|
|
1. POWER Indicator Lamp Does Not Come On NMAT0073 SYMPTOM: 1 CHECK TCM POWER SOURCE STEP 1 1. Turn ignition switch to ON position. (Do not start engine.) 2. Check voltage between TCM harness connector M25, M26 terminal Nos. 10 (G/OR), 19 (G/OR), 28 (R/W) and ground. SAT611J OK or NG OK © GO TO 2. NG © GO TO 3. 2 CHECK TCM POWER SOURCE STEP 2 1. Turn ignition switch to OFF position. SAT612JE OK or NG OK © GO TO 4. NG © GO TO 3. 3 DETECT MALFUNCTIONING ITEM Check the following items: I Harness for short or open between ignition switch and TCM terminals 10, 19 and 28 (Main harness) I Ignition switch and 10A fuse [No. 12 or 28, located in the fuse block (J/B)] OK or NG OK © GO TO 4. NG © Repair or replace damaged parts. GI MA EM LC EC FE CL MT PD AX SU BR ST RS BT HA SC EL IDX TROUBLE DIAGNOSES FOR SYMPTOMS 1. POWER Indicator Lamp Does Not Come On AT-149 |