|
|
ON BOARD DIAGNOSTIC (OBD) SYSTEM EC-1161 < FUNCTION DIAGNOSIS > [VQ35DE] C D E F G H I J K L M A EC N P O VIAS S/V-1 ON/OFF • The control condition of the VIAS control solenoid valve 1 (determined by ECM according to the in- VIAS S/V-2 ON/OFF • The control condition of the VIAS control solenoid valve 2 (determined by ECM according to the in- AIR COND RLY ON/OFF • The air conditioner relay control condition (deter- mined by ECM according to the input signals) is ENGINE MOUNT IDLE/RUN • The control condition of the electronic controlled engine mount (determined by ECM according to FUEL PUMP RLY ON/OFF • Indicates the fuel pump relay control condition determined by ECM according to the input sig- VENT CONT/V ON/OFF • The control condition of the EVAP canister vent control valve (determined by ECM according to THRTL RELAY ON/OFF • Indicates the throttle control motor relay control condition determined by the ECM according to COOLING FAN HI/MID/LOW/ OFF • The control condition of the cooling fan (deter- mined by ECM according to the input signals) is HO2S2 HTR (B1) ON/OFF • Indicates [ON/OFF] condition of heated oxygen sensor 2 heater determined by ECM according to HO2S2 HTR (B2) I/P PULLY SPD rpm • Indicates the engine speed computed from the turbine revolution sensor signal. VEHICLE SPEED km/h or mph • The vehicle speed computed from the vehicle speed signal sent from TCM is displayed. IDL A/V LEARN YET/CMPLT • Displays the condition of idle air volume learning YET: Idle Air Volume Learning has not been per- ENG OIL TEMP °C or °F • The engine oil temperature (determined by the signal voltage of the engine oil temperature sen- TRVL AFTER MIL km or mile • Distance traveled while MIL is activated. A/F S1 HTR(B1) % • Air fuel ratio (A/F) sensor 1 heater control value computed by ECM according to the input signals. • The current flow to the heater becomes larger as the value increases. A/F S1 HTR(B2) Monitored item Unit Description Remarks |