|
|
P2122, P2123 APP SENSOR EC-903 < DTC/CIRCUIT DIAGNOSIS > [VQ40DE FOR USA AND CANADA] C D E F G H I J K L M A EC N P O 6. REPLACE ACCELERATOR PEDAL ASSEMBLY 1. Replace accelerator pedal assembly. Refer to 2. Perform EC-590, "Accelerator Pedal Released Position Learning" . 3. Perform EC-591, "Throttle Valve Closed Position Learning" 4. Perform EC-591, "Idle Air Volume Learning" . >> INSPECTION END 7. CHECK INTERMITTENT INCIDENT GI-42, "Intermittent Incident" . >> INSPECTION END Component Inspection INFOID:0000000009481611 ACCELERATOR PEDAL POSITION SENSOR 1. Reconnect all harness connectors disconnected. under the following conditions. 4. If NG, replace accelerator pedal assembly and go to next step. EC-590, "Accelerator Pedal Released Position Learning" . 6. Perform EC-591, "Throttle Valve Closed Position Learning" 7. Perform EC-591, "Idle Air Volume Learning" . Terminal Accelerator pedal Voltage 97 Fully released 0.65 - 0.87V Fully depressed More than 4.3V 98 Fully released 0.28 - 0.48V Fully depressed More than 2.0V |