|
|
Diagnostic Procedure NMEC0726 1 CHECK INPUT SIGNAL CIRCUIT 1. Turn ignition switch “OFF”. terminal 45 and TCM terminal 5. Continuity should exist. OK or NG OK © GO TO 2. NG © Repair harness or connectors. 2 CHECK INPUT SIGNAL CIRCUIT 1. Check harness continuity between ECM terminals 12, 44, 45 and ground. Refer to wiring diagram. Continuity should not exist. 2. Also check harness for short to power. OK or NG OK © GO TO 3. NG © Repair short to ground or short to power in harness. 3 CHECK INTERMITTENT INCIDENT Refer to “TROUBLE DIAGNOSIS FOR INTERMITTENT INCIDENT”, EC-82. © INSPECTION END GI MA EM LC FE CL MT AT PD AX SU BR ST RS BT HA SC EL IDX DTC 0504 A/T CONTROL Diagnostic Procedure EC-151 |