|
|
10. Install oil pan. b. Install new oil pan gasket on transmission case. I Always replace oil pan bolts as they are self-sealing bolts. I Before installing bolts, remove traces of sealant and oil I Tighten four bolts in a criss-cross pattern to prevent dis- d. Tighten drain plug. 11. Install park/neutral position switch. d. Tighten bolts while inserting 4.0 mm (0.157 in) dia. pin vertically into locating holes in park/neutral position switch and manual 12. Install torque converter. I Approximately 2 liters (1-3/4 Imp qt) of fluid are required for I When reusing old torque converter, add the same amount SAT011B NAT291 NAT292 NAT290 SAT428DA ASSEMBLY Assembly (2) (Cont’d) AT-193 |