|
|
Content .. 1476 1477 1478 1479 ..
TM-256 < ON-VEHICLE REPAIR > [CVT: RE0F09B] CONTROL CABLE CONTROL CABLE Exploded View INFOID:0000000004201805 Removal and Installation INFOID:0000000004201806 REMOVAL 1. Shift control lever to "P". EM-25, "Removal and Installation" 3. Remove the control cable nut and control cable from the manual lever. IP-18, "Disassembly and Assembly" . 6. Remove the bracket covering the retainer grommet. INSTALLATION Installation is in the reverse order of removal. • When installing the control cable to the control device assembly, make sure that the control cable socket is fully pressed into the control device assembly, and the control cable end is fully pressed in with the ribbed surface facing upward. • After installation is complete, adjust and check the CVT position. Refer to TM-253, "Inspection and Adjust- . 1. Control lever 2. Control device assembly 3. Control cable socket 4. Retainer grommet 5. Control cable 6. Bracket 7. Lock plate 8. Manual lever ALDIA0026GB |