|
|
PG-72 < REMOVAL AND INSTALLATION > BATTERY REMOVAL AND INSTALLATION BATTERY Removal and Installation INFOID:0000000009484629 REMOVAL 1. Disconnect both negative and positive battery terminals. CAUTION: • Disconnect negative battery terminal first. • Before servicing, turn the ignition switch off and wait at least three minutes. 2. Remove battery clamp nuts and battery clamp. INSTALLATION Installation is in the reverse order of removal. CAUTION: When connecting battery terminals, connect the positive battery terminal first. Reset electronic systems as necessary. Refer to PG-7, "ADDITIONAL SERVICE WHEN REMOVING BAT- TERY NEGATIVE TERMINAL : Special Repair Requirement" . WKIA3188E Battery clamp nuts : 3.92 N·m (0.40 kg-m, 35 in-lb) Battery terminal nut : 3.4 N·m (0.35 kg-m, 30 in-lb) |