|
|
EM-62 < ON-VEHICLE REPAIR > [QR25DE] CYLINDER HEAD CYLINDER HEAD Removal and Installation INFOID:0000000004211256 REMOVAL 1. Remove the timing chain. Refer to EM-51, "Removal and Installation" 2. Remove the camshafts. Refer to EM-40, "Removal and Installation" 3. Remove spark plugs. Refer to EM-12, "Removal and Installation" 4. Remove the front suspension member. Refer to FSU-14, "Removal and Installation" 5. Disconnect the electric compressor. Refer to HA-31, "Removal and Installation" . 6. Remove cylinder head loosening bolts in the order as shown, using power tool. 7. If necessary to transfer to new cylinder head or remove for reconditioning, remove the intake manifold collector, intake man- ifold, and fuel tube assembly. Refer to . INSPECTION AFTER REMOVAL Outer Diameter of Cylinder Head Bolts • Cylinder head bolts are tightened by plastic zone tightening method. Whenever the size difference between d1 and d2 exceeds the limit, replace the bolts with new ones. 1. Cylinder head 2. Cylinder head gasket 3. Cylinder head bolt A. Follow installation procedure AWBIA0066ZZ WBIA0033E |