|
|
Content .. 1224 1225 1226 1227 ..
SEC-54 < COMPONENT DIAGNOSIS > [COUPE] B210F PNP/CLUTCH INTERLOCK SWITCH B210F PNP/CLUTCH INTERLOCK SWITCH Description INFOID:0000000004206122 IPDM E/R confirms the shift position with the following signals. • Park/neutral position (PNP) switch (CVT models) • Clutch interlock switch (M/T models) • Shift position signal from BCM (CAN) DTC Logic INFOID:0000000004206123 DTC DETECTION LOGIC NOTE: • If DTC B210F is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to • If DTC B210F is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to . DTC CONFIRMATION PROCEDURE 1. PERFORM DTC CONFIRMATION PROCEDURE 1. Turn ignition switch ON under the following conditions and wait for at least 1 second. - CVT selector lever is in the P or N position - Do not depress the brake pedal 2. Check “Self diagnostic result” with CONSULT-III. YES >> Refer to . NO >> Inspection End. Diagnosis Procedure INFOID:0000000004206124 1. INSPECTION START Check which type of transmission the vehicle is equipped with. CVT >> GO TO 2 M/T >> GO TO 5 2. CHECK DTC WITH BCM Is the inspection result normal? YES >> GO TO 3 NO >> Repair or replace malfunctioning parts. 3. CHECK PNP SWITCH INPUT SIGNAL 1. Turn ignition switch OFF. 2. Disconnect IPDM E/R harness connector. 3. Turn ignition switch ON. DTC No. Trouble diagnosis name DTC detecting condition Possible cause B210F INTER LOCK/PNP SW IPDM E/R detects a mismatch between the signals • Harness or connectors [Park/neutral position (PNP) switch • Clutch interlock switch (M/T mod- els) • Park/neutral position (PNP) switch (CVT models) |