Nissan Rogue. Manual - part 807

MAP LAMP ASSEMBLY

INL-55

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

M

A

B

INL

N

O

P

REMOVAL AND INSTALLATION

MAP LAMP ASSEMBLY

Exploded View

INFOID:0000000011279222

Removal and Installation

INFOID:0000000011279223

REMOVAL

1. Lower front edge of map lamp assembly (1) down from the

headlining by releasing the metals clips, then slide forward to

clear pawls at rear.

: Metal clip
: Pawl

2. Disconnect the harness connectors from map lamp assembly and remove.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

1.

Headlining

2.

Map lamp assembly bracket 
(without moonroof)

3.

Map lamp assembly bracket 
(with moonroof)

4.

Moonroof switch finisher

5.

Map lamp assembly

6.

Map lamp

Metal clip

Clip

Pawl

Front

AWLIA2502ZZ

ALLIA1150ZZ

INL-56

< REMOVAL AND INSTALLATION >

MAP LAMP ASSEMBLY

Visually check the metal clips and pawls for deformation and damage during installation. Replace if

necessary.

Bulb Replacement

INFOID:0000000011279224

NOTE:

The map lamp bulbs are replaced as part of the map lamp.

REMOVAL

1. Remove the map lamp assembly. Refer to 

INL-55, "Removal and Installation"

.

2. Remove screws (A) from map lamp (2).
3. Release pawls and remove map lamp from the map lamp

assembly (1).

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

ALLIA1568ZZ

VANITY MIRROR LAMP

INL-57

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

M

A

B

INL

N

O

P

VANITY MIRROR LAMP

Exploded View

INFOID:0000000011279225

Removal and Installation

INFOID:0000000011279226

CAUTION:

Do not attempt to separate the vanity lamp from the sun visor or damage to the components may

occur.

The vanity lamp is replaced as part of the sun visor. Refer to 

INT-29, "Exploded View"

. 

Bulb or Lens Replacement

INFOID:0000000011279227

WARNING:

Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:

• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from

bulb surface.

• Do not leave bulb out of lamp reflector for a long time because dust, moisture, smoke, etc. may

affect the performance of lamp.

• Do not attempt to separate the vanity lamp from the sun visor or damage to the components may

occur.

1. Insert a suitable tool into the gap between the lens and vanity mirror lamp, then release the lens pawls

and remove.

2. Grasp the vanity mirror lamp bulb and pull straight out of the vanity mirror lamp to remove.
3. Install vanity mirror lamp bulb to vanity mirror lamp.
4. Install the vanity mirror lamp lens.

1.

Lens

2.

Bulb

Pawl

ALLIA1083ZZ

INL-58

< REMOVAL AND INSTALLATION >

ROOM LAMP

ROOM LAMP

Removal and Installation

INFOID:0000000011279229

WARNING:

Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:

• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from

bulb surface.

• Do not leave bulb out of reflector for a long time because moisture, smoke, etc. may affect the per-

formance of lamp.

REMOVAL

1. Lower lens (1) and room lamp as an assembly by releasing

room lamp metal clips (A) using a suitable tool.

2. Disconnect the harness connector from the room lamp and

remove.

INSTALLATION

Installation is in the reverse order of removal.

Bulb Replacement

INFOID:0000000011279230

WARNING:

Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:

• Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from

bulb surface.

• Do not leave bulb out of reflector for a long time because moisture, smoke, etc. may affect the per-

formance of lamp.

1. Remove lens (1) by inserting suitable tool and releasing LH side

(switch side) first.

2. Remove room lamp bulb (2).
3. Install room lamp bulb (2).
4. Install room lamp lens (1).

NOTE:

Insert the lens hook end (RH side) first to install lens.

PKIC1049E

PKIC1048E