|
|
DIAGNOSIS SYSTEM (TCM) TM-39 < SYSTEM DESCRIPTION > C E F G H I J K L M A B TM N O P 4GR INCORRECT RA- • A/T cannot shift to 4GR P0734 P0734 5GR INCORRECT RA- • A/T cannot shift to 5GR P0735 P0735 TORQUE CONVERT- • Normal voltage not applied to solenoid due to cut line, short, or the like P0740 P0740 TORQUE CONVERT- • A/T cannot perform lock-up even if electrical circuit is good. • TCM detects as irregular by comparing difference val- ue with slip rotation. P0744 P0744*2 PC SOLENOID A • Normal voltage not applied to solenoid due to cut line, short, or the like • TCM detects as irregular by comparing target value with monitor value. P0745 P0745 TP SENSOR • TCM does not receive the proper accelerator pedal po- sition signals (input by CAN communication) from P1705 — TRANS FLUID TEMP • During running, the ATF temperature sensor signal voltage is excessively high or low • A/T fluid temperature does not rise to the specified temperature after driving for a certain period of time. • There is a certain temperature difference between A/ T fluid and engine coolant. P1710 P0710 VEHICLE SPEED SIG- • Vehicle speed signal (CAN communication) from com- bination meter not input due to cut line or the like • Unexpected signal input during running P1721 — INTERLOCK • Except during shift change, the gear position and ATF pressure switch states are monitored and comparative P1730 P1730 1GR E/BRAKING • Each ATF pressure switch and solenoid current is monitored and if a pattern is detected having engine P1731 — INPUT CLUTCH SOL • Normal voltage not applied to solenoid due to function- al malfunction, cut line, short, or the like • TCM detects as irregular by comparing target value with monitor value. P1752 P1752 FR BRAKE SOLENOID • Normal voltage not applied to solenoid due to function- al malfunction, cut line, short, or the like • TCM detects as irregular by comparing target value with monitor value. P1757 P1757 DRCT CLUTCH SOL • Normal voltage not applied to solenoid due to cut line, short, or the like • TCM detects as irregular by comparing target value with monitor value. P1762 P1762 HLR CLUTCH SOLE- • Normal voltage not applied to solenoid due to function- al malfunction, cut line, short, or the like • TCM detects as irregular by comparing target value with monitor value. P1767 P1767 L C BRAKE SOLENOID • Normal voltage not applied to solenoid due to function- al malfunction, cut line, short, or the like P1772 P1772 Items (CONSULT screen terms) Malfunction is detected when... TCM self-di- agnosis OBD (DTC) Reference page “TRANSMIS- SION” with CONSULT MIL indicator GINE” with CONSULT or GST |