|
|
BR-46 < REMOVAL AND INSTALLATION > REAR DISC BRAKE • Do not deform the pad retainer (2) when removing the pad retainer from the torque member (1). • Do not damage the piston boot. • Do not drop the brake pads, shims, and the shim covers. • Remember each position of the removed brake pads. INSTALLATION 1. Install the pad retainers (1) to the torque member (2) if the pad retainers have been removed. CAUTION: • Securely assemble the pad retainers so that it will not be lifted up from the torque member. • Do not deform the pad retainers. 2. Apply Molykote AS880N or equivalent to the mating faces (A) between the brake pads (1) and the shims (2), and install the shims and shim covers (3) to the brake pad. CAUTION: Always replace the shim and shim cover when replacing the brake pad. 3. Install the brake pads to the torque member. CAUTION: Do not damage the piston boot. 5. Install brake caliper to torque member. WT-47, "Removal and Installation" BRAKE CALIPER ASSEMBLY INFOID:0000000009756023 JPFIA0118ZZ PFIA0763J JSFIA1336ZZ |