|
|
EM-40 < ON-VEHICLE REPAIR > [QR25DE] ROCKER COVER 1. Apply RTV Silicone Sealant to the joint part of the cylinder head and camshaft bracket using the following steps: • Use Genuine Silicone RTV Sealant, or equivalent. Refer to . a. Follow illustration (a) to apply sealant to joint part of No.1 cam- shaft bracket and cylinder head. b. Follow illustration (b) to apply sealant in a 90 ° degree angle to the illustration (a). 2. Install the rocker cover and the new rocker cover gasket. • The rocker cover gasket must be securely installed in the groove in the rocker cover. 3. Tighten the rocker cover bolts in two steps, in the numerical order as shown. 4. Installation of the remaining components is in the reverse order of removal. WBIA0164E Step 1 : 1.96 N·m (0.20 kg-m, 17 in-lb) Step 2 : 8.33 N·m (0.85 kg-m, 74 in-lb) ALBIA0191ZZ |