|
|
MA-30 < ON-VEHICLE MAINTENANCE > CHASSIS AND BODY MAINTENANCE 6. Pull out the CVT fluid level gauge from the CVT fluid charging pipe after pressing the tab on the CVT fluid level gauge to release the lock. 7. Wipe fluid off the CVT fluid level gauge. Insert the CVT fluid level gauge rotating 180 ° from the originally installed position, then securely push the CVT fluid level gauge until it meets the top end of the CVT fluid charging pipe. CAUTION: When wiping away the CVT fluid level gauge, always use lint-free paper, not a cloth rag. 8. Place the selector lever in “P” or “N” and make sure the fluid level is within the specified range. CAUTION: When reinstalling CVT fluid level gauge, insert it into the CVT fluid charging pipe and rotate it to the original installa- tion position until it is securely locked. CVT FLUID CONDITION Check CVT fluid condition. • If CVT fluid is very dark or smells burned, check operation of CVT. Flush cooling system after repair of CVT. • If CVT fluid contains frictional material (clutches, brakes, etc.), replace radiator and flush cooler line using cleaning solvent and compressed air after repair of CVT. Refer to . SCIA1933E SCIA1931E SCIA1932E Fluid status Conceivable cause Required operation Varnished (viscous Clutch, brake Replace the CVT fluid and check the Milky white or Water in the fluid Replace the CVT fluid and check for Large amount of Unusual wear of Replace the CVT fluid and check for ATA0022D |