|
|
Content .. 1288 1289 1290 1291 ..
ASSEMBLY TM-371 < UNIT DISASSEMBLY AND ASSEMBLY > [5AT: RE5R05A] C E F G H I J K L M A B TM N O P 34. Install rear extension assembly (2WD models) or adapter case assembly (4WD models) according to the following procedures. a. 2WD models Apply recommended sealant (Genuine Anaerobic Liquid Gasket or equivalent. Refer to GI-21, "Recommended Chemical Prod- .) to rear extension assembly as shown. CAUTION: Completely remove all moisture, oil, old sealant and any foreign material from the transmission case and rear exten- sion assembly mating surfaces. ii. Install rear extension assembly to transmission case. CAUTION: Insert the tip of parking rod between the parking pawl and the parking actuator support when assembling the rear extension assembly. iii. Install the bracket (1), (2) and rear extension assembly bolts and tighten to the specified torque. • Self sealing bolt (3) • Bolt (A) CAUTION: Do not reuse self-sealing bolt. b. 4WD models Install gasket onto transmission case. CAUTION: • Completely remove all moisture, oil, old gasket and any foreign material from the transmission case and adapter case assembly mating surfaces. • Do not reuse gasket. SCIA5212E SCIA5029E Rear extension : 52 N·m (5.3 kg-m, 38 ft-lb) Self-sealing bolt : 61 N·m (6.2 kg-m, 45 ft-lb) JSDIA0293ZZ SCIA5231E |