|
|
BCS-18 < FUNCTION DIAGNOSIS > [BCM] DIAGNOSIS SYSTEM (BCM) DIAGNOSIS SYSTEM (BCM) COMMON ITEM INFOID:0000000004202236 BCM CONSULT-III FUNCTION CONSULT-III performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions for each system. NOTE: It can perform the diagnosis modes except the following for all sub system selection items. COMMON ITEM : CONSULT-III Function INFOID:0000000004202237 ECU IDENTIFICATION Displays the BCM part No. SELF-DIAG RESULT Diagnosis mode Function Description WORK SUPPORT Changes the setting for each system function. SELF-DIAG RESULTS Displays the diagnosis results judged by BCM. CAN DIAG SUPPORT MNTR Monitors the reception status of CAN communication viewed from BCM. DATA MONITOR The BCM input/output signals are displayed. ACTIVE TEST The signals used to activate each device are forcibly supplied from BCM. ECU IDENTIFICATION The BCM part number is displayed. CONFIGURATION This function is not used even though it is displayed. System Sub system selection item Diagnosis mode WORK SUPPORT DATA MONITOR ACTIVE TEST Door lock DOOR LOCK × × × Rear window defogger REAR DEFOGGER × × Warning chime BUZZER × × Interior room lamp timer INT LAMP × × × Remote keyless entry system MUTI REMOTE ENT × × × Exterior lamp HEADLAMP × × × Wiper and washer WIPER × × × Turn signal and hazard warning lamps FLASHER × × × Air conditioner AIR CONDITONER × Intelligent Key system INTELLIGENT KEY × × × Combination switch COMB SW × BCM BCM × Immobilizer IMMU × × Interior room lamp battery saver BATTERY SAVER × × × Trunk open TRUNK × Vehicle security system THEFT ALM × × × RAP system RETAINED PWR × Signal buffer system SIGNAL BUFFER × × TPMS AIR PRESSURE MONITOR × × |