|
|
CAMSHAFT EM-193 < REMOVAL AND INSTALLATION > [VQ40DE] C D E F G H I J K L M A EM N P O Removal and Installation INFOID:0000000009478137 REMOVAL 1. Release the fuel pressure. Refer to . 2. Disconnect the battery negative terminal. Refer to PG-83, "Removal and Installation" 3. Remove front wheels and tires. Refer to 4. Remove front fender protectors. Refer to EXT-27, "Removal and Installation of Front Fender Protector" 5. Remove intake manifold collector. Refer to EM-142, "Removal and Installation" 6. Remove rocker covers. Refer to EM-158, "Removal and Installation" . 7. Remove front timing chain case, camshaft sprockets, timing chains and rear timing chain case. Refer to EM-176, "Removal and Installation" EM-187, "Removal and Installation" 8. Remove camshaft position sensor (PHASE) (right and left banks) from cylinder head back side. CAUTION: • Handle carefully to avoid dropping and shocks. • Do not disassemble. • Do not allow metal powder to adhere to magnetic part at sensor tip. • Do not place sensors in a location where they are exposed to magnetism. 9. Remove intake valve timing control solenoid valves. • Discard intake valve timing control solenoid valve gaskets and use new gaskets for installation. 10. Remove camshaft brackets. • Mark camshafts, camshaft brackets and bolts so they are placed in the same position and direction for installation. KBIA1046E WBIA0169E |