|
|
DOOR MIRROR MIR-21 < DISASSEMBLY AND ASSEMBLY > C D E F G H I J K M A B MIR N O P 3. Remove the mirror glass and holder (1) from the mirror housing assembly (2). 4. Disconnect the two terminals from the mirror heater connector (if equipped). Assembly INFOID:0000000004205295 1. Place mirror glass and holder and mirror housing assembly (actuator) in a horizontal position. the mirror motor (2) Then press the lower side of mirror face until a click sound is heard to engage the lower tabs. NOTE: After installation, visually make sure lower two tabs are securely engaged from the bottom of mirror face. Make sure to insert the harness terminals into the correct con- nector. Do not confuse the locations. DOOR MIRROR COVER INFOID:0000000004499026 1. Using a suitable tool disengage the upper mirror cover pawls. 2. Using a suitable tool disengage the lower mirror cover pawls and remove mirror cover. CAUTION: Be careful not to damage the mirror or mirror cover with tool. DOOR MIRROR COVER : Assembly INFOID:0000000004499027 Installation is in the reverse order of removal. CAUTION: After installation, check that pawls are securely engaged. ALKIA0075GB ALKIA0078GB Pawl ALLIA0895ZZ |