|
|
EXL-160 < REMOVAL AND INSTALLATION > FRONT FOG LAMP FRONT FOG LAMP Bulb Replacement INFOID:0000000009484960 1. Remove front portion of fender protector. Refer to EXT-22, "Removal and Installation" 2. Disconnect the harness connector from the fog lamp. CAUTION: • Do not touch the glass of bulb directly by hand. Keep grease and other oily substances away from it. Do not touch bulb by hand while it is lit or right after being turned off. Burning may result. • Do not leave bulb out of fog lamp reflector for a long time because dust, moisture smoke, etc. may affect the perfor- mance of fog lamp. When replacing bulb, be sure to replace it with new one. Removal and Installation INFOID:0000000009484961 FRONT FOG LAMP CAUTION: • Do not leave fog lamp assembly without bulb for a long period of time. Dust, moisture, smoke, etc. entering the fog lamp body may affect the performance. Remove the bulb from the headlamp assem- bly just before replacement bulb is installed. • Grasp only the plastic base when handling the bulb. Do not touch the glass envelope. Touching the glass could significantly affect the bulb life and/or fog lamp performance. NOTE: The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb. Removal 1. Remove front portion of fender protector. Refer to EXT-22, "Removal and Installation" 2. Disconnect the harness connector from the fog lamp. bumper. Installation Installation is in the reverse order of removal. LKIA0573E LKIA0574E |