|
|
WCS-10 < SYSTEM DESCRIPTION > DIAGNOSIS SYSTEM (COMBINATION METER) DIAGNOSIS SYSTEM (COMBINATION METER) TYPE A INFOID:0000000009507070 ON BOARD DIAGNOSIS ITEM The information display, speedometer and tachometer can be checked in self-diagnosis mode. NOTE: • Check combination meter power supply and ground circuits if self-diagnosis mode does not start. Refer to MWI-94, "COMBINATION METER : Diagnosis Procedure" . Replace combination meter if power supply and ground circuits are found to be normal and self-diagnosis mode does not start. Refer to • Combination meter self-diagnosis mode will function with the ignition switch in ON. Combination meter self- diagnosis mode will exit upon turning the ignition switch to OFF. METHOD OF STARTING 1. Turn the ignition switch OFF. 2. Turn the ignition switch ON while pressing and holding the switch (1) for 0.8 seconds or more. 3. Press the switch at least 3 times. (Within 7 seconds after the ignition switch is turned ON.) • All segments of the information display are displayed. JSNIA3917ZZ JSNIA3891ZZ |