|
|
EM-160 < ON-VEHICLE REPAIR > [VQ35DE] FRONT TIMING CHAIN CASE 2. Install the new front oil seal on the front timing chain case. Apply new engine oil to the oil seal edges. NOTE: Install it so that each seal lip is oriented as shown. a. Install the new front oil seal so that it becomes flush with the face with front timing chain case using suitable drift. CAUTION: Press fit straight and avoid causing burrs or tilting the oil seal. NOTE: Make sure the garter spring is in position and seal lip is not inverted. 3. Apply Silicone RTV Sealant to front timing chain case as shown. • Use Genuine Silicone RTV Sealant, or equivalent. Refer to 15, "Recommended Chemical Products and Sealants" . • Before installation, wipe off the protruding sealant. • C: 2.6 - 3.6 mm (0.102 - 0.142 in) dia. 4. Install dowel pin on the rear timing chain case into dowel pin hole in front timing chain case. SEM715A PBIC0790E ALBIA0252ZZ |