|
|
PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED ON EXL-97 < SYMPTOM DIAGNOSIS > C D E F G H I J K M A B EXL N O P PARKING, LICENSE PLATE AND TAIL LAMPS ARE NOT TURNED ON Description INFOID:0000000009269661 The parking, license plate and tail lamps do not turn ON in any combination switch (lighting and turn signal switch) position. Diagnosis Procedure INFOID:0000000009269662 1. COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION Check the combination switch (lighting and turn signal switch). Refer to ligent Key) or (without Intelligent Key). Is the combination switch (lighting and turn signal switch) normal? YES >> GO TO 2. NO >> Repair or replace the malfunctioning part. 2. CHECK TAIL LAMP RELAY REQUEST SIGNAL INPUT CONSULT DATA MONITOR 1. Select TAIL & CLR REQ of IPDM E/R DATA MONITOR item. 2. While operating the combination switch (lighting and turn signal switch), check the monitor status. Is the item status normal? YES >> GO TO 3. NO >> Replace BCM. Refer to BCS-69, "Removal and Installation" (with Intelligent Key) or (without Intelligent Key). 3. PARK LAMP CIRCUIT INSPECTION Check the parking lamp circuit. Refer to EXL-11, "PARKING, LICENSE PLATE AND TAIL LAMP SYSTEM : Is the tail lamp circuit normal? YES >> Replace IPDM E/R. Refer to PCS-30, "Removal and Installation" (with Intelligent Key) or (without Intelligent Key). NO >> Repair or replace the malfunctioning part. Monitor item Condition Monitor status TAIL & CLR REQ Combination switch (lighting and turn signal switch) 1st ON OFF OFF |