|
|
FUEL PUMP EC-469 < COMPONENT DIAGNOSIS > [QR25DE FOR CALIFORNIA] C D E F G H I J K L M A EC N P O 2. Also heck harness for short to power. YES >> GO TO 12. NO >> Repair open circuit or short to power in harness or connectors. 12. CHECK FUEL PUMP EC-469, "Component Inspection (Fuel Pump)" . Is the inspection result normal? YES >> GO TO 13. NO >> Replace fuel pump. 13. CHECK INTERMITTENT INCIDENT GI-42, "Intermittent Incident" . Is the inspection result normal? YES >> Replace IPDM E/R. NO >> Repair or replace harness or connectors. Component Inspection (Fuel Pump) INFOID:0000000004349531 1. CHECK FUEL PUMP 1. Turn ignition switch OFF. 2. Disconnect “fuel level sensor unit and fuel pump” harness connector. 3. Check resistance between “fuel level sensor unit and fuel pump” terminals as follows. Is the inspection result normal? YES >> INSPECTION END NO >> Replace “fuel level sensor unit and fuel pump”. Component Inspection (Condenser-1) INFOID:0000000004349532 1. CHECK CONDENSER 1. Turn ignition switch OFF. 2. Disconnect condenser-1 harness connector. 3. Check resistance between condenser-1 terminals as follows. Is the inspection result normal? YES >> INSPECTION END NO >> Replace condenser-1. Fuel level sensor unit and fuel pump Ground Continuity Connector Terminal B42 3 Ground Existed Terminals Resistance 1 and 3 0.2 - 5.0 Ω [at 25°C (77°F)] SEC918C Terminal Resistance 1 and 2 Above 1 M Ω [at 25°C (77°F)] PBIB0794E |