|
|
AV-348 < COMPONENT DIAGNOSIS > [BOSE AUDIO WITH NAVIGATION] SUBWOOFER (COUPE) 1. Connect BOSE speaker amp. connector B122 and suspect rear subwoofer connector. 2. Turn ignition switch to ACC. 3. Push “POWER” switch. 4. Check the signal between BOSE speaker amp. harness connec- tor B122 terminals with CONSULT-III or oscilloscope. Is the audio signal voltage as specified? YES >> Replace suspect rear subwoofer. Refer to . NO >> GO TO 3 3. HARNESS CHECK 1. Disconnect AV control unit connector M47 and BOSE speaker amp. connector B121. 2. Check continuity between AV control unit harness connector M47 (A) and BOSE speaker amp. harness connector B121 (B). 3. Check continuity between AV control unit harness connector M47 (A) and ground. Are continuity test results as specified? YES >> GO TO 4 NO >> • Check connector housings for disconnected or loose terminals. • Repair harness or connector. 4. REAR SUBWOOFER SIGNAL CHECK Connector Terminals Condition Reference signal (+) (-) B122 53 48 Receive au- 45 46 ALNIA0932GB SKIA0177E A B. Continuity Connector Terminal Connector Terminal M47 5 B121 64 Yes 6 63 14 66 15 65 A — Continuity Connector Terminal M47 5 Ground No 6 14 15 ALLIA0253ZZ |