|
|
BR-36 < REMOVAL AND INSTALLATION > FRONT DISC BRAKE 2. Remove the union bolt then disconnect the brake hose and dis- card the copper sealing washers. CAUTION: Do not reuse copper sealing washers. 3. Remove the sliding pin bolts and remove the caliper body from the torque member. 4. Remove the brake pads, shims, shim cover and retainers from the torque member. mark as shown for installation. CAUTION: Put matching marks on the wheel hub assembly and disc rotor, if reusing the disc rotor. INSTALLATION 1. Install the disc rotor. If reusing the disc rotor, align the matching marks as shown for installation. CAUTION: Align the matching marks on the wheel hub assembly and disc rotor, if reusing the disc rotor. 2. Install torque member and tighten the torque member bolts to specification. Refer to . 3. Install the brake pads, shims, shim covers and retainers on the torque member. Refer to LFIA0235E AWFIA0788ZZ SDIA2608E SDIA2608E |