|
|
ON BOARD DIAGNOSTIC (OBD) SYSTEM EC-661 < FUNCTION DIAGNOSIS > [QR25DE EXCEPT FOR CALIFORNIA] C D E F G H I J K L M A EC N P O NOTE: ACTIVE TEST MODE Test Item BRAKE SW1 ON/OFF • Indicates [ON/OFF] condition from ASCD brake switch signal. BRAKE SW2 ON/OFF • Indicates [ON/OFF] condition of stop lamp switch signal. VHCL SPD CUT NON/CUT • Indicates the vehicle cruise condition. NON: Vehicle speed is maintained at the ASCD LO SPEED CUT NON/CUT • Indicates the vehicle cruise condition. NON: Vehicle speed is maintained at the ASCD AT OD MONITOR ON/OFF • Indicates [ON/OFF] condition of CVT O/D ac- cording to the input signal from the TCM. • For M/T models, always “OFF” is dis- played. AT OD CANCEL ON/OFF • Indicates [ON/OFF] condition of CVT O/D cancel request signal. • For M/T models, always “OFF” is dis- played. CRUISE LAMP ON/OFF • Indicates [ON/OFF] condition of CRUISE indica- tor determined by the ECM according to the input SET LAMP ON/OFF • Indicates [ON/OFF] condition of SET indicator determined by the ECM according to the input BAT CUR SEN mV • The signal voltage of battery current sensor is displayed. ALT DUTY SIG ON/OFF • The control condition of the power generation voltage variable control (determined by ECM ac- A/F ADJ-B1 — • Indicates the correction of factor stored in ECM. The factor is calculated from the difference be- ALT DUTY % • Indicates the duty ratio of the power generation command value. The ratio is calculated by ECM Monitored item Unit Description Remarks |