out-
side mirrors.

∙ Use the displayed lines as a reference.

The lines are highly affected by the
number of occupants, fuel level, ve-
hicle position, road conditions and
road grade.

∙ Make sure that the liftgate is securely

closed when backing up.

∙ Do not put anything on the rearview

camera. The rearview camera is in-
stalled above the license plate.

∙ When washing the vehicle with high

pressure water, be sure not to spray it
around the camera. Otherwise, water
may enter the camera unit causing
water condensation on the lens, a
malfunction, fire or an electric shock.

∙ Do not strike the camera. It is a preci-

sion instrument. Otherwise, it may
malfunction or cause damage result-
ing in a fire or an electric shock.

The following are operating limitations and
do not represent a system malfunction:

∙ When the temperature is extremely

high or low, the screen may not clearly
display objects.

∙ When strong light directly shines on the

camera, objects may not be displayed
clearly.

∙ Vertical lines may be seen in objects on

the screen. This is due to strong re-
flected light from the bumper.

∙ The screen may flicker under fluores-

cent light.

∙ The colors of objects on the RearView

Monitor may differ somewhat from the
actual color of objects.

4-14

Monitor, climate, audio, phone and voice recognition systems

∙ Objects on the monitor may not be

clear in a dark environment.

∙ There may be a delay when switching

between views.

∙ If dirt, rain or snow accumulate on the

camera, the RearView Monitor may not
display objects clearly. Clean the cam-
era.

∙ Do not use wax on the camera lens.

Wipe off any wax with a clean cloth
dampened with a diluted mild cleaning
agent, then wipe with a dry cloth.

SYSTEM MAINTENANCE

CAUTION

∙ Do not use alcohol, benzine or thinner

to clean the camera. This will cause
discoloration.

∙ Do not damage the camera as the

monitor screen may be adversely
affected.

If dirt, rain or snow accumulates on the
camera

䊊

, the RearView Monitor may not

display objects clearly. Clean the camera
by wiping it with a cloth dampened with a
diluted mild cleaning agent and then wip-
ing it with a dry cloth.

LHA3819

Monitor, climate, audio, phone and voice recognition systems

4-15

Adjust air flow direction by moving the vent
slides.

Open or close the vents by using the dial.
Move the dial toward the

to open the

vents or toward the

to close them.

WARNING

∙ The air conditioner cooling function op-

erates only when the engine is running.

∙ Do not leave children or adults who

would normally require the assis-
tance of others alone in your vehicle.
Pets should also not be left alone.
They could accidentally injure them-
selves or others through inadvertent
operation of the vehicle. Also, on hot,
sunny days, temperatures in a closed
vehicle could quickly become high
enough to cause severe or possibly
fatal injuries to people or animals.

∙ Do not use the recirculation mode for

long periods as it may cause the inte-
rior air to become stale and the win-
dows to fog up.

NOTE:

∙ Odors from inside and outside the ve-

hicle can build up in the air conditioner
unit. Odor can enter the passenger
compartment through the vents.

∙ When parking, set the heater and air

conditioner controls to turn off air re-
circulation to allow fresh air into the
passenger compartment. This should
help reduce odors inside the vehicle.

LHA4299

VENTS

HEATER (manual) (if so equipped)

4-16

Monitor, climate, audio, phone and voice recognition systems

Fan speed control dial / sys-

tem OFF dial

Air flow control buttons

Temperature control dial

Air recirculation button

Rear window and outside mir-

ror defroster switch

Front windshield defroster

button

CONTROLS

Fan speed control dial

The

fan speed control dial turns the

fan on and off and controls fan speed.

Air flow control buttons

The air flow control buttons allow you to
select the air flow outlets.

— Air flows from center and side

vents.

— Air flows from center and side

vents and the front and rear
floor outlets.

— Air flows mainly from the front

and rear floor outlets.

— Air flows from defroster outlets

and the front and rear floor
outlets.

— Air flows mainly from defroster

outlets.

Temperature control dial

The temperature control dial allows you to
adjust the temperature of the outlet air. To
lower the temperature, turn the dial to the
left. To increase the temperature, turn the
dial to the right.

LHA4253

Monitor, climate, audio, phone and voice recognition systems

4-17

Air recirculation button

On position (Indicator light on):
Interior air is recirculated inside the vehicle.

Press the

button to the ON position

when:

∙ driving on a dusty road.

∙ to prevent traffic fumes from entering

passenger compartment.

Off position (Indicator light off):
Outside air is drawn into the passenger
compartment and distributed through the
selected outlet.
Use the OFF position for normal heater op-
eration.

Rear window and outside mirror
defroster switch

For additional information, refer to “Rear
window and outside mirror (if so equipped)
defroster switch” in the “Instruments and
controls” section of this manual.

HEATER OPERATION
Heating

This mode is used to direct heated air to
the foot outlets. Some air also flows from
the defrost outlets and the side vent out-
lets.

1. Press the

button to the OFF posi-

tion for normal heating.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to

the desired position between the
middle and the hot position.

Ventilation

This mode directs outside air to the side
and center vents.

1. Press the

button to the OFF posi-

tion.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to

the desired position.

Defrosting or defogging

This mode directs the air to the defrost
outlets to defrost/defog the windows.

1. Press the

defrost/defog button.

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to

the

desired

position

between

the

middle and the hot position.

∙ To quickly remove ice or fog from the

windows, turn the

fan control dial

to the highest setting and the tempera-
ture control to the full HOT position.

Bi-level heating

The bi-level mode directs warmed air to
the side and center vents and to the front
and rear floor outlets.

1. Press the

button to the OFF posi-

tion.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to

the desired position.

4-18

Monitor, climate, audio, phone and voice recognition systems

Heating and defogging

This mode heats the interior and defogs
the windshield.

1. Press the

air flow control button.

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to

the

desired

position

between

the

middle and the hot position.

Operating tips

Clear snow and ice from the wiper blades
and air inlet in front of the windshield.
This improves heater operation.

AIR FLOW CHARTS

The following charts show the button and
dial positions for MAXIMUM AND QUICK
heating, defrosting or defogging. The air
recirculation button should always be in
the OFF position for heating and defrost-
ing.

LHA4400

Monitor, climate, audio, phone and voice recognition systems

4-19

LHA4401

LHA4402

4-20

Monitor, climate, audio, phone and voice recognition systems

LHA4403

Monitor, climate, audio, phone and voice recognition systems

4-21

WARNING

∙ The air conditioner cooling function

operates only when the engine is
running.

∙ Do not leave children or adults who

∙ Do not use the recirculation mode for

long periods as it may cause the inte-
rior air to become stale and the win-
dows to fog up.

NOTE:

∙ Odors from inside and outside the ve-

hicle can build up in the air condi-
tioner unit. Odor can enter the pas-
senger compartment through the
vents.

∙ When parking, set the heater and air

conditioner controls to turn off air re-
circulation to allow fresh air into the
passenger compartment. This should
help reduce odors inside the vehicle.

HEATER AND AIR CONDITIONER
(manual) (if so equipped)

4-22

Monitor, climate, audio, phone and voice recognition systems

Fan speed control dial / sys-

tem OFF dial / A/C (air conditioner)
button

Air flow control buttons

Temperature control dial / MAX A/C
button

Air recirculation button

Rear window and outside mir-

ror (if so equipped) defroster
switch

Front windshield defroster

button

CONTROLS

Fan speed control dial

The

fan speed control dial turns the

fan on and off, and controls fan speed.

Air flow control buttons

The air flow control buttons allow you to
select the air flow outlets.

MAX
A/C

— Air flows from center and side

vents with maximum cooling.

— Air flows from center and side

vents.

— Air flows from center and side

vents and foot outlets.

— Air flows mainly from foot

outlets.

— Air flows from defroster out-

lets and foot outlets.

— Air flows mainly from de-

froster outlets.

Temperature control dial

The temperature control dial allows you to
adjust the temperature of the outlet air. To
lower the temperature, turn the dial to the
left. To increase the temperature, turn the
dial to the right.

LHA2243

Monitor, climate, audio, phone and voice recognition systems

4-23

Air recirculation button

ON position (Indicator light on):
Interior air is recirculated inside the vehicle.

Press the

button to the ON position

when:

∙ driving on a dusty road.

∙ to prevent traffic fumes from entering

passenger compartment.

∙ for maximum cooling when using the

air conditioner.

The air recirculation function does not op-

erate when in the

air flow

modes.
OFF position (Indicator light off):
Outside air is drawn into the passenger
compartment and distributed through the
selected outlet.

Use the OFF position for normal heater or
air conditioner operation.

A/C (air conditioner) button

Start the engine, press the

fan speed

control buttons to the desired position and
press the

button to turn on the air

conditioner. To turn off the air conditioner,
press the

button again.

The air conditioner cooling function op-
erates only when the engine is running.

Rear window and outside mirror
(if so equipped) defroster switch

For additional information, refer to “Rear
window and outside mirror (if so equipped)
defroster switch” in the “Instruments and
controls” section of this manual.

HEATER OPERATION

Heating

This mode is used to direct heated air to
the foot outlets. Some air also flows from
the defrost outlets and the side vent out-
lets.

1. Press the

button to the OFF posi-

tion for normal heating.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to

the desired position between the
middle and the hot position.

Ventilation

This mode directs outside air to the side
and center vents.

1. Press the

button to the OFF posi-

tion.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to

the desired position.

Defrosting or defogging

This mode directs the air to the defrost
outlets to defrost/defog the windows.

1. Press the defrost/defog button

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to

the

desired

position

between

the

middle and the hot position.

∙ To quickly remove ice or fog from the

windows, turn the

fan speed con-

trol dial to the highest setting and the
temperature control to the full HOT po-
sition.

4-24

Monitor, climate, audio, phone and voice recognition systems

∙ When the

position is selected, the

air conditioner automatically turns on if
the outside temperature is more than
36°F (2°C). This dehumidifies the air
which helps defog the windshield.
The

mode automatically turns off,

allowing outside air to be drawn into the
passenger compartment to further im-
prove the defogging performance. The
recirculation mode cannot be activated
in the

position.

Bi-level heating

The bi-level mode directs warmed air to
the side and center vents and to the front
and rear floor outlets.

1. Press the

button to the OFF posi-

tion.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Turn the temperature control dial to

the desired position.

Heating and defogging

This mode heats the interior and defogs
the windshield.

1. Press the

air flow control button.

2. Turn the

fan speed control dial to

the desired position.

3. Turn the temperature control dial to

the

desired

position

between

the

middle and the hot position.

∙ When the

position is selected, the

air conditioner automatically turns on if
the outside temperature is more than
36°F (2°C). This dehumidifies the air
which helps defog the windshield.
The

mode automatically turns off,

allowing outside air to be drawn into the
passenger compartment to further im-
prove the defogging performance.

Operating tips

Clear snow and ice from the wiper blades
and air inlet in front of the windshield.
This improves heater operation.

AIR CONDITIONER OPERATION

Start the engine, turn the

fan speed

control dial to the desired position, and
press the

button to activate the air

conditioner. When the air conditioner is on,
cooling and dehumidifying functions are
added to the heater operation.
The air conditioner cooling function op-
erates only when the engine is running.

Cooling

This mode is used to cool and dehumidify
the air.

1. Press the

button to the OFF posi-

tion.

2. Press the

air flow control button.

3. Turn the

fan speed control dial to

the desired position.

4. Press the

button.

5. Turn the temperature control dial to

the desired position.

∙ For quick cooling when the outside

temperature is high, press the
button to the ON position. Be sure to
return the

to the OFF position for

normal cooling. MAX A/C may be used
for quick cooling.

Dehumidified heating

This mode is used to heat and dehumidify
the air.

1. Press the

button to the OFF posi-

tion.

2. Press the

air flow control button.

Monitor, climate, audio, phone and voice recognition systems

4-25

3. Turn the

fan speed control dial to

the desired position.

4. Press the

button.

5. Turn the temperature control dial to

the desired position.

Dehumidified defogging

This mode is used to defog the windows
and dehumidify the air.

1. Press the

air flow control button.

2. Turn the

fan speed control dial to

the desired position.

∙ When the

are selected,

the air conditioner automatically turns
on if the outside temperature is more
than 36°F (2°C). This dehumidifies the air
which helps defog the windshield.
The

mode automatically turns off,

allowing outside air to be drawn into the
passenger compartment to further im-
prove the defogging performance.

∙ The air conditioner is always on in

mode, regardless of whether the indica-
tor light is on or off.

3. Turn the temperature control dial to

the desired position.

Operating tips

∙ Keep

the

windows

and

moonroof

closed while the air conditioner is in op-
eration.

∙ After parking in the sun, drive for 2 or

3 minutes with the windows open to
vent hot air from the passenger com-
partment. Then, close the windows.
This allows the air conditioner to cool
the interior more quickly.

∙ The air conditioning system should

operated

for

approximately

10 minutes at least once a month.
This helps prevent damage to the
system due to lack of lubrication.

∙ A visible mist may be seen coming from

the ventilators in hot, humid conditions
as the air is cooled rapidly. This does not
indicate a malfunction.

∙ If the engine coolant temperature

gauge indicates engine coolant tem-
perature over the normal range, turn
the air conditioner off. For additional
information, refer to “If your vehicle
overheats” in the “In case of emer-
gency” section of this manual.

AIR FLOW CHARTS

The following charts show the button and
dial positions for MAXIMUM AND QUICK
heating, cooling or defrosting. The air re-
circulation button should always be in
the OFF position for heating and defrost-
ing.

4-26

Monitor, climate, audio, phone and voice recognition systems

LHA4404

LHA4405

Monitor, climate, audio, phone and voice recognition systems

4-27

LHA4504

LHA4505

4-28

Monitor, climate, audio, phone and voice recognition systems

LHA4775

Monitor, climate, audio, phone and voice recognition systems

4-29

Content .. 11 12 13 14 ..