|
|
P0451 EVAP CONTROL SYSTEM PRESSURE SENSOR EC-1333 < COMPONENT DIAGNOSIS > [VQ35DE] C D E F G H I J K L M A EC N P O 2. Check ground connection E9. Refer to Ground Inspection in . Is the inspection result normal? YES >> GO TO 2. NO >> Repair or replace ground connection. 2. CHECK EVAP CONTROL SYSTEM PRESSURE SENSOR CONNECTOR FOR WATER 1. Disconnect EVAP control system pressure sensor harness connector. 2. Check that water is not inside connectors. YES >> GO TO 3. NO >> Repair or replace harness connector. 3. CHECK EVAP CONTROL SYSTEM PRESSURE SENSOR POWER SUPPLY CIRCUIT 1. Turn ignition switch ON. 2. Check the voltage between EVAP control system pressure sen- sor harness connector and ground. Is the inspection result normal? YES >> GO TO 8. NO >> GO TO 4. 4. CHECK SENSOR POWER SUPPLY CIRCUIT Check harness for short to power and short to ground, between the following terminals. Is the inspection result normal? YES >> GO TO 5. NO >> Repair short to ground or short to power in harness or connectors. 5. CHECK COMPONENTS Check the following. • Crankshaft position sensor (POS) (Refer to EC-1295, "Component Inspection" .) • Refrigerant pressure sensor (Refer to EC-1503, "Diagnosis Procedure" Is the inspection result normal? YES >> GO TO 6. NO >> Replace malfunctioning components. 6. CHECK APP SENSOR EC-1450, "Component Inspection" . Is the inspection result normal? YES >> GO TO 9. NO >> GO TO 7. 7. REPLACE ACCELERATOR PEDAL ASSEMBLY 1. Replace accelerator pedal assembly. 2. Go to EC-1450, "Special Repair Requirement" EVAP control system pressure sensor Ground Voltage (V) Connector Terminal B41 3 Ground Approx. 5 PBIB0138E ECM Sensor Connector Terminal Name Connector Terminal F13 72 Refrigerant pressure sensor E219 1 76 CKP sensor (POS) F30 1 E10 87 APP sensor E40 6 91 EVAP control system pressure sensor B41 3 |