Nissan Altima L32. Manual - part 815

HAC-34

< COMPONENT DIAGNOSIS >

[AUTOMATIC AIR CONDITIONER]

AIR MIX DOOR MOTOR

AIR MIX DOOR MOTOR

Description

INFOID:0000000004498205

SYSTEM DESCRIPTION

Component Parts

Air mix door control system components are:

• Front air control

• Air mix door motors (LCU)

• In-vehicle sensor

• Ambient sensor

• Sunload sensor

• Intake sensor

System Operation

The front air control receives data from each of the sensors. The front air control sends air mix door, mode

door and intake door motor opening angle data to the air mix door motors LCU, mode door motor LCU and

intake door motor LCU.

The air mix door motor, mode door motor and intake door motor read their respective signals according to the

address signal. Opening angle indication signals received from the front air control and each of the motor posi-

tion sensors are compared by the LCUs in each motor with the existing decision and opening angles. Subse-

quently, HOT/COLD or DEFROST/VENT or FRESH/RECIRCULATION operation is selected. The new

selection data is returned to the front air control.

Air Mix Door Control Specification

COMPONENT DESCRIPTION

Air Mix Door Motor

AWIIA0023ZZ

WJIA0887E

AIR MIX DOOR MOTOR

HAC-35

< COMPONENT DIAGNOSIS >

[AUTOMATIC AIR CONDITIONER]

C

D

E

F

G

H

J

K

L

M

A

B

HAC

N

O

P

The air mix door motors LH (1) RH (2) are attached to the heater &

cooling unit assembly. They rotates so that the air mix door is

opened or closed to a position set by the front air control. Motor rota-

tion is then conveyed through a shaft and the air mix door position

feedback is then sent to the front air control by PBR built-in air mix

door motor.

Diagnosis Procedure

INFOID:0000000004498206

SYMPTOM:

• Discharge air temperature does not change.

• Air mix door motor does not operate.

INSPECTION FLOW

1.

 CONFIRM SYMPTOM BY PERFORMING OPERATION CHECK - TEMPERATURE INCREASE

1. Turn the temperature control dial (LH) clockwise until 32

°C (90°F) is displayed. 

2. Check for hot air at discharge air outlets.

>> GO TO 2

2.

 CONFIRM SYMPTOM BY PERFORMING OPERATION CHECK - TEMPERATURE DECREASE

1. Turn the temperature control dial (LH) counterclockwise until 18

°C (60°F) is displayed. 

2. Check for cold air at discharge air outlets.
Can a symptom be duplicated?

YES

>> GO TO 4

 NO

>> GO TO 3

3.

 PERFORM COMPLETE OPERATIONAL CHECK

Perform a complete operational check and check for any symptoms. Refer to 

HAC-5, "Description and Condi-

tions"

.

Is the inspection result normal?

YES

>> Refer to 

HAC-83, "Symptom Matrix Chart"

.

NO

>> System OK. 

4.

 CHECK FOR SERVICE BULLETINS

Check for any service bulletins.

AWIIA0024ZZ

AWIIA0025ZZ

HAC-36

< COMPONENT DIAGNOSIS >

[AUTOMATIC AIR CONDITIONER]

AIR MIX DOOR MOTOR

>> GO TO 5

5.

 CHECK AIR MIX DOOR MOTOR OPERATION

Check and verify air mix door mechanism for smooth operation.
Is the inspection result normal?

YES

>> GO TO 6

NO

>> Repair as necessary.

6.

 CHECK LAN SYSTEM CIRCUIT

Perform diagnostic procedure for the LAN system. Refer to 

HAC-28, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 7

NO

>> Repair as necessary. 

7.

 CHECK AMBIENT SENSOR CIRCUIT

Perform diagnostic procedure for the mode door motor. Refer to 

HAC-32, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 8

NO

>> Repair as necessary.

8.

 CHECK IN-VEHICLE SENSOR CIRCUIT

Perform diagnostic procedure for the in-vehicle sensor circuit. Refer to 

HAC-53, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 9

NO

>> Repair as necessary.

9.

 CHECK SUNLOAD SENSOR CIRCUIT

Perform diagnostic procedure for the sunload sensor circuit. Refer to 

HAC-56, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 10

NO

>> Repair as necessary.

10.

 CHECK INTAKE SENSOR CIRCUIT

Perform diagnostic procedure for the intake sensor circuit. Refer to 

HAC-59, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 11

NO

>> Repair as necessary.

11.

 CHECK AIR MIX DOOR MOTOR PBR CIRCUIT

Perform diagnostic procedure for the intake sensor circuit. Refer to 

HAC-35, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 12

NO

>> Repair as necessary.

12.

 RECHECK FOR SYMPTOMS 

Perform a complete operational check and check for any symptoms. Refer to 

HAC-5, "Description and Condi-

tions"

.

Does another symptom exist?

YES

>> Repair as necessary.

NO

>> Replace front air control. Refer to 

VTL-8, "Removal and Installation"

.

DIAGNOSIS PROCEDURE FOR AIR MIX DOOR MOTOR

SYMPTOM: Discharge air temperature does not change.

Perform diagnosis procedure. Refer to 

HAC-28, "Diagnosis Procedure"

.

INTAKE DOOR MOTOR

HAC-37

< COMPONENT DIAGNOSIS >

[AUTOMATIC AIR CONDITIONER]

C

D

E

F

G

H

J

K

L

M

A

B

HAC

N

O

P

INTAKE DOOR MOTOR

Description

INFOID:0000000004498207

SYSTEM DESCRIPTION

Component Parts

Intake door control system components are:

• Front air control

• Intake door motor (LCU)

• In-vehicle sensor

• Ambient sensor

• Sunload sensor

• Intake sensor

System Operation

The intake door control determines intake door position based on the ambient temperature, the intake air tem-

perature and the in-vehicle temperature. When shifting mode position D/F, when the DEF or OFF switches are

pressed, or when A/C switch is OFF, the front air. sets the intake door at the FRESH position.

Intake Door Control Specification

COMPONENT DESCRIPTION

Intake Door Motor

AWIIA0026GB

WJIA0888E