|
|
FRONT DOOR LOCK ACTUATOR LH (DOOR UNLOCK SENSOR) DLK-71 < DTC/CIRCUIT DIAGNOSIS > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B DLK N O P 3. CHECK UNLOCK SENSOR GROUND CIRCUIT Check continuity between front door lock assembly LH (door unlock sensor) harness connector D14 terminal 4 and ground. Is the inspection result normal? YES >> GO TO 4 NO >> Repair or replace harness. 4. CHECK INTELLIGENT KEY UNIT OUTPUT SIGNAL 1. Connect Intelligent Key unit harness connector. 2. Check voltage between Intelligent Key unit harness connector M164 terminal 28 and ground. Is the inspection result normal? YES >> Refer to DLK-71, "Component Inspection" NO >> Replace Intelligent Key unit. Refer to . Component Inspection INFOID:0000000007355435 1. CHECK DOOR UNLOCK SENSOR Check door unlock sensor. Is the inspection result normal? YES >> Inspection End. NO >> Replace front lock assembly LH (door unlock sensor). Refer to DLK-202, "Removal and Installa- . 4 – Ground : Continuity should exist. ALKIA1186ZZ 28 – Ground : Approx. 5V WIIA1193E ALKIA1187ZZ Terminal Front door lock assembly LH condition Continuity Front door lock assembly LH 4 6 Unlock Yes Lock No August 2012 2012 Pathfinder 2012 Pathfinder |