|
|
2. Attach tightly the air bag module bracket [SST: KV99105300] in a vise. 3. Insert the stud bolts of side air bag module into the two holes in air bag module bracket held in vise and fix them with two CAUTION: Side air bag module should be secured to air bag module 4. Connect deployment tool adapter [SST: KV99108300] to deployment tool [SST: KV99106400] connector and connec- 5. Connect red clip of deployment tool to battery positive termi- nal and black clip to negative terminal. 6. The lamp on the right side of the tool, marked “deployment tool power” should glow green, not red. 7. Press the button on the deployment tool. The left side lamp on the tool, marked “air bag connector voltage”, will illummi- CAUTION: When deploying the air bag module, stand at least 5 m (16 ft) Deployment of seat belt pre-tensioner (outside of 1. Firmly anchor seat belt pre-tensioner in a vise. CAUTION: Ensure bracket and webbing are place in the vise. 2. Connect deployment tool adapter [SST: KV99108200] to deployment tool [SST: KV99106400] connector and seat belt SRS491 Front side air bag module Metal portion Air bag module bracket M6 nut UP SRS492 Deployment tool Deployment tool adapter SRS020-A Air bag module Deployment tool SBF272H Firmly place pre-tensioner NRS025 Deployment tool adapter Deployment tool SUPPLEMENTAL RESTRAINT SYSTEM (SRS) Disposal of Air Bag Module and Seat Belt RS-25 |