|
|
P0442 EVAP CONTROL SYSTEM EC-805 < COMPONENT DIAGNOSIS > [QR25DE EXCEPT FOR CALIFORNIA] C D E F G H I J K L M A EC N P O YES >> GO TO 13. NO >> Repair or reconnect the hose. 13. CHECK EVAP CANISTER PURGE VOLUME CONTROL SOLENOID VALVE EC-810, "Component Inspection" Is the inspection result normal? YES >> GO TO 14. NO >> Replace EVAP canister purge volume control solenoid valve. 14. CHECK FUEL TANK TEMPERATURE SENSOR EC-769, "Component Inspection" Is the inspection result normal? YES >> GO TO 15. NO >> Replace fuel level sensor unit. 15. CHECK EVAP CONTROL SYSTEM PRESSURE SENSOR Is the inspection result normal? YES >> GO TO 16. NO >> Replace EVAP control system pressure sensor. 16. CHECK EVAP PURGE LINE Check EVAP purge line (pipe, rubber tube, fuel tank and EVAP canister) for cracks or improper connection. . Is the inspection result normal? YES >> GO TO 17. NO >> Repair or reconnect the hose. 17. CLEAN EVAP PURGE LINE Clean EVAP purge line (pipe and rubber tube) using air blower. >> GO TO 18. 18. CHECK EVAP/ORVR LINE Check EVAP/ORVR line between EVAP canister and fuel tank for clogging, kink, looseness and improper con- nection. For location, refer to Is the inspection result normal? YES >> GO TO 19. NO >> Repair or replace hoses and tubes. 19. CHECK RECIRCULATION LINE Check recirculation line between fuel filler tube and fuel tank for clogging, kink, cracks, looseness and improper connection. YES >> GO TO 20. NO >> Repair or replace hose, tube or fuel filler tube. 20. CHECK REFUELING EVAP VAPOR CUT VALVE EC-972, "Component Inspection" Is the inspection result normal? YES >> GO TO 21. NO >> Replace refueling EVAP vapor cut valve with fuel tank. 21. CHECK FUEL LEVEL SENSOR MWI-47, "Component Inspection" . Is the inspection result normal? YES >> GO TO 22. |