|
|
CONDENSER HA-53 < REMOVAL AND INSTALLATION > C D E F G H J K L M A B HA N O P CONDENSER Removal and Installation for Condenser INFOID:0000000007356327 REMOVAL 1. Discharge the refrigerant. Refer to HA-36, "HFC-134a (R-134a) Service Procedure" . 2. Remove the radiator. Refer to CO-46, "Removal and Installation" (VQ40DE). CAUTION: Be careful not to damage the core surface of the condenser and the radiator. 3. Disconnect the front high-pressure flexible A/C hose and the front high-pressure A/C pipe from the con- denser. CAUTION: Cap or wrap the joint of the pipes with suitable material such as vinyl tape to avoid the entry of air. 4. Disconnect the refrigerant pressure sensor harness connector. the condenser. NOTE: The condenser and liquid tank are serviced as an assembly. INSTALLATION Installation is in the reverse order of removal. CAUTION: • Do not reuse O-rings. • Apply A/C oil to the O-rings of the front high-pressure A/C pipe, refrigerant pressure sensor, and front high-pressure flexible A/C hose for installation. • After charging refrigerant, check for leaks. • Replace the mounting grommets as necessary. LJIA0177E August 2012 2012 Pathfinder |