|
|
DLN-122 < UNIT DISASSEMBLY AND ASSEMBLY > [TRANSFER: TX15B] PLANETARY CARRIER Check the internal gear teeth for damage, partial wear, dents or other abnormality. If any is found, replace the internal gear with a new one. ASSEMBLY 1. Apply ATF to the new metal bushing, then install the new metal bushing until it becomes Dimension (A) using Tool. CAUTION: Do not reuse metal bushing. 2. Apply ATF to the new needle bearing, then install the new nee- dle bearing until it becomes Dimension (B) using Tool. CAUTION: Do not reuse needle bearing. 3. Install the carrier bearing to the sun gear using Tools. 4. Install the new snap ring to the sun gear assembly using suitable tool. CAUTION: Do not reuse snap ring. PDIA0157E Tool number : ST35300000 ( — ) Dimension (A) : 7.7 - 8.3mm (0.303 - 0.327in) SDIA3189E Tool number : ST33220000 ( — ) Dimension (B) : 62.5 - 63.1mm (2.461 - 2.484in) SDIA3190E Tool number (A): ST30720000 (J-25405) PDIA0149E SDIA2353E |