|
|
SR-38 < REMOVAL AND INSTALLATION > DEPLOYMENT AND DISPOSAL The battery must show voltage of 9.6 V or more. before proceeding. • Connect red clip of deployment tool (A) to battery positive terminal and black clip to negative terminal. Check that the polarity is correct. The right side lamp in the Deployment Tool Check Press the deployment tool switch (C) to the ON position. The left Air Bag Deployment Tool Lamp Illumination Chart (Battery Connected) *: If this lamp illuminates red, the tool is connected to the battery incorrectly. Reverse the connections and check that the lamp illumi- DEPLOYMENT OF FRONT SEAT BELT PRE-TENSIONER (OUTSIDE OF VEHICLE) 1. Firmly grip pre-tensioner (1) in a vise (A) and cut off the web- 2. Connect deployment tool (SST: KV99106400) (A) and deploy- 3. Connect red clip of deployment tool to battery positive terminal 4. The lamp on the right side of the tool, marked “deployment tool 5. Press the button on the deployment tool. The left side lamp on CAUTION: JMHIA0204ZZ JMHIA0205ZZ Switch operation Left side lamp, green* “AIR BAG CONNECTOR VOLTAGE” Right side lamp, green* “DEPLOYMENT TOOL POWER” OFF OFF ON ON ON ON JMHIA0068ZZ JMHIA0214ZZ |