Content .. 122 123 124 125 ..

Nissan Almera Tino V10 (2001 year). Manual - part 124

MODELS WITH FUSE AND FUSIBLE LINK BOX E90

NLEL0089S02

YEL446C

POWER SUNROOF

Wiring Diagram — SROOF — (Cont’d)

EL-239

Trouble Diagnoses

NLEL0225

Symptom

Possible cause

Repair order

Power sunroof cannot be operated
using any switch.

1. 10A fuse, 30A fusible link and

M4 circuit breaker

2. Sunroof motor ground circuit
3. Sunroof switch
4. Sunroof switch circuit
5. Sunroof motor

1. Check 10A fuse [No. 10, located in fuse block

(J/B)], 30A fusible link and M4 circuit breaker. Verify
battery positive voltage is present at terminal 5 of
sunroof motor. And then turn ignition switch “ON”
and verify battery positive voltage is present at ter-
minal 5 of sunroof switch.

2. Check sunroof motor ground circuit.
3. Check sunroof switch.
4. Check harness between sunroof switch and sunroof

motor.

5. Check sunroof motor.

Power sunroof cannot be operated
using one of the sunroof switches.

1. Sunroof switch
2. Sunroof switch circuit

1. Check sunroof switch.
2. Check the harness between sunroof motor and sun-

roof switch.

POWER SUNROOF

Trouble Diagnoses

EL-240

Wiring Diagram — MIRROR —

NLEL0472

MODELS WITH FUSE AND FUSIBLE LINK BOX E43

NLEL0472S03

LHD models

NLEL0472S0304

YEL925B

DOOR MIRROR

Wiring Diagram — MIRROR —

EL-241

RHD models

NLEL0472S0305

YEL926B

DOOR MIRROR

Wiring Diagram — MIRROR — (Cont’d)

EL-242

MODELS WITH FUSE AND FUSIBLE LINK BOX E90

NLEL0472S04

LHD models

NLEL0472S0404

YEL447C

DOOR MIRROR

Wiring Diagram — MIRROR — (Cont’d)

EL-243

RHD models

NLEL0472S0405

YEL448C

DOOR MIRROR

Wiring Diagram — MIRROR — (Cont’d)

EL-244

System Description

=NLEL0498

Power is supplied at all times

from 30A fusible link

to circuit breaker terminal 1

through circuit breaker terminal 2

to power window relay terminal 5

With ignition switch in ON or START position, power is supplied

through 10A fuse [No. 10, located in the fuse block (J/B)]

to power window relay terminal 1

Ground is supplied to power window relay terminal 2

through body grounds M28 and M48.

The power window relay is energized and power is supplied

through power window relay terminal 3

to power window main switch terminal 1,

to front power window sub-switch terminal 5,

to rear power window sub-switch LH and RH terminals 5 (models with rear power window).

MANUAL OPERATION

NLEL0498S01

Front Door (Driver Side)

NLEL0498S0101

Ground is supplied

to power window main switch terminal 3

through body grounds M28 and M48.

WINDOW UP
When the driver’s window switch in the power window main switch is pressed in the up position, power is
supplied

through power window main switch terminal 9

to driver side power window regulator terminal 1.

Ground is supplied

through power window main switch terminal 2

to driver side power window regulator terminal 8.

Then, the motor raises the window until the switch is released.
WINDOW DOWN
When the driver’s window switch in the power window main switch is pressed in the down position, power is
supplied

through power window main switch terminal 8

to driver side power window regulator terminal 2.

Ground is supplied

to driver side power window regulator terminal 1

through power window main switch terminal 9.

Then, the motor lowers the window until the switch is released.

Front Door (Passenger Side)

NLEL0498S0102

Ground is supplied

to power window main switch terminal 3

through body grounds M28 and M48.

NOTE:
Numbers in parentheses are terminal numbers, when power window switch is pressed in the UP and DOWN
positions respectively.
POWER WINDOW MAIN SWITCH OPERATION
Power is supplied

through power window main switch (5, 6)

to front power window sub-switch (3, 4).

POWER WINDOW

System Description

EL-245

The subsequent operation is the same as the front power window sub-switch operation.
FRONT POWER WINDOW SUB-SWITCH OPERATION
Power is supplied

through front power window sub-switch (1, 2)

to front passenger side power window regulator (1, 2).

Ground is supplied

to front passenger side power window regulator (2, 1)

through front power window sub-switch (2, 1)

to front power window sub-switch (4, 3)

through power window main switch (6, 5).

Then, the motor raises or lowers the window until the switch is released.

Rear Door

NLEL0498S0103

Rear door windows will raise and lower in the same manner as passenger’s door window.

POWER WINDOW LOCK

NLEL0498S02

The power window lock is designed to lock operation of all windows except for driver’s door window.
When the lock switch is pressed to lock position, ground of the sub-switches in the power window main switch
is disconnected. This prevents the power window motors from operating.

AUTO OPERATION

NLEL0498S03

The power window AUTO feature enables the driver to open the driver’s window without holding the window
switch in the down position.
The AUTO feature operates on the driver’s window.

POWER WINDOW

System Description (Cont’d)

EL-246